| [ Total Views: 2207 | Total Replies: 43 | Thread Id: 41998 ] |
| Pages: 1 2 |
|
|
 helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
| posted on July 21st, 2005 at 09:19 PM |
|
|
plans for your buggy/baja/off roader
what are your realistic short - medium term plans for yours. long term we could all say 18" travel, wrx motor and g50 trans, see you at finke/aus
safari.....
but what is actually likley...
when i stop punishing mine
i aim to rebuild it stronger and meaner than b4 (and hopefully take it round OZ).. nothing too serious, aircooled, reliability and self fix is the
basis.. home build 1835 or a bit more (1915) whatever; a single carby type 1, ajuster king and link pin front, dual link irs (irs) with ajuster and
2-3" body lift, reglassed & reinforced body, alli hard top, soft sides, twin batteruies, alternator, glassed in waeco spot, glassed in mapping GPS
spot wired in, uhf, ect, ect, maybe a solid roof rack to roll the swag out on outta the way of the creepy crawlers.. you get the idea.
haha
PS.. last couple of weekends after getting home from going for a fang, i've had ticks crawling around, sometimes hours later whilst watching TV!!.
spose you baja boys miss out on this bonus from buggies too.
(buggies cant go too deep for too long.. but i love how easy it was to get going again.. wait till i've made a crank handle.. nothing will stop
me..)
(no engine cover and too much tyre pressure)
that'll teach me for following 4wheel MC tracks)
:thumb
|
|
|
tinsfci
Commited Dubber
Posts: 68
Threads: 7
Registered: January 22nd, 2005
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 21st, 2005 at 11:52 PM |
|
|
I have had my buggy for 6 months and it has not even seen a gravel driveway! I will go bush when I am happy that it is reliable, until then it only
gets used in motorkhana. This is my first dub and I was on a pretty steep learning curve for a while. I still need to rebuild the link pins and
replace all the wheel bearings and fix the stalling problem (carb rebuild and heated manifold).
A decent roll bar and harnesses are on the to do list, as well as replacing the towel racks on the sides with decent nerf bars, and later on a decent
motor. Gotta love the simplicity of a type 1, I think I will build a 1916 or an oxyboxer in the next couple of years, and maybe megasquirt injection.
A few pics:
Gotta love the fun per dollar of buggys.nn[ Edited on 21-7-2005 by tinsfci ]
|
|
|
Sandy
Officially Full-On Dubber
Posts: 254
Threads: 14
Registered: April 19th, 2005
Member Is Offline
Location: Brisbane
Theme: XMBX Pro Green
Mood: hmmm
|
| posted on July 22nd, 2005 at 09:00 AM |
|
|
I plan to take out the back seat and put a platform in there so I've got plenty of space to put a spare, recovery equipment and some luggage.
Some more sound proofing would be nice too. Long term plans include swapping this body for an oval with a flash kit.
|
|
|
Anthiron
A.k.a.: Nicko McKay
Compulsive Aussie Vee Dubber
The Baja Rejuvenation Begins
Posts: 4936
Threads: 310
Registered: October 1st, 2003
Member Is Offline
Location: Buderim QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Hell hath no fury like a womans scorn for sega.
|
| posted on July 22nd, 2005 at 04:37 PM |
|
|
really short term: finish re doing interior, (finish sanding and painting, new door cards. rear platform and storage unit.) bash plates (front and
rear). adjustable coil over rear shocks. (already have some gotta get them out of another baja i have and into my driver) wide rear guards, paint
bullbar and engine cage white. repaint wheels white. UHF radio, Whip aeriel and orange dune flag, roofrack with removable spotties, need to pull down
my spare engine and rebuild top end to 1641. paint engine and tinware, twin kads thunderbird exhaust and whack that in the baja.
longer term: visit custom offroad for new offroad adjustable front beam, IRS with 1600 kombi box, raised rear, new wheel bearings, brake linings,
wheel cylinders and soft lines.
