| [ Total Views: 670 | Total Replies: 3 | Thread Id: 108547 ] |
|
|
 lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on March 8th, 2015 at 06:16 PM |
|
|
Beetle wheel alignment query - anyone had one in Perth?
Hi guys,
I'm certain the alignment on my 67' needs some attention. The front left outer tyre is wearing unevenly and it does pull ever so slightly to the
left.
The steering is quite heavy for a light car with 165's all round but that may not be indicative of a problem. I only have my 72' super to compare it
to, but that had 185's and notably lighter steering.
It's not a major problem and the steering free play is minimal and within the inch(!!) that the Haynes manual says is acceptable.
I have checked all of the bushes underneath - my front bump stops are knackered and I have replacements on order but the rest are okay. I regularly
grease my king pins and the beam points, and the steering damper, tie rod ends etc have all recently been replaced though I will do the shocks soon.
Anything else I should be looking at?
Given its a link pin beam axle I don't know who to take it to for an alignment .. Has anyone got a recommendation for someone in Perth for old vee
dubs?
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on March 8th, 2015 at 09:45 PM |
|
|
I doubt that I'm telling you anything you don't know, but there's a mob in Freo that specialise in dubs, least there was a couple or 3 years ago
when I was over there in the wench, can't remember their name though I could find it if you need me to. Gave me great service and defiantly knew
their stuff .
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on March 8th, 2015 at 09:49 PM |
|
|
HAve you physically checked the KP and LP bushes aren't excessively worn? Front wheels off the ground and wiggling the tyre at 6 n 12? When was the
last time you adjusted the LP pins?
As for wheel alignment, if you take your workshop manual that has the suspension settings in to a Pedders then they shouldn't have an issue setting
the suspension properly.
madness is in the eye of the beholder  |
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on March 9th, 2015 at 07:34 PM |
|
|
Thanks mate.
Did the wheel test on the weekend and it was okay but I intend to take everything from the spindle outward off soon to re pack the wheel bearings
anyway.. I'll make sure I check them.
Thanks for the advice guys!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
