| [ Total Views: 5917 | Total Replies: 50 | Thread Id: 108983 ] |
| Pages: 1 2 |
|
|
 lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 7th, 2015 at 12:55 PM |
|
|
1973 Type 3 Squareback
Hey all,
My wife and I were finding our 67' Beetle a bit pokey for daily use, and were thinking about a bus, when a nice type 3 squareback came up.
We decided to check it out and once we drove it we decided a type 3 would fit the bill just nicely.
It's been looked after nicely, has a full service history and manuals, has had the paint touched up and is generally straight and mostly rust free
(front left inner fender and the cover on the firewall for the fan unit has some small holes, and there's a bubble under the windscreen).
The interior is neat except for the front seat trims which I'm sourcing at the moment to be retrimmed.
It's wearing a set of Cheviots at the moment, though I'd like some standard wheels and hubcaps.
It suffered an engine fire a while back and was repaired properly, though the engine bay still looks awful.
After finding the carbs were stuffed John at the vee dub centre supplied a good used set of German Solex 32PDSIT's for a reasonable price and I
rebuilt them, and had a friend help me tune the car.
I also replaced all the fuel lines and filter, did an oil change and tappets, some wiring repairs and a tie rod end.
So far so good .. it runs great!
Needs lots more cleaning, finishing the refurbishment of the interior and I will have those rust area's addressed soon.
This weekend I'm popping a new exhaust on (dual quiet muffler system) and doing the shifter rod bushing/coupler.
Here's some pics!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
adlbeetle66
A.k.a.: Denver
Custom Title Time!
Under the car.........again!
Posts: 1476
Threads: 98
Registered: August 15th, 2014
Member Is Offline
Location: Capalaba, Brisbane, QLD
Theme: UltimaBB Streamlined2
Mood: ICH BIN VW NUSS
|
| posted on May 7th, 2015 at 03:49 PM |
|
|
Very nice clean looking Square there!
Post more pics please!  
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 7th, 2015 at 04:55 PM |
|
|
Thanks mate!
I will post some more after this weekend once I finish replacing the awful "GT" 4 tip exhaust on it at the moment .. I'll give it a tub and a
polish and take some pics.
Wouldn't idle this morning so I think I'll be re-wiring/checking the idle jet solenoids this afternoon. I have four of them to choose from so at
least I have spares.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
oldskoolguy
Officially Full-On Dubber
Posts: 329
Threads: 13
Registered: September 6th, 2011
Member Is Offline
Location: Coffs Harbour NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Ticking over nicely.
|
| posted on May 7th, 2015 at 05:29 PM |
|
|
Very nice
You need to update your signature too!
"The best trophies are stone chips"
1969 1500 Beetle "Otis"
2008 Golf GTI
|
|
|
wombatventures
Wolfsburg Wizard
Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline
Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed
|
| posted on May 7th, 2015 at 08:55 PM |
|
|
Welcome to the Type 3 club lunar_c.
Nice looking Square.
You'll have plenty of room in that wagon area at the back. Storage up front is brilliant, we fit 2 weeks shopping in there plus grog supplies with
ours!
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 8th, 2015 at 09:54 AM |
|
|
Yeah I'm really impressed with how practical it is so far. And just how much nicer it is to drive than an early swing axle beetle, or even my old
super beetle.
Sorted out the idle problems - I checked the chokes and idle jet solenoids were getting 12v with the ignition on - yes, but the wiring was a bit
crackly so I made a new loom for them.
So 12v, check! And they click with ignition on .. Check .. But still no idle .. So I swap the left one out for a spare I had, and hey presto a perfect
idle.
So the old dogma of "if it clicks it works" may not be true ..
So that's fixed! But now my wipers aren't working .. Ahh, gotta love old cars 
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 9th, 2015 at 08:09 PM |
|
|
Got the exhaust changed over today .. It's better but I'm not 100% happy with it. It's still quite loud (sounds like a nice dub, but writing
cheques it can't cash as it's still so slow!)
