Board Logo
Go To Bottom

Printable Version  
[ Total Views: 309123 | Total Replies: 1582 | Thread Id: 58055 ]
 Pages:  1  2  3  4  5  ..  53
Author: Subject:  What has Dave Been Up To? 29th AUG 2015: 10.66@126.09mph!!
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on January 23rd, 2007 at 05:38 PM



Quote:
Originally posted by dangerous
Quote:
Originally posted by vwfastback
Are you putting the dyno for the light frm the bik, against the wheel as well Dave?

James C.


Yes I was thinking of doing that James, but not enough engine power to turn one of those dynamos,
so a couple of AAA batteries should do the trick.


LOL... Gotta love all this hitec stuff!




FUCH your early!

http://www.noh2o.org/ 
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on January 31st, 2007 at 01:44 PM



All ready for the testamatune t'sarvey.(wed night)
It is very hot here today, I hope the afternoon thunderstorms stay away.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2177.jpg

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2179.jpg

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2178.jpg




Quote:
Originally posted by westi
That's mad Alan.
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on January 31st, 2007 at 03:39 PM



see ya there.

The joy of working only 15mins away from the track
MemberBoostn
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 28
Registered: April 21st, 2005
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on January 31st, 2007 at 05:47 PM



Good luck DB !

no wonder you have been quiet lately................




VOLLKOMMEN ART
nick@vollkommenart.com

Speed and Style
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

posted on January 31st, 2007 at 06:26 PM



lookin good :yes:

they're very wide wheely bars. is there a reason why they are so wide? just askin coz I was looking at some cars at Sydney drags and they had very narrow bars on em.




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on January 31st, 2007 at 11:17 PM



Hi Nick, been a bit quiet with a stomach bug that helped me lose 5kg over night, but I feel better today!

Hi Pete, yes, they are very wide apart, and this is due to them being mounted on to the suspension springplates, and the top shock mount .
On most Volksies they are on the frame horns, and V8 cars (well, front motored anyhow), have to be narrow to fit between the tyres.

I was reasonably pleased with the out come of the test and tune, but also a little frustrated.

5 runs.

Car weighed 1783lbs=810kg.

11.96@117.1 bogged start, but best yet MPH.(5100 two-step on the launch)

12.47@115.71 bogged worse and missed 2nd gear...shocker, even with 5800 on the two-step.

11.439@117.96...good fast run, just a little slow in the 60@1.60 (just launched by feel...NO two step)
Best ever speed and close to my 11.431 best with 1.54 sixty footer.

11.576@117.16 felt clean, but not that fast. Perhaps I leaned it off too much.

12.07@116.97 Richened it back up. But bogged the start real bad (doh!!!) 1.998, my 40horse was faster than that!!

My maths says it was pulling 7365 RPM in top gear at 117.96mph.

Flywheel horsepower is 228.4 at that best speed.

Gotta get rid of that big duration cam!

[ Edited on 31-1-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 1st, 2007 at 06:59 AM



Thanks to Stanley, Dak-a Tak, and RAZ34 for coming out to help.



Quote:
Originally posted by westi
That's mad Alan.
MemberBoostn
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 28
Registered: April 21st, 2005
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on February 1st, 2007 at 11:48 AM



good stuff Dave,

is that the new roller?




VOLLKOMMEN ART
nick@vollkommenart.com

Speed and Style
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 1st, 2007 at 12:00 PM



No, same one as Warwick.
Next run will be with new roller for direct comparison.




Quote:
Originally posted by westi
That's mad Alan.
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on February 1st, 2007 at 07:50 PM



Quote:
Originally posted by dangerous
Thanks to Stanley, Dak-a Tak, and RAZ34 for coming out to help.


Davo, I should be thanking you. Talking with you Pete and Rod inspires me. I feel I'm getting more than I give from the knowledge and experience you guys have and a willing to share.

and I wanted those chips so bad....but I didn't give in Dave.....:P
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on February 1st, 2007 at 08:45 PM



Lookin' good there Dave..... Your times are pretty (consistently!) impressive given the HP your producing..... But you better lay off the chips if you looking for serious improvements!!!!

:P




FUCH your early!

http://www.noh2o.org/ 
MemberBoostn
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 28
Registered: April 21st, 2005
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on February 1st, 2007 at 11:17 PM



Quote:
Originally posted by dangerous
No, same one as Warwick.
Next run will be with new roller for direct comparison.


That's it Dave,
waste more of your time and money doing all the R&D for all of us all !!!

