Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1199 | Total Replies: 4 | Thread Id: 112654 ]
Author: Subject:  Wasser box eng locks up but starts up again soon
Memberbratjie
Learner Dubber
*


No Avatar


Posts: 4
Threads: 2
Registered: August 10th, 2011
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on July 27th, 2017 at 10:01 PM
Wasser box eng locks up but starts up again soon


Hi guy's, need some advice please, I have rebuilt a few wbx engines before and even run a 2.1 Turbo in my beetle. I have overhauled a 2.1 standard sizes on case crank & sleeves. When the case came together the crank turned freely by hand. I installed the engine and ran it for half an hour at idle. Then started revving up slightly to check for smoke, knocks, etc,etc and the engine locked up. however after 30 sec's the engine turns freely and will start first time and idles perfect. I reopened and saw that the centre main bearing caps have worked a little harder than the rest but nothing out of the ordinary, cleaned all up, polished the crank, fitted new mains. Now it will idle up to half an hour with 80deg normal, .5 bar oil press at operating temp. still does the same, locks up after half our. If I keep revs at 2300rpm it will lock up up after a minute. 1 minute later it will start up first click and runs like nothing ever happened but half an hour later, same thing. Using 20 W 40 Castrol as in all other builds. anybody had an experience like this before? Also running 1.9 carb on customers request. Please help!
Super ModeratorBizarre
Super Moderator
The artist formerly known as blue74l
*******

Rank Avatar

Avatar


Posts: 12646
Threads: 725
Registered: August 25th, 2002
Member Is Offline

Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on July 28th, 2017 at 10:02 AM



mmmm............... might be woth asking the question here

http://forums.kombiclub.com/forums/t3-t4-tech-help-clinic.68/ 

A few more T3 techies there




Futue te ipsum!!!
Memberbushed
Bishop of Volkswagenism
******


No Avatar


Posts: 3482
Threads: 61
Registered: December 18th, 2006
Member Is Offline

Location: Lowood Qld
Theme: UltimaBB Pro Blue ( Default )

posted on July 28th, 2017 at 01:00 PM



Something else is tight in the set up
had 36hp mtr lock up when hot due to 1 pushrod guide being too tight. after refurb....just 1 ...ground it down and bingo!
Sorry not fam with the Wassers.




want any vw bits old but like me, Made in Germany!!!
Memberkombiwhisperer
Seriously Crusin Dubber
**


No Avatar


Posts: 119
Threads: 56
Registered: May 24th, 2012
Member Is Offline

Location: tiaro queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: daily changing

posted on August 4th, 2017 at 06:23 PM



Maybe you being cheeky with endfloat, what you set at??
Membergrumble
Son of Jim - Creator of Good
******


Avatar


Posts: 2604
Threads: 50
Registered: June 10th, 2008
Member Is Offline

Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time

posted on August 4th, 2017 at 08:42 PM



..Kombi whisperer amy be on the money particularly as it frees when it cools, the crank isn't showing seizure marks.


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 23.4% - SQL: 76.6% ]