[ Total Views: 1075 | Total Replies: 5 | Thread Id: 108748 ] |
|
Lo-tech
Casual Dubber
Posts: 43
Threads: 13
Registered: November 28th, 2010
Member Is Offline
Location: Down the Bay, sort of
Theme: UltimaBB Pro Blue ( Default )
Mood: Delusionally optimistic
|
posted on April 6th, 2015 at 03:58 PM |
|
|
72-on speedo cable - is it longer?
I'm retrofitting Australian-made 72-onwards instruments to my 71 fasty, which has snapped a speedo cable (prior to that the odo was cactus anyway,
and I had a 72 speedo hanging around regardless). I know the plastic threaded cable attachment nut is a slightly smaller diameter, but is there any
additional length in the later cables to compensate for the fact that the cable attachment point is square to the rear of the speedo, rather than
angled as in the earlier instruments? And are these later cables available, and if so, who would you recommend?
|
|
ragged
A.k.a.: David
Wolfsburg Wizard
Just ask if you need HELP!
Posts: 478
Threads: 46
Registered: January 25th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue
Mood: Medication seems to be working
|
posted on April 6th, 2015 at 04:50 PM |
|
|
I'd be guessing, but I think you may have a left hand drive speedo? The early and late cables are the same. Dave
|
|
Lo-tech
Casual Dubber
Posts: 43
Threads: 13
Registered: November 28th, 2010
Member Is Offline
Location: Down the Bay, sort of
Theme: UltimaBB Pro Blue ( Default )
Mood: Delusionally optimistic
|
posted on April 6th, 2015 at 05:09 PM |
|
|
Well, the securing nut diameters are definitely different. And the late-model instruments were made in Australia by VDO Melbourne, so I'm pretty sure
they're RHD only.
|
|
Lo-tech
Casual Dubber
Posts: 43
Threads: 13
Registered: November 28th, 2010
Member Is Offline
Location: Down the Bay, sort of
Theme: UltimaBB Pro Blue ( Default )
Mood: Delusionally optimistic
|
posted on April 11th, 2015 at 12:30 AM |
|
|
Sorted it out. Just for the record, an OEM Gemo cable marked Type 1, 71-onwards, is a good 300mm longer than the original Type 3 one and gives plenty
of extra loop for the right-angled speedo drive on the Australian 72-on speedo. Since nothing's easy, I had to cut out extra metal from the steel
webbing support behind the instrument panel on my '71 to give the cable extra clearance to go in square so the '72 speedo would go all the way into
its hole without bending the cable at a stupid angle. Solved the problem of the too-big speedo nut with quite a few turns of plumbers' PTFE tape.
Real snug - there's nothing that stuff can't do.
Now all I have to do is adapt the wiring harness to the new(er) instruments. Came up short trying to find a '72-on clock, but I kind of expected
that. Anybody got any recommendations for a VDO tacho of 85mm dia that looks good with '72 black-faced instruments?
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
posted on April 11th, 2015 at 09:47 AM |
|
|
I may still have a set of 73 TLE instruments, I also have a porsche tacho which is almost as big as a beetle speedo.We used to use the nut off the old
speedo cable rather than plumbers tape. PM if interested.
|
|
Lo-tech
Casual Dubber
Posts: 43
Threads: 13
Registered: November 28th, 2010
Member Is Offline
Location: Down the Bay, sort of
Theme: UltimaBB Pro Blue ( Default )
Mood: Delusionally optimistic
|
posted on April 13th, 2015 at 01:27 AM |
|
|
Hit you up with a PM.
|
|