I might make a new muffler section from the collector back with a single outlet on the left with the biggest muffler I can fit under there. Going to
put some more sound deadener in the back to see if that helps.
Tomorrow gear shift gets fixed and some more cleaning and repairs.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
CheapChalee
Seriously Crusin Dubber
Posts: 136
Threads: 1
Registered: March 31st, 2015
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 10th, 2015 at 11:15 AM |
|
|
Nice looking car.
Chalee
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 11th, 2015 at 11:43 AM |
|
|
Yesterday I took a little side track .. trying to improve the comfort side of things, I decided to fit some sound deadener as the tar board in the
rear foot wells had been removed, and then fit the carpets properly (it's a new set but they weren't glued in and they've been cut improperly). It
all went well, and there's no rust anywhere! Just lots of seam sealer and old carpet glue.
I used response sound deadener. Seems like a good product (about 3mm foiled backed butyl rubber) and went on easily (I used a paint roller cage). I
did the rear foot wells, under the back seat, the inner front wheel arches and along the front bulkhead (don't have many pics because it got so dark
so quickly, damn winter) I then glued the carpets down as best I could.
Today I'm going to buy a few more rolls, and do the entire rear end (behind all the trim panels) and re-do my engine hatch lid. I like a quiet car!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
pv370
Officially Full-On Dubber
Posts: 272
Threads: 38
Registered: April 7th, 2014
Member Is Offline
Location: Goulburn NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Southern Comfortably Numb
|
| posted on May 12th, 2015 at 05:50 PM |
|
|
Very NICE Square...........Mind if i ask how much you paid for it ?????
Looks to be in great shape
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 14th, 2015 at 10:58 AM |
|
|
Thanks mate.
So I finished sound deadening the rear end of the car (not under the headliner though) .. though waiting on a sheet of thick dynamat to redo the
engine hatch lid with. The cardboard/rubbery original deadener on the top and rear cargo area is in great shape so I've left that and focused on
deadening behind the trim on either side of the cargo area and in the tail gate. Relayed the carpet and I'm mostly happy with the interior but for
the front door cards (wavy and likely water damaged, will make new backings and attempt to reuse the original vinyl covering as they're in good
shape) and I will add sound deadener to inside the front doors while I'm in there in anticipation of adding a simple sound system.
It's made a big difference, though one of the best additions was a thick rubber mat from Clark rubber that I trimmed to fit the cargo area. Then
there's just the front seats to retrim and the dash pad to repair and I'll be happy. Here's a few more pics. It's quiet enough for the dog to
sleep in now ..
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
CheapChalee
Seriously Crusin Dubber
Posts: 136
Threads: 1
Registered: March 31st, 2015
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 14th, 2015 at 02:44 PM |
|
|
The dog seems to like it. Nice job.
Chalee
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 14th, 2015 at 02:54 PM |
|
|
Yeah he loves old dubs!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 16th, 2015 at 10:05 AM |
|
|
I have now ordered everything to reupholster the front seats and a big sheet of dynamat to re do the engine lid. Will be very excited to finish the
interior off properly!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
oldskoolguy
Officially Full-On Dubber
Posts: 329
Threads: 13
Registered: September 6th, 2011
Member Is Offline
Location: Coffs Harbour NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Ticking over nicely.
|
| posted on May 16th, 2015 at 10:17 AM |
|
|
Looks good
"The best trophies are stone chips"
1969 1500 Beetle "Otis"
2008 Golf GTI
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 18th, 2015 at 11:23 AM |
|
|
Cheers.
It's getting decent economy too after its second tank it's averaging 9.64l/100km in purely city driving with some 80 zone cruising.
