Board Logo
Go To Bottom

Printable Version  
[ Total Views: 827 | Total Replies: 8 | Thread Id: 114004 ]
Author: Subject:  71 Super IRS with very squeaky rear rhs suspension
Memberpaslow22
Seriously Crusin Dubber
**


No Avatar


Posts: 109
Threads: 54
Registered: October 10th, 2015
Member Is Offline

Location: Lake Cathie NSW
Theme: UltimaBB Pro Blue ( Default )

posted on September 2nd, 2021 at 06:01 PM
71 Super IRS with very squeaky rear rhs suspension


Hi,

Need expert advice,
71 Super with IRS and it has a very bad squeak. It's driving me crazy.
I think I saw some time ago to use talc powder on the rubbers or grease?
What is the best remedy, it's only on the drivers side, at the moment.
Thanks
Darryl
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on September 2nd, 2021 at 06:20 PM



Rubber grease is best but you will have to pull apart to insert grease

most probably the rubber is worn needs replacing

you can prob get away with removing the end cover n fitting new rubbers with grease




Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on September 2nd, 2021 at 06:22 PM



Have you stood on the rear bumper n bounced it around to check noise

Oh an do both sides same time




Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on September 3rd, 2021 at 10:34 AM



Try a silicone spray on the bushes, it has always worked for me, jack the car up on stands and unload the bushes, it can do no harm and will work without dismantling the suspension.
Memberpaslow22
Seriously Crusin Dubber
**


No Avatar


Posts: 109
Threads: 54
Registered: October 10th, 2015
Member Is Offline

Location: Lake Cathie NSW
Theme: UltimaBB Pro Blue ( Default )

posted on September 3rd, 2021 at 04:52 PM



Quote:
Originally posted by vw54
Rubber grease is best but you will have to pull apart to insert grease

most probably the rubber is worn needs replacing

you can prob get away with removing the end cover n fitting new rubbers with grease


I replaced the both side rubbers with poly ones and didn't grease them over 2 years ago, car has only 18,000 klms after full rebuild, only drivers side squeaks ,
I'll pull it apart and apply rubber grease.

Thanks for the information,
Darryl
Memberpaslow22
Seriously Crusin Dubber
**


No Avatar


Posts: 109
Threads: 54
Registered: October 10th, 2015
Member Is Offline

Location: Lake Cathie NSW
Theme: UltimaBB Pro Blue ( Default )

posted on September 3rd, 2021 at 04:56 PM



Quote:
Originally posted by vw54
Have you stood on the rear bumper n bounced it around to check noise

Oh an do both sides same time


When checking the squeak at first thought it was from the front, but on checking found it to be the rear drivers side, passenger side is ok at the moment.
Thanks for the input
Memberpaslow22
Seriously Crusin Dubber
**


No Avatar


Posts: 109
Threads: 54
Registered: October 10th, 2015
Member Is Offline

Location: Lake Cathie NSW
Theme: UltimaBB Pro Blue ( Default )

posted on September 3rd, 2021 at 05:02 PM



Quote:
Originally posted by vwo60
Try a silicone spray on the bushes, it has always worked for me, jack the car up on stands and unload the bushes, it can do no harm and will work without dismantling the suspension.


I tried that and it didn't work, what I did find was that the end cover over the suspension torsion bar is not in the centre of the cover plate and I cannot put a feeler gauge between it and the cover plate. so something is amiss,
I wont know until I full it apart.
Thanks for the help.
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on September 3rd, 2021 at 07:25 PM



Polly always squeak load with lubricating grease

also when u pull arms n covers off de dag then remove any weld slag or splatter
make them smooth n they will work even better




Memberpaslow22
Seriously Crusin Dubber
**


No Avatar


Posts: 109
Threads: 54
Registered: October 10th, 2015
Member Is Offline

Location: Lake Cathie NSW
Theme: UltimaBB Pro Blue ( Default )

posted on September 4th, 2021 at 11:11 AM



Quote:
Originally posted by vw54
Polly always squeak load with lubricating grease

also when u pull arms n covers off de dag then remove any weld slag or splatter
make them smooth n they will work even better


OK I'll do that, and Thanks


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 3.2% - SQL: 96.8% ]