| [ Total Views: 750 | Total Replies: 5 | Thread Id: 109803 ] |
|
|
 baghall
Custom Title Time!
Ben Hal Outlaw Bushranger
Posts: 1021
Threads: 131
Registered: January 15th, 2010
Member Is Offline
Location: Penrith NSW
Theme: UltimaBB Psyche Blue
Mood: Kids think I'm obsessed!
|
| posted on September 17th, 2015 at 08:35 PM |
|
|
Reversing light question
Is it normal for the reversing lights to come on when slipping through the gate for 1st and reverse in a T25 wbx, or is my switch positioned wrong?
68 Baja - It's a growing pain!
58 Baja ute - and the pain spreads!
85 T3 Kombi - still growing
89 T3 Kombi - parts car
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 19th, 2015 at 05:48 PM |
|
|
Do you mean when you put the box into 1st the light comes on briefly?
madness is in the eye of the beholder  |
|
|
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
|
| posted on September 19th, 2015 at 08:01 PM |
|
|
not sure....on mine the reverse light wouldn't stay on unless I held the shifter as far left as possible, if I let it go it would switch off.
I had to remove the washer between the switch & the gearbox to allow the switch to screw further into the box & then it would stay on.
Possibly you may need to do the opposite & add another washer or a thicker one?
[size=5] Calling all NSW Mid North Coast Veedubbers
Click Below [/size]
[size=6]Mid North
Coast VW [/size] |
|
|
baghall
Custom Title Time!
Ben Hal Outlaw Bushranger
Posts: 1021
Threads: 131
Registered: January 15th, 2010
Member Is Offline
Location: Penrith NSW
Theme: UltimaBB Psyche Blue
Mood: Kids think I'm obsessed!
|
| posted on September 20th, 2015 at 11:47 AM |
|
|
| Quote: | Originally
posted by psimitar
Do you mean when you put the box into 1st the light comes on briefly?
|
It stays on in both reverse and 1st until I take it out of gear.
68 Baja - It's a growing pain!
58 Baja ute - and the pain spreads!
85 T3 Kombi - still growing
89 T3 Kombi - parts car
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 20th, 2015 at 12:31 PM |
|
|
| Quote: | Originally
posted by baghall
| Quote: | Originally
posted by psimitar
Do you mean when you put the box into 1st the light comes on briefly?
|
It stays on in both reverse and 1st until I take it out of gear.
|
OK, so IIRC the switch has a spring loaded plunger that when in the detent for reverse on the hockey stick makes the switch earth as the plunger is
fully extended. So If it's fully extended then it needs to screw further into the gearbox. If I haven't remembered corectly then it'll be the other
way around and it needs washers to space it further from the gearbox. 
madness is in the eye of the beholder |
|
|
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
|
| posted on September 20th, 2015 at 01:35 PM |
|
|
yeah try another washer and see how it goes.
[size=5] Calling all NSW Mid North Coast Veedubbers
Click Below [/size]
[size=6]Mid North
Coast VW [/size] |
|
|