Hard work, the only way to get it right.
I think some people think you put it all together and like magic it runs numbers..........




VOLLKOMMEN ART
nick@vollkommenart.com

Speed and Style
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 2nd, 2007 at 07:35 AM



Quote:
Originally posted by humpty
But you better lay off the chips if you looking for serious improvements!!!!
:P


Yes those wheely bars and bigger CVs have put my car about 30lbs heavy.(for the class)
I lost over 30 kg in the past, and I am about 6 up on that minimum right now,(76kg)
so I am trying to lose another 10 lbs.
At this rate(lost 1kg per week since new year, I will be there by the time I race again.

A chip here or there is fine, as long as I keep up my 12km per day walk!




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 2nd, 2007 at 07:45 AM



Quote:
Originally posted by Boostn
Quote:
Originally posted by dangerous
No, same one as Warwick.
Next run will be with new roller for direct comparison.


That's it Dave,
waste more of your time and money doing all the R&D for all of us all !!!

Hard work, the only way to get it right.
I think some people think you put it all together and like magic it runs numbers..........


Yes unfortunately it takes a lot of time and effort to dial some combos in.
I have spent a lot of time and money over the last 16 years to buy some good stuff, but most of the equipment adds nothing to the speed,
only to the reliability and the repeatability.

As an example, the Pauter case is nice, expensive, and heavy,
but if I had spent those dollars on head work I would be running in the 3's by now.

But because I am in this for the long haul, (no flash-in-the-pan fame for me!),
I have chosen the 'slow and productive R&D path' to learn and document all the changes I have made.
(I have 26 exercise books full of info)

Some things work and some don't, and either way, I will want to know WHY.

What ever I find, or have found, is available to anyone for the asking. No point keeping it all to myself.

[ Edited on 3-2-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 4th, 2007 at 09:30 AM



I have a list of things I need to take care of before I run again in a month or so.

First and main thing will be to get the camshaft changed.
I am not looking for massive gains in HP here, just some of that lost ET in the first half of the track.
The last engine combo that I was running had a camshaft that was 20 degrees less (@.050")
than the current Pauter cam, and it was always faster to half track than this combo.
This new cam is about half way between the two.

This next Test & Tune will be the last opportunity to test before the Mini-Jam at the end of March.

Other things on the list are :

Sus out the brakes.
The rusty rotors off the chassis car were hopeless in the braking ability.
They were on the minimum thickness so I just wire brushed them...bad Idea...lucky the front brakes were there on a separate circuit!
I think there was more of my new pads on the OUTSIDE of the wheel after the first run.

I have to do something about the driver's seat.
In the past, I had enough 'back fat' to insulate my spine from the hard seat,
but these days, after a day's racing I end up with a lump about mid way up my back.
I am planning to shift the seat back and stick a bit of padding there.

I also have to repair the mount under the bellhousing.
I noticed that the weld had split when I unloaded the car on Thursday morning.

Some other things are a dicky power supply isolator switch, the wheely bars' sliding spring-collar is locked solid and needs 'unsticking', and some airbleed mods to my nozzle holders.

I will post some photos as I go to better explain these things.

[ Edited on 4-2-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on February 4th, 2007 at 09:37 AM



It never ends Dave.... Your list is as long as my ex-wife's 'to do list'..... Eternal!:sniffle:



FUCH your early!

http://www.noh2o.org/ 
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 4th, 2007 at 11:50 AM



This isolator switch is an old Bus (school, not VW) item made in England.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2182.jpg

It is of excellent quality, made from brass, copper and bakelite, with aluminium end plates.
Good old '50s technology.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2180.jpg

It had some built up green corrosion insde on the main contacts, so it just needed a clean-up.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2181.jpg

It is surprising how little of that green stuff can cut the power so completetely.
It wouldn't even light up the dash lights when it was not working.
But give the swich a twiddle(technical term) and it was sweet.

This was just one of those jobs that is an annoying fault that can become a huge issue,
especially if you are strapped in the car and a faulty switch is on the OUTSIDE.




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 4th, 2007 at 01:52 PM



Here is the back brake pad after 5 runs from new.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2183.jpg




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 4th, 2007 at 04:50 PM



Just checking that the cam was installed in the correct location,
and also the rod to cam clearance.

Will also have to check the journal diameter.

http://i113.photobucket.com/albums/n216/dangerous_05/Img_2185.jpg

The new cam is quite thick between the lobes, but because this case has a 6mm cam drop,
it will fit fine, even with the big Block Chev rod journal, Pauter Blower Rods.