Nick
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
|
|
|
dubcab
Seriously Crusin Dubber
Posts: 175
Threads: 25
Registered: September 4th, 2002
Member Is Offline
Location: 30kms east Toowoomba
Theme: UltimaBB Pro Blue ( Default )
Mood: T2 tdi...100mph&40mpg?
|
| posted on July 22nd, 2005 at 07:53 PM |
|
|
Stage 1..2...3...
My 13 year old son(bajaboy) has been off-roading in the creek behind our house and having a ball. But after a couple of failed attempts at a 40deg
bank He,s keen as to get his 58' baja to "climb any mountain" .So Bajaboys pocketmoney for the next 4 years will be sunk into 'rocky' to make it
the most offroad capable baja in oz.Everything will be done in stages but we'll skip to stage 3. .........Bay kombi front and rear ends ,tied
together with chromoly rollcage and bracing. 2 litre box with short1st and2nd .Diff lock. Custom I.R.S.reduction box conversion.2275 single carb with
low boost variable nozzle turbo.16inch offroad rims with internal beadlocks. Little 33inch all-terrains for the street and sand. 35inch interco
boggers for bush play time. 3inch body lift kit . Twin adjustable rancho's per wheel. YEH YEH I KNOW this kid better go out and get a job. The
trouble is this kid has been watching the paris-dakar videos and reckons high speed long distance racing looks fun too.........might ditch the
reduction boxes and turn up the boost.....:alien
|
|
|
helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
| posted on July 22nd, 2005 at 09:49 PM |
|
|
woo hoo.
let him cut his teeth on the finke and the aus safari first so we can see, first hand, a 58 custom baja race. then let him sort ou the PD. haha
oh, and sandy bring on the mega off road oval, with the style and panache' of a flash kit. haha. excellent
:thumb
|
|
|
Desert Moose
A.k.a.: Chris Hill
Veteran Volks Folk
Cut Cut Cut
Posts: 2098
Threads: 175
Registered: March 4th, 2004
Member Is Offline
Location: Perth W.A.
Theme: UltimaBB Pro Black
Mood: I don't know if I'm indecisive
|
| posted on July 22nd, 2005 at 10:25 PM |
|
|
My new clone Manx body will be here Monday....
so my plan is to drive it.............lol
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 22nd, 2005 at 11:22 PM |
|
|
I got to see you behind the wheel of one of these Chris :P
Looking for that special lady : PM me for coffee & cake
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on July 23rd, 2005 at 02:58 PM |
|
|
Man what is it with all the 1915s? Go get yourself a cheap liberty and rape and pillige it. I cannot tell you how awesome my buggy was on the dunes
the other day. I love aircooled motors but at half the price and double the Kms subies looks soo much better. I'm not just stirring you guys up.
Seriously, see if you can score a drive of a 2.2l liberty and then imagine that motor in your car pushing half the weight with double the exhaust
note. nn[ Edited on 23-7-2005 by pete wood ]
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on July 23rd, 2005 at 02:59 PM |
|
|
BTW, my plan is to go up, as far as I can. Lot's more ground clearance and all my mechanicals stock as they are at the mo, shouldn't need anymore
power. Maybe some stiffer torsion bars in the rear too. And some wider tyres for the dunes of course...
|
|
|
Sandy
Officially Full-On Dubber
Posts: 254
Threads: 14
Registered: April 19th, 2005
Member Is Offline
Location: Brisbane
Theme: XMBX Pro Green
Mood: hmmm
|
| posted on July 23rd, 2005 at 05:22 PM |
|
|
| Quote: | Originally
posted by helterskelter400
oh, and sandy bring on the mega off road oval, with the style and panache' of a flash kit. haha. excellent
|
Yeh, black and with working semaphores. :thumb I'll give it a few years first though, gotta get some fun outta the one I got hey
|
|
|
billholmes
A.k.a.: Will Holmes
Officially Full-On Dubber
Dragging my 61' Baja and 62' Beast
Posts: 262
Threads: 25
Registered: February 11th, 2003
Member Is Offline
Location: Launceston Tasmania.
