| [ Total Views: 896 | Total Replies: 3 | Thread Id: 112104 ] |
|
|
 REDKG
Officially Full-On Dubber
Posts: 327
Threads: 76
Registered: August 29th, 2002
Member Is Offline
Location: sutherland-sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 3rd, 2017 at 05:10 PM |
|
|
1.1:1 ratio rockers on 1200cc
I want to fit 1.1:1 ratio rockers from a 1600 onto a 1200 (1385cc) engine. Will they bolt straight on ? Anything to be aware of ? Pushrod length o.k ?
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 3rd, 2017 at 05:36 PM |
|
|
Should be fine. They were fitted to later model 1200 but I'm unsure the year the swap happened. If you already have the 1600 rockers then hold one
against the 1200 rocker and you'll be able to see the difference. IIRC the pushrod side will be shorter length to the rocker shaft for the 1.1
rocker.
madness is in the eye of the beholder  |
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 4th, 2017 at 02:16 PM |
|
|
Brian I have had them on my 65 1200 engine since I build it
they work great no problems fitting or using a little more eumph
just make sure you have the later style rocker studs not the old type that pull out easy they go into the combustion head area and are about 4
inch long you can see them easy on the under side of the head
|
|
|
REDKG
Officially Full-On Dubber
Posts: 327
Threads: 76
Registered: August 29th, 2002
Member Is Offline
Location: sutherland-sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 4th, 2017 at 05:20 PM |
|
|
Thanks . One head has old style studs, have been planning to get Boris to modify. Will fit later rockers then.
|
|
|