Not happy with how it's running though - it feels like the ignition isn't advancing fast enough and it feels strangled until mid throttle, I'm
going to investigate that today. Any thoughts on the 009 dizzy vs SVDA on the type 3 1600 TP with twin solexes? I've read it was only an issue with
the 34 PICT.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
adlbeetle66
A.k.a.: Denver
Custom Title Time!
Under the car.........again!
Posts: 1476
Threads: 98
Registered: August 15th, 2014
Member Is Offline
Location: Capalaba, Brisbane, QLD
Theme: UltimaBB Streamlined2
Mood: ICH BIN VW NUSS
|
| posted on May 18th, 2015 at 04:00 PM |
|
|
Generally i thought Vacuum advance worked better on the stock engines.. i have a 1776, i'm running 009 with no vacuum...
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 22nd, 2015 at 01:41 PM |
|
|
Redid the sound deadening on the engine lid ..
Original material after the engine bay fire was pretty trashed ..
There were a few spots of surface rust and wrinkled paint from the fire, so I resprayed the lot in VHT paint left over from painting the exhaust.
Which left me a nice clean surface to cover in dynamat .. and a little bit of response butyl rubber deadener I had left over from the floor pans.
Quite a satisfying half a morning job.. and it's a little quieter now (not as big an effect as I thought) but fixing the exhaust leaks made a big
difference .. the seals included with the exhaust blew out in half a week so it was leaking from the heads and the collector flange. Fixed that with
decent steel crush gaskets now, and made a support bracket for the mufflers.
I also added an electric wash wipe in the original location (mine was missing altogether) and popped a new spray nozzle and line in. What a prick of a
job that was. All done now.. two speed wipers and wash wipe, positively modern!
Redid all the heater hoses with 2l Kombi blower fan hose which is the right size (about 63mm) and much tougher than the usual paper/foil stuff.
Working heaters are great.
Still having annoying occasional idle issues which I'm still trying to chase down. It'll idle great one day, rock steady .. and then the next, it
will run fine but as soon as the revs drop around the idle circuit it runs a bit funny and won't idle. I've checked the chokes and idle solenoids to
no avail. Hmm...
Still thinking about putting an SVDA electronic dizzy on it also but waiting until the bank balance recovers from the big seat refurbishing order I
did. I love driving this thing though.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
oldskoolguy
Officially Full-On Dubber
Posts: 329
Threads: 13
Registered: September 6th, 2011
Member Is Offline
Location: Coffs Harbour NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Ticking over nicely.
|
| posted on May 22nd, 2015 at 04:00 PM |
|
|
Neat work, it looks like you enjoy keeping busy.
"The best trophies are stone chips"
1969 1500 Beetle "Otis"
2008 Golf GTI
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 22nd, 2015 at 08:03 PM |
|
|
I'm a nurse, I don't know what to do with spare time having two old
dubs tends to keep that in check..
I'm wondering whether I should put two new idle solenoids on and see if that cures the inconsistent idle.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
modnrod
Fahrvergnugen
Posts: 978
Threads: 50
Registered: March 17th, 2011
Member Is Offline
Location: Midwest, Westoz.
Theme: UltimaBB Pro Blue
Mood: Old School Volksies!
|
| posted on May 23rd, 2015 at 05:34 AM |
|
|
| Quote: | Originally
posted by lunar_c.......... and see if that cures the inconsistent idle.
|
Sometimes caused by the screen in the fuel pump getting dirty (clean it), a few flakes of crap in the tank and lines and T-piece (blow the lines out
with air), and gum/varnish from newer fuels slowly getting through the system after having sat for a while (a bottle of F-10).
I loved my old Square, cool rides. 
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 23rd, 2015 at 07:26 PM |
|
|
Hey that's a great suggestion I didn't think of (just changed my filter under the car) .. I'll check that tomorrow when I check the plugs. Legend!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
wombatventures
Wolfsburg Wizard
Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline
Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed
|
| posted on May 26th, 2015 at 07:43 PM |
|
|
We had issues on the way home on Sunday, can't remember the last time I saw a fuel filter so full of crap. Changed it over, runs great again.
