Board Logo
Go To Bottom

Printable Version  
[ Total Views: 589 | Total Replies: 1 | Thread Id: 27370 ]
Author: Subject: water inside bug!
MemberCanni.
Wolfsburg Wizard
***


No Avatar


Posts: 471
Threads: 29
Registered: September 21st, 2003
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )

posted on August 15th, 2004 at 04:06 PM
water inside bug!


I have a problem with water getting inside the bug (in door pillar near the drivers door...) I've added a picture...the water is inside that bottom hole there... (black grommet covereing hole has been missing since I bought the car) I also noticed chunks of rust forming inside as I was soaking up some of the water :S I had some severe rust fixed up there last December and it hasn't filled up with water again until today (has been raining pretty heavily)

I can't figure out where the water is coming from....nor how to stop it... any ideas? I've temporarily covered the hole up with tape (until i can buy a black grommet thing) also any suggestions for a rust preventative to spray down there when I've figured out where the water is coming from?

Thanks,
Karly.

[Edited on 15-8-04 by Canni.]

[Edited on 15-8-04 by Canni.]

Error
Sorry, you must be a registered user in order to download attachments.




Heidi - 1960 White Beetle
'65 Kiwi Ghia
Super Administratorbarls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
*********

Rank Avatar

No Avatar


Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline

Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices

posted on August 15th, 2004 at 04:13 PM


use fish oil

[Edited on 15-8-2004 by barls]




“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me

http://www.goats.com/store/images/banner_destroy.png
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on August 15th, 2004 at 04:29 PM


Hi Karly,
The water is coming from under the windscreen rubber...
there are 3 holes at both corners of the windscreen at the bottom for water to go if the rubber leaks...

To Use fish oil, You will have to wait until its completly dry...
Then buy a pressure pack can of deodorised Fish Oil at Big W or auto one etc... Don't buy any fish oil under $5 a can like export brand... it doesn't work...
Put the small plastic hose into the nozzle at the top of the can, and push the nozzle under the windscreen rubber up towards the top of the windscreen... the Fish oil will run down under the rubber and down thru the holes in behind the door hinges.... When its dry, You can help with a hair dryer pointed down behind the hinges from under the bonnet... I would repeat the operation a few times to make sure the fish oil spreads everywhere to stop the rust... It doesn't matter if the fish oil drips out the bottom...
At least You know its getting there....
Repeat again in the summer a few times... with the HOT temps.. the fish oil dries faster....

I would also spray into the hinge screw holes too....
You can take those plugs out with a small screw driver...
and New ones - clear or black are available....

Lee




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
MemberCanni.
Wolfsburg Wizard
***


No Avatar


Posts: 471
Threads: 29
Registered: September 21st, 2003
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )

posted on August 15th, 2004 at 04:33 PM


thanks very much Lee will definately do that...



Heidi - 1960 White Beetle
'65 Kiwi Ghia


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 15.1% - SQL: 84.9% ]