| [ Total Views: 1324 | Total Replies: 8 | Thread Id: 16048 ] |
|
|
 kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 23rd, 2003 at 09:38 AM |
|
|
rust under windscreen rubber
whats the best way to fix rust under the front windscreen rubber in the channel?? cutting out patches looks rather hard in this area?? i reacon if i
tried to fill it with weld it would just blow out?!? i might try braise welding not sure??
any advice?
cheers
rhys
p.s. should i have it professionally done?
it aint just cool its aircool'd
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on November 23rd, 2003 at 04:22 PM |
|
|
Rhys
Make sure you cut the windscreen rubber when removing the screen to get at the rust otherwise you will be up for a new screen as well.
You need to cut and weld in patches but be carefull of the wiring under the dash when welding.
|
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 23rd, 2003 at 04:57 PM |
|
|
dave then windscreen is out didnt brake a thing!!! im gonna pull out the dash anyway so i will do it then!!!
ummmm know i need a safety glass windscreen!!! anyone wanna swap for an original kombi windscreen?
cheers
rhys
it aint just cool its aircool'd
|
|
|
 68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on November 23rd, 2003 at 05:22 PM |
|
|
Fish oiling under rubbers - Brazing up holes
I had 3 small holes under my rear window rubber, My Son Brazed them up for Me. Did a good job too.. The brazing equiptment was from where He was
working at the time.... So brazing is OK under windscreens etc, or for small rust repairs, but no good elsewhere as it has no strength.... Maybe
someone from the forum could weld the holes up for You.
Before replacing the front & rear screens I painted the whole area where the rubber sits with a few coats of Fish Oil, so it cannot happen
again... I have blocked up the drain holes under the rubbers with the fish oil. Fish oil cannot rust.. Make sure You use a good brand like motorpro
or power plus or Killrust.
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on November 23rd, 2003 at 05:30 PM |
|
|
Safety Glass dangerous & illegal...
Why did You say You needed a Safety Glass windscreen??
They are illegal, unless You cannot find a replacement, and just plain dangerous....
All those small slithers of glass going all over You... they were terrible things...
They were only meant to be used before seat belts were in use, as people (including Myself) were hurled thru the windscreen in a car accident.... but
driving along and a stone is thrown up from a car going the opposite direction - and POW - firstly You cannot see thru the shattered glass... VERY
dangerous- and if You are doing about 80-100kmh, a few seconds later.. ALL the windscreen will be blown over the occupants of the Car....
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
his@hervw
Casual Dubber
Posts: 49
Threads: 8
Registered: April 3rd, 2003
Member Is Offline
Location: Stanthorpe
Theme: UltimaBB Pro Blue ( Default )
Mood: mellow
|
| posted on November 23rd, 2003 at 06:43 PM |
|
|
I have the same prob, you weld up the rust holes with new patches, make it nice and smooth put on rust treatment, paint it , window screen in. Is
there a way to get at the inside of the weld joins to stop them rusting out again in six months I haven't heard about???
Never Rushed
|
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 23rd, 2003 at 07:08 PM |
|
|
sorry i mean the new style glass i cant think of the name i need it cause im puttin a V6 in and its a necessity!!
so brazing will be ok??i probably just cut patches and wled them in do it properly this time while eveything's out
cheers
rhys
it aint just cool its aircool'd
|
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 23rd, 2003 at 07:12 PM |
|
|
its states "Automotive Safety Glass windscreen must be fitted"
cheers
rhys
it aint just cool its aircool'd
|
|
|
REDKG
Officially Full-On Dubber
Posts: 327
Threads: 76
Registered: August 29th, 2002
Member Is Offline
Location: sutherland-sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2003 at 12:41 PM |
|
|
clean the holes out good and braze, try not to put in too much heat, distortion, otherwise solder for small holes but clean off all flux.
|
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
| posted on November 24th, 2003 at 01:06 PM |
|
|
On the glass, original glass was Hardened glass, new windscreens are Laminated glass.
Hardened glass is actually stronger and more scratch resistant than Laminated glass.
The difference is when Hardened glass breaks it completely shatters, and either stays there blocking your vision or covers you with glass slivers.
Laminated glass, even though it breaks easier, it either gets a large split in it, or gets the little stars you often see. It doesn’t shatter or
fall in your lap like Hardened glass does, so much safer.
:thumb
|
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2003 at 02:40 PM |
|
|
thanks for the info on glass andy helps me understand why!!!
cheers
rhys
it aint just cool its aircool'd
|
|
|