9.6l/100km is about right. We've been getting anywhere from 8.4l/100km higway running back from qld, through to 9.7 around town. Thats with an auto
too.
Can you add a photo of the electric washer bottle you've put in. Our original has no lid and I want to change it asap.
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 28th, 2015 at 11:11 AM |
|
|
Here's a pic of how I popped an electric wash wipe in the factory location. If you search "washer bottle" or "wash wipe kit" you'll find a few
different kits, this was from a seller in Victoria and cost me all of $12, make sure you order a vertical bottle if you want to put it in the factory
spot. I slightly enlarged the filler cap hole in the sheet metal but 2-3mm with a large half round file so the cap would fit through and make a
bracket to bolt the bottle in to one of the fender bolts and it was done.
I'm not sure if yours will stay have the one way valves and stuff .. I replaced all the tubing on mine and when I did this on my beetle I found it
wouldn't work with the original valves in place for the pneumatic system.
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
adlbeetle66
A.k.a.: Denver
Custom Title Time!
Under the car.........again!
Posts: 1476
Threads: 98
Registered: August 15th, 2014
Member Is Offline
Location: Capalaba, Brisbane, QLD
Theme: UltimaBB Streamlined2
Mood: ICH BIN VW NUSS
|
| posted on May 28th, 2015 at 03:34 PM |
|
|
Very neat!
P.S > you will have to update your signature!
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 29th, 2015 at 07:54 AM |
|
|
Thanks.
I finally updated my signature :P
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
adlbeetle66
A.k.a.: Denver
Custom Title Time!
Under the car.........again!
Posts: 1476
Threads: 98
Registered: August 15th, 2014
Member Is Offline
Location: Capalaba, Brisbane, QLD
Theme: UltimaBB Streamlined2
Mood: ICH BIN VW NUSS
|
| posted on May 29th, 2015 at 08:07 AM |
|
|
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 30th, 2015 at 09:32 PM |
|
|
Still plagued by inconsistent running despite swapping all the usual things.
Pondering starting fresh with a 1776/1835/1915 .. Want something with a bit more power and torque and has to be reliable and low maintenance.. Anyone
have any suggestions?
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
modnrod
Fahrvergnugen
Posts: 978
Threads: 50
Registered: March 17th, 2011
Member Is Offline
Location: Midwest, Westoz.
Theme: UltimaBB Pro Blue
Mood: Old School Volksies!
|
| posted on May 31st, 2015 at 06:34 AM |
|
|
| Quote: | Originally
posted by lunar_c
Still plagued by inconsistent running despite swapping all the usual things.
Pondering starting fresh with a 1776/1835/1915 ..
It would be a shame having bought the car and invested time and care to get peeved at it, rebuild it, only to find something
simple like a sticky breaker plate in the dizzy is still making it hesitate and cough a bit.
Maybe go see Kurt, Gerry or John for a 2nd opinion?
Want something with a bit more power and torque.........
(heads)
and has to be reliable and low maintenance........
(Engine capacity, not revs)
Anyone have any suggestions?
|
They can be bloody frustrating little things sometimes can't they?
|
|
|
lunar_c
Seriously Crusin Dubber
Posts: 155
Threads: 16
Registered: August 31st, 2006
Member Is Offline
Location: Perth, WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Excellent
|
| posted on May 31st, 2015 at 02:06 PM |
|
|
After mucking around a lot more, I have it running nicely now but still thinking about something bigger as it's still pretty sluggish!
There's a bewildering array of options, and some say my (insert capacity here) has 100k miles on it and never uses a drop of oil, others say I'd
never build another (insert capacity here) as the cylinder walls are too thin and they split if left in the sun too long!
6 Dubs in and counting..
1966 1300 Deluxe Beetle in polar white.
|
|
|
| Pages: 1 2 |
