| [ Total Views: 1177 | Total Replies: 4 | Thread Id: 16946 ] |
|
|
 11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
 posted on December 23rd, 2003 at 08:59 AM |
|
|
VDO Oil pressure sender unit
Has anyone else had problems with the VDO oil pressure sender units?
The reason I ask is that I have a 2L kombi motor that is about 2years since a rebuild, & the oil pressure has been dwindling for a while now it
got to the point where I'd go for a short drive and the pressure would read less than 20psi @ 3000rpm and 0psi at idle......so I replaced the oil
pump in a vain attempt to save the motor.....when I started it up it was showing 14psi at idle and wouldnt increase with revs...........so I stuck a
non electric guage on and found it really had 40psi at idle and went up to 60psi when you revved it...........
To say I'm pissed is an understatement.....I've run VDO gauges for years now with no probs.......now I'll never know if what the gauge
says its whats really happening.........
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
Tazz
A.k.a.: Tazz Devil
Custom Title Time!
Old Skool
Posts: 1315
Threads: 109
Registered: August 26th, 2002
Member Is Offline
Location: QLD
Theme: UltimaBB Pro Black
Mood: facisious
|
| posted on December 23rd, 2003 at 10:00 AM |
|
|
A common problem with eletric senders.
You will get a little amount of Gunk i the sender from Crap oil. (All NON syn oils have gunk) You can try washing it in petrol and giving ait a little
blast with Air.
Not to much... you will kill it.
Its probly a good idea to pull them off and give em i clean when you do an oil change.
Tazz
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
|
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on December 23rd, 2003 at 10:04 AM |
|
|
Well that is strange, I've never had any problems before, and with the oil leaks the motor has had its been getting a constant oil
change........:o
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on December 23rd, 2003 at 03:43 PM |
|
|
is the sender unit the same "range" as the guage ?
|
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on December 23rd, 2003 at 11:55 PM |
|
|
yep
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
| posted on December 24th, 2003 at 12:04 AM |
|
|
I've only ever had the one in Andy, which seems fine, so can't help there.
To ease your mind though, you can rely on the pressure switch as a backup. They kick in ~4-6psi from memory. If things are going amiss causing low oil
pressure for any reason (heat, worn bearings, bad pump, bad relief etc) the pressure switch will come on at idle.
Cheers,
Andy :thumb
|
|
|
bajaman64
Casual Dubber
Posts: 45
Threads: 10
Registered: January 27th, 2003
Member Is Offline
Location: Vic, Altered State
Theme: UltimaBB Pro Blue ( Default )
Mood: Bent n Twisted
|
| posted on December 24th, 2003 at 12:40 AM |
|
|
Every second day at work i sell an electric sender unit for oil pressure. They do not last forever.Nothing does.This includes the guage. Vibration,
heat and as stated earlier, crap build up from mineral oil, all lead to a dud sender.
You should also check the wiring. A poor connection is all it takes. If the full signal cant get through, you cant get a proper feed to the gauge. Try
mounting the sender vertically so that the oil drips back into the engine when stoped and not siting in the sender itself. This is when sludge
forms.
Hope this helps Todd :jesus
You may be pissed at having replaced the oil pump, but you should also be glad that the engine is AOK. Look at the brite side. It is a learning
experience and you know next time. You now have a spare pump.
Keep om truckin.... Todd
|
|
|
