Hey guys, was wondering if it is possible to separate the short fuel hose from the top of the fuel injectors for a 1.9L T3 in order to clean them
using an ultrasonic cleaner with injector cleaning fluid.
TIA
68 Baja - It's a growing pain!
58 Baja ute - and the pain spreads!
85 T3 Kombi - still growing
89 T3 Kombi - parts car
Old Dubber
Wolfsburg Wizard
Posts: 605
Threads: 25
Registered: August 26th, 2002
Member Is Offline
Location: Everton Hills, Brisbane, QLD, Australia 4053
Theme: UltimaBB Pro Blue ( Default )
Mood: great!
posted on January 14th, 2015 at 04:20 PM
Yes, the originals hoses are crimped on with a steel band. Just cut them off and replace with new fuel injection hose and fuel injection clamps.
Thanks old dubber. Managed to get them off by cutting them. They weren't actually crimped on, though they looked like they were.it was the barbs
holding them with the metal squashing them. Was able to push the new hose into the metal as well and couldn't pull it out when I tried to.
68 Baja - It's a growing pain!
58 Baja ute - and the pain spreads!
85 T3 Kombi - still growing
89 T3 Kombi - parts car
