Board Logo
Go To Bottom

Forum Rules
New guidelines are in place as of 15/1/2014. Please review here:

http://forums.aussieveedubbers.com/viewtopic.php?tid=104733 

Printable Version  
[ Total Views: 607 | Total Replies: -2 | Thread Id: 30266 ]
Author: Subject: FS: Work 18 inch rims (Vic)
Memberfudboy
Learner Dubber
*


No Avatar


Posts: 3
Threads: 3
Registered: October 19th, 2004
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )

posted on October 19th, 2004 at 11:40 AM
FS: Work 18 inch rims (Vic)


Contact:
Tim - bh: (03) 9359 8641
email: tkeiller@iprimus.com.au
Area: North Melbourne, Vic


Set of Work VS-SD 18x8 inch rims with Falken Ziex 225/40 R18 tyres.
These were on my VW New Beetle for 3 years.
Bolt pattern is 5x100, offset is 34mm. They come with a full set of
wheel bolts which are slightly longer than the standard new beetle
bolts, includes the anti-theft bolts too.

Look great on a New Beetle but will also fit on a late model Golf or Audi TT.

Rims are in good condition, but left hand front has some slight edge
damage ... and the left hand rear has very slight edge damage too.
Two of the tyres have plenty of tread left, but the other two are worn
on the outer edges. If you need to see some more detailed photo's just
email me and I'll send them through.
These rims cost me $4850 four years ago, but considering tyre wear and
the edge damage on two of the rims I'm asking for $1100 ... I'm open to
offers though.

I'm located in North Melbourne, so if you want to view the wheels in
person just send me an email or phone to arrange.



http://home.iprimus.com.au/tkeiller/vwsale/wheel1.JPG
http://home.iprimus.com.au/tkeiller/vwsale/wheel2.JPG
http://home.iprimus.com.au/tkeiller/vwsale/newbug.jpg


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 1.2% - SQL: 98.8% ]