Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol Gearbox mods Go To Bottom

Printable Version  
[ Total Views: 660 | Total Replies: 0 | Thread Id: 114155 ]
« View Previous Thread View Next Thread »
Author: Subject:  Gearbox mods
MemberWhitty
Seriously Crusin Dubber
**

Avatar


Posts: 125
Threads: 28
Registered: September 29th, 2003
Member Is Offline

Location: Gladstone,Central Qld
Theme: XMBX Pro Green
Mood: so happy I could shit

posted on July 1st, 2023 at 05:19 PM
Gearbox mods

Team, recently pulled a gearbox to replace my noisy one. On disassembly found that gears one two and three have had teeth taken off at various spots on the synchros. First gear had ten teeth, five knocked off, ten good teeth, five knocked off. Second had three missing at both sides. These have obviously been taken off by hand, not mechanically, although there is evidence of grinding. Is there any old school reason for doing this? Selector hook had been welded as well. Box was in particularly good condition regarding bearings and cleanliness etc so don't know what to make of it. Hope someone may be able to help.


 Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol Gearbox mods   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.2% - SQL: 98.8% ]