Theme: UltimaBB Pro Blue ( Default )
Mood: Dragging my 61' Baja and awesome 62'. Beach, Surf, 62' Beetle.
|
| posted on July 24th, 2005 at 08:19 PM |
|
|
My dad's building a herbie/baja and he is gonna cut up our old baja.
Luckly for $100 i have managed to buy it off my dad and will be putting my old 1200 motor in it. (if i dont put it in the bay panel van. Floorpans
stuffed but have got a spare floor
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
billholmes
A.k.a.: Will Holmes
Officially Full-On Dubber
Dragging my 61' Baja and 62' Beast
Posts: 262
Threads: 25
Registered: February 11th, 2003
Member Is Offline
Location: Launceston Tasmania.
Theme: UltimaBB Pro Blue ( Default )
Mood: Dragging my 61' Baja and awesome 62'. Beach, Surf, 62' Beetle.
|
| posted on July 24th, 2005 at 08:22 PM |
|
|
1960's Baja
1600 Donk
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
billholmes
A.k.a.: Will Holmes
Officially Full-On Dubber
Dragging my 61' Baja and 62' Beast
Posts: 262
Threads: 25
Registered: February 11th, 2003
Member Is Offline
Location: Launceston Tasmania.
Theme: UltimaBB Pro Blue ( Default )
Mood: Dragging my 61' Baja and awesome 62'. Beach, Surf, 62' Beetle.
|
| posted on July 24th, 2005 at 08:25 PM |
|
|
And the interoir
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Anthiron
A.k.a.: Nicko McKay
Compulsive Aussie Vee Dubber
The Baja Rejuvenation Begins
Posts: 4936
Threads: 310
Registered: October 1st, 2003
Member Is Offline
Location: Buderim QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Hell hath no fury like a womans scorn for sega.
|
| posted on July 24th, 2005 at 08:25 PM |
|
|
nice baja bill. i like that kit. i wish i could get my hands on one! my bug eye kit has the skinnyest guards on it. but it looks like ill be using a
wide eye kit with the bug eye nose cone. this will give me 2 sets of lights
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
|
|
|
billholmes
A.k.a.: Will Holmes
Officially Full-On Dubber
Dragging my 61' Baja and 62' Beast
Posts: 262
Threads: 25
Registered: February 11th, 2003
Member Is Offline
Location: Launceston Tasmania.
Theme: UltimaBB Pro Blue ( Default )
Mood: Dragging my 61' Baja and awesome 62'. Beach, Surf, 62' Beetle.
|
| posted on July 25th, 2005 at 09:13 PM |
|
|
Yeah well sadly rust has completly destroyed the pan/
Battery area has disappeared and a large piece of steel has
taken place of battery area. My dad's plan was to cut it up with
an oxy and setalen torch. BUT i said no and saved it for $100.
Have been given a floor of a 58 and want to save this little jem.
As it's been in the family as long as i have.(13 Years!) I also learnt
to drive in it. I have orginized with a couple of mates to rebuild
it on the weekends and rebuild it to Baja Specs.Today i have brought it back from our shack and me and my dad pulled the horn,radio,wiper motor,and
genreal stuff such as wiring,speedo cable etc.And put all of it on the 64 Herbie Baja. Sad to see the baja in such a bad state but a bunch of 13 year
old kids and a tonne of baja parts should work majic on "old fathful" Cheers Will.
|
|
|
billholmes
A.k.a.: Will Holmes
Officially Full-On Dubber
Dragging my 61' Baja and 62' Beast
Posts: 262
Threads: 25
Registered: February 11th, 2003
Member Is Offline
Location: Launceston Tasmania.
Theme: UltimaBB Pro Blue ( Default )
Mood: Dragging my 61' Baja and awesome 62'. Beach, Surf, 62' Beetle.
|
| posted on July 25th, 2005 at 09:14 PM |
|
|
Oh by the way i found the remainders of an oval beetle front end today sitting on the side of the road! Future oval project.......nn[ Edited on25-7-2005 by billholmes ]
|
|
|
Chewy
Fahrvergnugen
Posts: 889
Threads: 75
Registered: July 18th, 2004
Member Is Offline
Location: Geelong, Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Buggered
|
| posted on July 25th, 2005 at 11:12 PM |
|
|
My plan is to get the thing on the road!