I plan to install the new cam centralized within the old cam position.

Pauter cam was 38/68 intake and 78/28 exhaust(286@.050" on 110 lobe centre)

Hope new to be 34/63 intake and 70/27 exhaust...or there abouts...will see how it dials up....(277@.050" on 108)

[ Edited on 4-2-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 11th, 2007 at 04:54 PM



OK, Cam is fitted and dialled in.

Lift at the valve with zero lash is .665" inlet (1.6 rocker),
and .595" exhaust (1.4 rocker).

Inlet is installed at 33/63 , and 70.5/27.5 for the exhaust.

Also checked all the bearings.
All was sweet 'til I got to #4 rod bearing.
The bearing was very shiney compared to the others.
It appears to have been run on some corrosion that had built up on the journal,
whilst the car sat still for the last 4 months since 'Warwick'.
Oh the joys of methanol fuel.

The adjacent rod journal(#1) is fed off the same oil hole in the main journal and was perfect,
leading me to believe it WAS NOT an oil supply problem.

I fixed up the spring-ends of the wheely bars also.
This was quite a mission. The Aluminium part had corroded inside the steel tube,
and I had to use a piece of tubing and a big nut to 'jack' them out.
They are supposed to slide with in the tube when the spring compresses.
All clean, lubed up and operational now.

I have also re-mounted the seat BACK about 2" to make it a bit more comfortable,
and give me some much needed seat belt length (NO not because of my belly).
Still have to stick some padding behind my spine.

Engine mount re-weld was a 5 minute job, and was due to lack of weld after trimming
excess material from under the bellhousing.

Just have to make sure the front brakes are AOK, some fresh oil in the engine,
and will be right to run again at the end of the month!

YE-HA!!




Quote:
Originally posted by westi
That's mad Alan.
MemberBoostn
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 28
Registered: April 21st, 2005
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on February 12th, 2007 at 11:01 AM



I knew you were a cowboy! lol



VOLLKOMMEN ART
nick@vollkommenart.com

Speed and Style
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on February 26th, 2007 at 08:42 AM



Car is all ready now to run again on the 7th of March (T&T).
The main thing is the cam change, but the fuel system will get some minor tweaks.

I recently purchased a computer program that can calculate
my ideal intake and exhaust lengths.

As I suspected mine are way wrong.

Looks like I have a new exhaust system in my future?
It should be an interesting project being that it will need much shorter primary pipes,
and I have a lot of fuel system parts to work around.




Quote:
Originally posted by westi
That's mad Alan.
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on February 26th, 2007 at 08:56 AM



Oh boy.... Gotta love the constant refinement challenges.....



FUCH your early!

http://www.noh2o.org/ 
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on March 14th, 2007 at 11:47 PM
NEW PERSONAL BEST!! 11.30@118mph!!


Last Wednesdays Test & Tune was a rainy day,
so I went up last night and had 5 more runs.

This was with the 10 degrees smaller cam from Jack Sacchetti.(277@.050" roller)

11.96@116(slow start)
11.85@116.9(another slow start, but reasonable MPH)
11.33@117.59 this was a personal best ET(I had richened the fuel system down low, but not up high)
11.484@117.47 (another reasonable run but not as good launch as previous)
I had cut the collector off a little to try...virtually no change.

11.303@118.2 !!!! Personal best!

I launched with more RPM and richened the fuel system up above 7000.
60 foot time was 1.505 and 1/8 mile was 7.157@94.5
All the increaments were personal bests.

RPM in 4th is 7380
HP maths says 229.8 with 1783lbs.

Very happy with the outcome.
Thanks to Pete for crewing for me,
and all the other Volksy Dudes that dropped buy to see us race(3 Volksies were there)

[ Edited on 14-3-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
Memberreub
Veteran Volks Folk
VWRX is gone...
*****


No Avatar


Posts: 2052
Threads: 160
Registered: September 2nd, 2002
Member Is Offline

Theme: UltimaBB Pro Blue

posted on March 15th, 2007 at 12:27 AM



Congrats Dave. Great to hear this news.



Reub
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on March 15th, 2007 at 06:37 AM



Hey Dave,

I think the reason you ran a personal best in the last race was the the car in the other lane pushing you so hard. I think you new it wasn't going to be easy......:P
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on March 15th, 2007 at 07:37 AM



Now you are hooked Andrew, there is no turning back!
Good to see the TAT turbo racing!




