| [ Total Views: 1485 | Total Replies: 4 | Thread Id: 114065 ] |
|
|
 hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on January 25th, 2022 at 06:41 PM |
|
|
1968 Beetle Heater Connectors Asbestos?
Hi folks
The ribbed connectors that connect the heater boxes to the bakelite tubes which then connect with the steel heater tubes that go through the body
appear to have asbestos around the connecting flanges at each end. Anyone else with a '68 noticed that? And if so what did you do?
If I am right I have a challenge as the heater tubes available new are way too long.
Cheers.......Wayne
|
|
|
viiking
Officially Full-On Dubber
Posts: 253
Threads: 58
Registered: May 21st, 2012
Member Is Offline
Location: North West Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 26th, 2022 at 07:26 AM |
|
|
I believe that the cuffs indeed are asbestos. I haven't yet got to this point of reassembly of my 68.
Here's what the SAMBA says about the solution.
"I would recommend replacing the asbestos with silicone cuffs from an aircooled Vanagon because they seal better and are better for your health."
http://www.ratwell.com/technical/Heating.html
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on January 26th, 2022 at 12:17 PM |
|
|
I just left them.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 26th, 2022 at 03:57 PM |
|
|
out
|
|
|
hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on January 26th, 2022 at 04:41 PM |
|
|
Thanks guys. Not a big fan of asbestos so leaving them in is not an option for me.
Silicon Vanagon ones would be great but I would need 4 so finding good used is also likely not going to happen. Guess that leaves me with p/n 111 819
945. I will email WCM and ask for dimensions. Another possibility is replacing the asbestos with some silicone gaskets cut from a muffin tray and re
using the steel ring that holds the asbestos in place.
Cheers
|
|
|
