| [ Total Views: 1082 | Total Replies: 6 | Thread Id: 112812 ] |
|
|
 hulbyw
Insano Dub Head
Posts: 795
Threads: 130
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 23rd, 2017 at 07:17 PM |
|
|
Throttle Cable with 40DCN
Maybe I am nuts but I am wanting to set up a 40DCN on my 1776. Problem is, that the accelerator cable exits the fan shroud behind the vertical runner
of the inlet manifold. The only options I can come up with are (a) to mount some small cable pulleys between the manifold and the fan housing to
redirect the cable either to the left of the manifold or to the right so that the cable passes through the middle of the manifold verticals or (b) cut
and shut the manifold to move it to the left so the cable passes straight through the gap between the verticals. This option has the disadvantage of
making the inlet manifold even more offset so the runners are even more unequal.
Any suggestions (no matter how out there) will be appreciated.
Cheers..........Wayne
|
|
|
modnrod
Fahrvergnugen
Posts: 978
Threads: 50
Registered: March 17th, 2011
Member Is Offline
Location: Midwest, Westoz.
Theme: UltimaBB Pro Blue
Mood: Old School Volksies!
|
| posted on September 26th, 2017 at 09:20 PM |
|
|
Drill the fanhousing an inch to the left for the repositioned throttle tube?
I wouldn't worry too much about the unequal length thing, perhaps reconsider that option.
Cable pulley mounted right on fanhousing outlet to redirect the cable up/left/right/somewhere before connecting with a linkage?
As above, but directed upwards to a linkage that operates OVER the top of the fanhousing.
DCNs work better than they should really, might be worth a go for something different.
|
|
|
hulbyw
Insano Dub Head
Posts: 795
Threads: 130
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 27th, 2017 at 09:57 AM |
|
|
Thanks for the suggestions. Drilling the fan housing was my first thought but unfortunately the cooler in the doghouse is in the way. Not really much
room to move it the other way either because of the fan. Cut and shut will give the smoothest path for the cable (exactly the same as stock) so may be
the best way.
Cheers
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8621
Threads: 556
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on September 28th, 2017 at 08:18 AM |
|
|
you can get nice small pulliies from a ship chandler then just run a longer cable to go around the pulley
|
|
|
hulbyw
Insano Dub Head
Posts: 795
Threads: 130
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 28th, 2017 at 11:06 AM |
|
|
Thanks Steve. I am wondering though whether the cable will run smooth.Guess it would be worth a try as it would be easier than cutting and re welding
the manifold as there is a heat riser welded to the manifold that will also need to be cut off and re welded in it's new position.
I will go into Whitworths and check out their pulleys. I have also found that there is an aftermarket twin pulley set up to route the accelerator
cable away from the gearbox on a split window bus that could likely be adapted to my Beetle
Cheers
|
|
|
 barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9462
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on September 28th, 2017 at 02:59 PM |
|
|
this is what your after
https://www.limebug.com/product/view/2128/sync-link-throttle-linkage-ida-idf-...
http://shoptalkforums.com/viewtopic.php?t=109159&start=195
|
|
|
hulbyw
Insano Dub Head
Posts: 795
Threads: 130
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 28th, 2017 at 06:20 PM |
|
|
Thanks barls! Might be what I need and want but not what I am willing to pay for! Looks the biz for twin carbs but reckon I would have a heap of parts
left over with a single weber.
It has got me thinking though.
Cheers.......Wayne
|
|
|
