[ Total Views: 753 | Total Replies: 4 | Thread Id: 41940 ] |
|
72RSbug
Officially Full-On Dubber
Posts: 266
Threads: 49
Registered: January 4th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 20th, 2005 at 05:31 PM |
|
|
fuel lines
Do you guys use the stock fuel line when converting to an EJ20T suby or to a bigger one?
I have a high output electric fuel pump (rated for 500HP) and will try to hook it up soon.(my engine is an EJ20 TT)
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
posted on July 20th, 2005 at 05:52 PM |
|
|
I used 10mm ID from tank to pump and 8mm ID from pump to motor
|
|
ratbug
A.k.a.: Andrew Todd
Wolfsburg Wizard
aka toddy101
Posts: 439
Threads: 30
Registered: January 14th, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 20th, 2005 at 06:38 PM |
|
|
I used 5/16" bundy tube for the efi supply and return rails. Got it cut to length from the local brake place and they even barbed the ends for me.
The stock line I used for the vent line.
The surge tank to pump is somehting like 10-12mm flex hose.
|
|
72RSbug
Officially Full-On Dubber
Posts: 266
Threads: 49
Registered: January 4th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 20th, 2005 at 06:44 PM |
|
|
Ok, thanks. The stock fuel line runs through the middle of the chassis, correct? (don't have the bug at my place to go check) and the fuel lines on
the EJ20 are on the passenger side ?
|
|
ratbug
A.k.a.: Andrew Todd
Wolfsburg Wizard
aka toddy101
Posts: 439
Threads: 30
Registered: January 14th, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 21st, 2005 at 05:48 PM |
|
|
Yeah, the stock lines runs through the middle. I put the new lines through the middle as well and ran them with the stock line. My ej20 lines are on
the drivers side when the engine is in the back.
|
|