| [ Total Views: 864 | Total Replies: 12 | Thread Id: 108278 ] |
|
|
 m4co
Seriously Crusin Dubber
Posts: 143
Threads: 37
Registered: January 21st, 2014
Member Is Offline
Location: Melbournem West
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 2nd, 2015 at 12:42 PM |
|
|
Drop spindle brake hose issue
Hi all,
Has anyone had a issue with the brake hoses when using 2.5" drop spindles with a standard beam? I installed a pair and it pushed out the the drums to
where at full lock there is strain on the brake hose.
Roughly measuring the hose on the car I think they are the correct 65' hoses and are about 450mm. Would it work if I used some T2 1950-55 hoses that
are 490mm long. As in, would it thread in the brake cylinder and hard line?
http://www.justkampers.com.au/113-611-701-front-brake-flexihose-for-vw-t2-spl...
I'm just worried that it's EMPI, anything that I have got from them isn't very good quality.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 2nd, 2015 at 01:00 PM |
|
|
| Quote: |
I'm just worried that it's EMPI, anything that I have got from them isn't very good quality.
|
You hit the NAIL ON THE HEAD there
who supplied you the drop spindles they should be able to tell you what length you will need
|
|
|
bugmaniaar
Officially Full-On Dubber
Posts: 295
Threads: 18
Registered: June 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 2nd, 2015 at 05:02 PM |
|
|
Had a similar problen with a drop/disk brake conversion,needed about an extra 6 cm from memory.
Trip to the local brake guy sorted it out. 2 new hoses of the correct length.....
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on February 4th, 2015 at 06:43 PM |
|
|
does your beam still have the steering arm lock stops
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on February 4th, 2015 at 07:00 PM |
|
|
Looks like a link pin front end, no steering stops.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 4th, 2015 at 07:12 PM |
|
|
Hmm, looking at that I'd say that even a std spindle would give you the same issue. If you un do the hose and hold it at the point the drum on a std
spindle would sit then see what happens.
LP beams have no steering stops as the LP knuckle acts as the steering stop.
Upto 64 were 470mm, 65-66 were 440mm and 66> were 380mm
Not sure why the 65-66 were a bit shorter for only a short time but looks like 470mm is what you should have, altho still towards the end of it's
travel by the looks of your picture.
Maybe get Enzed to make you a pair?
madness is in the eye of the beholder  |
|
|
m4co
Seriously Crusin Dubber
Posts: 143
Threads: 37
Registered: January 21st, 2014
Member Is Offline
Location: Melbournem West
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 10th, 2015 at 10:13 PM |
|
|
Problem fixed!
The chassis is a '65 and had 450mm brake hoses, I ordered 490mm hoses and they are the perfect length now 
Replaced the back hoses as well while I was at it.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 11th, 2015 at 07:46 PM |
|
|
Good News man 
You will need to rotate the hose to solid line join so that the hose doesn't loop downwards. This was a fail I had to fix when getting my RWC so
thought I best let you know in advance
madness is in the eye of the beholder |
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on February 11th, 2015 at 10:05 PM |
|
|
That first pic in "problem fixed" looks like you have too much toe out on turns. Do the tyres rub on the floor pan? I have a set of dropped spindles
on my Drag Car and had the problem with too much turn - noticed a small casting on the spindle- can't remember if it already drilled and tapped or if
I did it- but I have a 6mm bolt screwed in it and it fixed too much toe out, so no more tyre rubbing, fixed the brake hose problem as well.The head of
the bolt limits the amount of turning of the spindle.
|
|
|
m4co
Seriously Crusin Dubber
Posts: 143
Threads: 37
Registered: January 21st, 2014
Member Is Offline
Location: Melbournem West
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 17th, 2015 at 11:33 AM |
|
|
| Quote: | Originally
posted by psimitar
Good News man
You will need to rotate the hose to solid line join so that the hose doesn't loop downwards. This was a fail I had to fix when getting my RWC so
thought I best let you know in advance
|
Thanks for the heads up!
| Quote: | Originally
posted by nbturbo
That first pic in "problem fixed" looks like you have too much toe out on turns. Do the tyres rub on the floor pan? I have a set of dropped spindles
on my Drag Car and had the problem with too much turn - noticed a small casting on the spindle- can't remember if it already drilled and tapped or if
I did it- but I have a 6mm bolt screwed in it and it fixed too much toe out, so no more tyre rubbing, fixed the brake hose problem as well.The head of
the bolt limits the amount of turning of the spindle.
|
I did have too much toe out with the origional spindles but I think it was due to worn out tie rods, once I replacded the tie rods and now with the
drop spindles installed the wheels don't touch the pan any more.
This is how it was with the worn tie rods and origional spindles.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 17th, 2015 at 12:25 PM |
|
|
Hi
It can be tedious but you can make lock stops by fitting a longer bolt in the leading brake backing hole, if it protrudes enough it will limit lock,
VW did from the factory.
It can be tedious because you have to keep trimming the bolt down to the correct length.
Steve
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 17th, 2015 at 12:27 PM |
|
|
On second thought the area where bolt would normally hit might have changed with drop spindles
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on February 18th, 2015 at 08:07 AM |
|
|
You are correct Steve- the bolt is nowhere near a normal spindle would be. Looks like the dropped spindle has this small casting just for using a
limiting bolt. Was lucky with mine that a 6mm bolt was just right.
|
|
|