.
|
|
|
WABaja
A.k.a.: Daniel
Insano Dub Head
Call ME when you need a TOW
Posts: 824
Threads: 40
Registered: November 25th, 2004
Member Is Offline
Location: Perth WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Grumpy in the morning and moody at night
|
| posted on July 26th, 2005 at 03:57 AM |
|
|
.
What could I Possibly want that isn't there already...????
Fill Tank, get in, turn key, DRIVE.....!!!!!
It's ALL been done baby, and I like it just the way it is....!!
.
I hate to admit it, but man, I think you're right....
|
|
|
bigbaja
Wolfsburg Wizard
Posts: 438
Threads: 23
Registered: February 22nd, 2004
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: sick of waiting
|
| posted on July 26th, 2005 at 02:04 PM |
|
|
a roof
[size=4] Terry - Custom Off RoadComponents[/size]
28 Hayward Street, Stafford QLD 4053
Ph: (07) 3356 4356 - Fax: (07) 3356 6765 |
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on July 26th, 2005 at 06:05 PM |
|
|
yeah, a roof
WAbaja, you've got plenty of height, but quite frankly too much height for me. Once you've higher than 4WD diff's you're usually high enough. Any
higher just makes the car unstable, get heaps of body roll and dangerous on side angles. Just my opinion, no offense :thumb
I still have to get my thing front end in. Not for more height, just to get some drop travel back. A thing front end is much plusher than a raised
stock front end.
And of course get my air-con in. I agree with Pete, don't bother wasting money on the VW motors, especially in something so un-original as a buggy /
baja. My V6 has been in for 2.5yrs now and it's been perfect.
I just get in and drive it. Get it dirty every now and again, and then just remember to clean it before the next show.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
WABaja
A.k.a.: Daniel
Insano Dub Head
Call ME when you need a TOW
Posts: 824
Threads: 40
Registered: November 25th, 2004
Member Is Offline
Location: Perth WA
Theme: UltimaBB Pro Blue ( Default )
Mood: Grumpy in the morning and moody at night
|
| posted on July 26th, 2005 at 10:25 PM |
|
|
I HAVE a roof thank you...
And you can't get too high in a Baja...
Anyone that says you can, is Jealous....
This car has been running like this for some time now, and I have No probles with stablility, conering,side angles or blah blah blah....
I hate to admit it, but man, I think you're right....
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on July 27th, 2005 at 10:42 AM |
|
|
I knew that post would start trouble People are welcome to believe what
I say or not.
Cars that are jacked up too high, or use suspension that is too stiff like kombi front and rear ends, do not have enough usuable suspensions travel
left for smooth offroading on articulated type surfaces.
The problem with being jacked up that high is there is very little drop travel left. This causes a wheel to be lifted very early on even ground. Trust
me I have watched and driven a lot of offroad vw's on this type of terrain.
And kombi front and rear ends are simply too stiff and lead to the same problem of lifting a front wheel early.
Sure you can get up anything with a bit of speed, but that doesn't prove vehicle ability. My brother can take his pulsar up alot of hills (in reverse
for more grip), but it's because he drives like a nutter, not because the car has any capability.
WABaja, I am not trying to offend you. You're baja is cool and the height looks impressive. But I think it's go just as many places if it was
2inches lower.nn[ Edited on 27-7-2005 by Baja Wes ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Sandy
Officially Full-On Dubber
Posts: 254
Threads: 14
Registered: April 19th, 2005
Member Is Offline
Location: Brisbane
Theme: XMBX Pro Green
Mood: hmmm
|
| posted on July 27th, 2005 at 03:53 PM |
|
|
Cool, off road pulsar.:thumb My wife's got one of those, I may take it out for a strap this weekend instead of the baja.
Travel is more important than lift, but if you can get both you're laughing. Since I put my long travel front end in even the roughest track is
smoooth.
