Board Logo
Go To Bottom

Printable Version  
[ Total Views: 883 | Total Replies: 4 | Thread Id: 113903 ]
Author: Subject:  Seam Sealer Around Inside of Fuel Inlet 1968 Beetle
Memberhulbyw
Insano Dub Head
****


No Avatar


Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?

posted on February 2nd, 2021 at 02:32 PM
Seam Sealer Around Inside of Fuel Inlet 1968 Beetle


After some advice from restorers. Inside the luggage compartment, I have removed the seam sealer where the fuel inlet meets the front quarter panel as there was rust under the sealer. I have wire brushed and treated the rust. The seam sealer VW applied seemed to trap water that leaked through the seam from around the fuel flap area. Question is should I replace the seam sealer?
Cheers
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on February 3rd, 2021 at 07:33 AM



hulbyvw

I would use Stop Check which comes in a tube form and not as messy as the spray on goo that VW used

It can be squirted into the gaps between the two metal surfaces then wipe off excess with Prepsol much neater job before spraying the vehicle




Memberhulbyw
Insano Dub Head
****


No Avatar


Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?

posted on February 3rd, 2021 at 08:59 AM



Thanks! But when I Google Stop Check seam sealer, I don't get any good results.
Does it have another name?
Cheers....Wayne
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on February 3rd, 2021 at 06:34 PM



Wayne

let me check its Drip Check found on Ebay might be at Supercheap make sure you squirt into the cavity wipe of excess with prepsol to make a clean seal joint will stop moisture getting in between the 2 panels much neater than the spray on gunk

https://www.ebay.com.au/itm/3M-HEAVY-DRIP-CHEK-SEALER-8531-/251461151974 




Memberhulbyw
Insano Dub Head
****


No Avatar


Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?

posted on February 3rd, 2021 at 09:13 PM



Great. Thanks again


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 12.9% - SQL: 87.1% ]