| [ Total Views: 449 | Total Replies: 1 | Thread Id: 17760 ] |
|
|
 Quoll
Officially Full-On Dubber
Posts: 232
Threads: 38
Registered: January 9th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 14th, 2004 at 09:34 PM |
|
|
Pedal throw distance
G’day,
I was wondering if it’s possible to adjust the position of the clutch and break pedal as I am tall and it’s fairly uncomfortable to operate the
clutch pedal in its present position any suggestions?
I've attached I diagram showing what I want to do.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 15th, 2004 at 07:30 AM |
|
|
What year model car is it,
The early pre 67 will have to be heated up to bend them as there a cast pedal
The later pedals are usuall pressed steel and can probally be bent using a lever.
both pedals should be that same distance or level together at the rubber pads. this is adjustable on the floor.
|
|
|
Quoll
Officially Full-On Dubber
Posts: 232
Threads: 38
Registered: January 9th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 15th, 2004 at 09:05 PM |
|
|
| Quote: |
both pedals should be that same distance or level together at the rubber pads. this is adjustable on the floor.
|
How would I go about doing that
Thanks,
Justin. |
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 15th, 2004 at 09:54 PM |
|
|
Pull the floor mats up and below the brake n clutch pedals on the floor you will see 2 x 13mm headed bolts
these are loosened and the pedals can be mooved or levered into position and the bolts re tightened
theres no pressure on the brake pedal so its a good idea to back of the clutch pedal adjustment at the gearbox end so you can moove the clutch pedal
more easier.
Then re tighten every thing
|
|
|