You must be a busy fella Wes, you were talking about putting in that thing front end in ages ago, or are you just like me and sick of working on the
damn things
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on July 27th, 2005 at 04:20 PM |
|
|
yes I have been a busy fella. Mainly doing stuff with the house and putting the baja at the bottom of the list.
For the thing front end I just need some new ball joints from the US and I should be right. I've also been assisting in the new customoffroad caliper
brackets for thing front ends. They are drum brake only stock. The first set of brackets have been CNC machined and look great.
btw, you car has absolutely awesome front end travel. It is not too stiff like many quickly raised front ends. It has probably the best articulation /
travel at the front I have seen. And I'm sure you know it helps. I've attached some pics of sandy's car as it's front end works really well and
you can see the articulation it gets. It is as high as you really want or need to raise a baja.nn[ Edited on 27-7-2005 by Baja Wes ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 27th, 2005 at 06:25 PM |
|
|
my plan is to get one 
|
|
|
Desert Moose
A.k.a.: Chris Hill
Veteran Volks Folk
Cut Cut Cut
Posts: 2098
Threads: 175
Registered: March 4th, 2004
Member Is Offline
Location: Perth W.A.
Theme: UltimaBB Pro Black
Mood: I don't know if I'm indecisive
|
| posted on July 27th, 2005 at 06:59 PM |
|
|
| Quote: | Originally
posted by Buggy Brad
my plan is to get one
|
I know someone that can Help.........lol :P
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on July 30th, 2005 at 04:00 PM |
|
|
| Quote: | Originally
posted by Buggy Brad
my plan is to get one
|
Hoarding everyone elses in ya workshop isn't the right way. 
|
|
|
MickH
A.k.a.: Michael Hutchinson
Bishop of Volkswagenism
Hairy Gutted Sloth
Posts: 3389
Threads: 29
Registered: September 6th, 2003
Member Is Offline
Location: TownsvilleTropical North QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Grow a brain...walls don't hit back...
|
| posted on July 30th, 2005 at 08:39 PM |
|
|
| Quote: | Originally
posted by pete wood
| Quote: | Originally
posted by Buggy Brad
my plan is to get one
|
Hoarding everyone elses in ya workshop isn't the right way.
|
Here Here........
tssnq.com.au
|
|
|
last celtic warrior
A.k.a.: Steve Barnes
Wolfsburg Wizard
Posts: 402
Threads: 33
Registered: August 27th, 2002
Member Is Offline
Location: Gympie, Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Fruity as a nut cake...
|
 posted on August 15th, 2005 at 12:10 AM |
|
|
Hmm... Been a while since I was on here. Been learning to cope with things people shouoldn't have to cope with... Anyway...
My Supa Sport (AKA Wiggle's car) is turning into a longer term rebuild than I had originally planned. It's heading towards a fully gadgetised
machine, with electrically adjustable everything (including Lexus 2 way electric adjust steering column), air con, electric removable convertible top,
latest model Subi/Ford/Holden crystal lights all round (a mixture to fit into the buggy shape), new interior with everything fully moulded, lots of
reshaping of the fibreglass to blend everything together, and the same red paint it had last time...
I'm bolting my other buggy together in the meantime, so I'll be able to head beachward again soon. It's the Astrum Roadster. I've got everything
but the motor and aluminium pipe for the barwork (full end to end cage) sitting there waiting to be painted and assembled. Got full set of nice Colt
seats (split fold rear) and some of the other buggy's bits are being handed down to it, since they won't be used in it's rebuild. I'm trying to
keep weight to a minimum in this one, by using a folded and welded aluminium chequerplate tub in place of the original pan halves, all aluminium
rollbars including seperate hoops for front and rear seat rows, and the body is slightly thinner than usual with everything being one piece... This
one will have very few bolts, lot's of Sikaflex, and a new air cooled motor (not VW, or Chev). Simplicity is the aim with the Astrum. Anyway, just
have to put some more serious effort into bolting/gluing things together now, although I have put a heap of effort already into gathering all the
parts for these two buggies. I can barely make my way from one side of my workshop to the other at the moment...
 |
|
|
| Pages: 1 2 |
