| [ Total Views: 662 | Total Replies: 6 | Thread Id: 109026 ] |
|
|
 ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on May 13th, 2015 at 11:54 AM |
|
|
SWAP- 30mm gear oil pump
As the heading states I want to swap an unused high volume oil pump for a standard oil pump as I have just replaced the camshaft and the pump no
longer fits. I only bought the high volume unit as I couldn't find a standard one anywhere. The pump needs to fit an Engle camshaft.
Barry
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on May 13th, 2015 at 05:15 PM |
|
|
You can make it fit Barry by adjusting the depth of the drive shaft in the gear. Make sure you do a trial fit to check for clearance as sometimes you
may need to grind some clearance into the back of the pump for the 4 rivet cam.
My preference is a 26 mm pump anyway.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
fish26
A.k.a.: benito
Fahrvergnugen
Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome
|
| posted on May 13th, 2015 at 07:34 PM |
|
|
as Matt mentioned, Sound like you have interference with the cam gear bolts, switching to Allen heads or clearancing both bolt head and pump gear
backside should solve your issue
bitten by the bug..........several times
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on May 14th, 2015 at 01:32 PM |
|
|
Matt, it's the body that's interfering not the gear shaft. I wanted a standard pump just don't ask what happened to the old one!! It's a 3 bolt cam and the fit is way out by about 5 mm!.....very
slight exaggeration there, it's 3.5mm 
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on May 14th, 2015 at 04:31 PM |
|
|
Barry, all 3 rivet cams are the same, as far as the pump is concerned. Maybe the cam gear bolts are wrong, ie. too large in the head.
You can take material off the pump body but obviously only a limited amount, and it depends on where.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
pfillery
Insano Dub Head
Posts: 734
Threads: 160
Registered: December 30th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 14th, 2015 at 04:54 PM |
|
|
I've got a couple of good used standard ones here northside brissy if it helps.
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on May 15th, 2015 at 09:49 AM |
|
|
Matt, I'll give it a go there, cheers and pfillery I'll keep you in mind.
|
|
|
