Board Logo
Go To Bottom

Printable Version  
[ Total Views: 473 | Total Replies: 3 | Thread Id: 40598 ]
Author: Subject: Heater Cables
Member76camper
Fahrvergnugen
****


Avatar


Posts: 884
Threads: 89
Registered: January 13th, 2005
Member Is Offline

Location: sydney, northern beaches
Theme: UltimaBB Pro Blue
Mood: happy :-)

posted on June 15th, 2005 at 10:06 PM
Heater Cables


The outercasing of on of my heater cables is broken, so the whole thing moves instead of just the wire so. To get the cable to work i will need to replace the whole outer casing of the heater cable. Has anyone done this? Is it hard? Expensive?
Super Administratorhelbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
*********

Rank Avatar

Avatar


Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline

Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair

posted on June 15th, 2005 at 10:11 PM


If you mean the sheath that the inner cable moves in, it comes with the new cable. If it is the tube welded to the floor pan, it needs to be welded back in place.

I have replaced heatercables on both our old bus and the current one, both 75 models. I did it on a hoist both times as it is a bit of a bugger otherwise. The first one had a cable that was fully rusted/ seized/ full of dirt and I was lucky not to break it inside the tube. Yours is moving inside the tube I think, so it should come out ok.

I think I paid about $35 per cable about 4 years ago. 2 required to go to the back




MemberAndy
Son of Jim - Creator of Good
Andy's Adventures
******


Avatar


Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man

posted on June 16th, 2005 at 07:55 AM


Sounds possibly like the ends of the outer casing are not fixed in position properly. Each end needs to be fixed for it all to work.
:)
Member76camper
Fahrvergnugen
****


Avatar


Posts: 884
Threads: 89
Registered: January 13th, 2005
Member Is Offline

Location: sydney, northern beaches
Theme: UltimaBB Pro Blue
Mood: happy :-)

posted on June 16th, 2005 at 06:06 PM


Yea, the sheath is broken on one of the cables, but the others are really tired, just moving. So new heater cables come with the sheath and everything? Where should i go to get the cables and outer sheath?


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.9% - SQL: 98.1% ]