| [ Total Views: 1154 | Total Replies: 11 | Thread Id: 110795 ] |
|
|
 Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on April 5th, 2016 at 04:38 PM |
|
|
Recommendations for complete seperate Accelerator pedal/cable system
Hi all,
For years I have had issues with my 1961 Beetle accelerator pedal system. The thin rod that goes through pedal cluster bends due to extra load of
twin carbs etc. And Yes, I had it gusseted to try and strengthen it and it still bends.
I would like to know what complete separate pedal and cable systems people have used and if they were any good. Please remember this is not for a
race car so I want something that still looks pleasing to the eye and doesn't have some huge cable sitting inches above the carpet.
Thanks, Kev
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on April 5th, 2016 at 04:53 PM |
|
|
Can you fit a later pedal set, they don't bend, well I haven't bent one yet, maybe you need more boost so that you don't need to floor it as
much.
I run a Morse cable in my car through a dedicated 1/2 stainless tube
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on April 6th, 2016 at 11:55 AM |
|
|
| Quote: | Originally
posted by 1303Steve
Can you fit a later pedal set, they don't bend
|
Thanks Steve,
Firstly, I don't know if they go straight in. Also my pedals are all chromed so would like to keep them 
Kev
|
|
|
splitbus
Seriously Crusin Dubber
Posts: 162
Threads: 12
Registered: January 22nd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 6th, 2016 at 07:11 PM |
|
|
Found this
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Cheers, Mike
------------------------------------
| o*/o | 55 split screen
I don't have a bucket list, I have a f^%k it list a mile long
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on April 6th, 2016 at 07:15 PM |
|
|
Maybe someone can confirm if a late cluster will fit, if it does get it chromed, you know what they say" if it don't go chrome it or chrome wont get
you home
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on April 7th, 2016 at 01:29 PM |
|
|
| Quote: | Originally
posted by splitbus
Found this
|
Thank you for the idea, good chance may be my best option.
Cheers, Kev
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on April 7th, 2016 at 03:27 PM |
|
|
Kev, I had a similar support [in No.8 Beetle] on the stock arm, to stop flexing. If you make it with a separate clamp [like a con-rod], the stock arm
can stay as is.
Mine had the stock pedal, but I replaced the crummy link with a pair of 6mm rod ends joined up. The floor under the pedal can be plated also. The
cable should be OK. Make sure there is a means of limiting the travel AT THE PEDAL, so there is no strain on the cable etc. when you have your big
foot planted. 
If I still had the car I would post a photo. 
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on April 7th, 2016 at 09:40 PM |
|
|
I made this using a pedal assembly from a Toyota Hiace, with a bit of fabrication it turned into this, The cable runs under fuel tank and back through
the lower bulk head on the pan in line with the original tube in the tunnel, no springs are used at the pedal end and light one's on the carbs, it
allows you to heel and toe and has greater travel than the original resalting in a better feel. I made the cable and carry a spare in the car, it has
done many miles and is still the first cable.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on April 9th, 2016 at 10:50 AM |
|
|
| Quote: | Originally
posted by vwo60
I made this using a pedal assembly from a Toyota Hiace, with a bit of fabrication it turned into this, The cable runs under fuel tank and back through
the lower bulk head on the pan in line with the original tube in the tunnel, no springs are used at the pedal end and light one's on the carbs, it
allows you to heel and toe and has greater travel than the original resalting in a better feel. I made the cable and carry a spare in the car, it has
done many miles and is still the first cable.
|
That is more along the lines of what I was thinking.
Thanks, Kev
|
|
|
coletrickle
Wolfsburg Wizard
Posts: 661
Threads: 34
Registered: April 22nd, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 9th, 2016 at 07:03 PM |
|
|
How's the heel toe with that set up? Doesn't look very comfortable.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on April 9th, 2016 at 08:29 PM |
|
|
I have no issues with the heal and toe and have driven the car over long distance and the position is comfortable for me, set it up to suit yourself
like I have.
|
|
|
adlbeetle66
A.k.a.: Denver
Custom Title Time!
Under the car.........again!
Posts: 1476
Threads: 98
Registered: August 15th, 2014
Member Is Offline
Location: Capalaba, Brisbane, QLD
Theme: UltimaBB Streamlined2
Mood: ICH BIN VW NUSS
|
| posted on April 18th, 2016 at 06:23 PM |
|
|
Check this out Kev:
http://www.thesamba.com/vw/classifieds/detail.php?id=1384285
|
|
|