Quote:
Originally posted by westi
That's mad Alan.
MemberRAZ34
Seriously Crusin Dubber
**


No Avatar


Posts: 119
Threads: 1
Registered: August 9th, 2006
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on March 15th, 2007 at 07:43 AM



Good news Dave. You will have to do it again at Mini Jam so I can see it. How did Andrew go ?
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5900
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 538

posted on March 15th, 2007 at 09:04 AM



Andrew went well for his first time down the track.
17s@78mph I think, with 4 psi boost on the stock 1584cc.
Lots of room for improvement, and considering it is a stock weight '69, he is getting there!
No carb or dizzy tuning yet, and that was the first time he had given it some stick.

Col was there also, running 15.1@85 in his mega 1600.

[ Edited on 15-3-2007 by dangerous ]




Quote:
Originally posted by westi
That's mad Alan.
MemberLIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
******


Avatar


Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline

Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...

rsvdclap.gif posted on March 16th, 2007 at 10:50 PM



Nice job Dave!!! That little bit closer to that insane CRX from Online Performance.:tu:



[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]

Alder Outlaws VW Racing - check it out on fb!!
 Pages:  1  2  3  4  5  ..  53


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 25.1% - SQL: 74.9% ]
#Duration:Query:
1.0.00027990SELECT * FROM ubb_settings
2.0.00024104SELECT moderator FROM ubb_forums WHERE moderator != ''
3.0.00024819SELECT DISTINCT uid FROM ubb_members WHERE username = 'BUGBOY'
4.0.00015688SELECT DISTINCT uid FROM ubb_members WHERE username = 'MickH'
5.0.00014591SELECT DISTINCT uid FROM ubb_members WHERE username = 'barls'
6.0.00018787SELECT DISTINCT uid FROM ubb_members WHERE username = 'vanderaj'
7.0.00013685SELECT DISTINCT uid FROM ubb_members WHERE username = 'Cam'
8.0.00013900SELECT DISTINCT uid FROM ubb_members WHERE username = 'vw54'
9.0.00013399SELECT DISTINCT uid FROM ubb_members WHERE username = 'SuperOwen'
10.0.00014186SELECT DISTINCT uid FROM ubb_members WHERE username = 'helbus'
11.0.00016594SELECT DISTINCT uid FROM ubb_members WHERE username = '65busser'
12.0.00021601SELECT DISTINCT uid FROM ubb_members WHERE username = 'Baja Wes'
13.0.00014520SELECT DISTINCT uid FROM ubb_members WHERE username = 'Dasdubber'
14.0.00015497SELECT DISTINCT uid FROM ubb_members WHERE username = 'MISS VDUB'
15.0.00070906SELECT LENGTH(robot_string) AS strlen, robot_string, robot_fullname FROM ubb_robots ORDER BY strlen DESC
16.0.00026107SELECT f.fid, f.theme FROM ubb_forums f, ubb_threads t WHERE f.fid = t.fid AND t.tid = '58055'
17.0.00030398DELETE FROM ubb_whosonline WHERE ip = '34.239.179.228' && (username = 'xguest123' OR username = 'xrobot123' OR username = 'Anonymous') OR time < '1623961192'
18.0.00018406INSERT INTO ubb_whosonline (username, ip, time, location, invisible, robotname) VALUES ('xguest123', '34.239.179.228', LPAD('1623961792', '15', '0'), '/viewtopic.php?tid=58055&page=3', '0', '')
19.0.00016212DELETE FROM ubb_guestcount WHERE ((ipaddress = '34.239.179.228') OR (onlinetime < '1623875392'))
20.0.00009704DELETE FROM ubb_robotcount WHERE ((ipaddress = '34.239.179.228') OR (onlinetime < '1623875392'))
21.0.00009608INSERT INTO ubb_guestcount (ipaddress, onlinetime) VALUES ('34.239.179.228', '1623961792')
22.0.00022912SELECT * FROM ubb_themes WHERE themeid = '1'
23.0.00016809SELECT * FROM ubb_pluglinks ORDER BY displayorder ASC
24.0.00019097SELECT id FROM ubb_banned WHERE ((ip1 = '34' OR ip1 = '-1') AND (ip2 = '239' OR ip2 = '-1') AND (ip3 = '179' OR ip3 = '-1') AND (ip4 = '228' OR ip4 = '-1')) AND NOT (ip1 = '-1' AND ip2 = '-1' AND ip3 = '-1' AND ip4 = '-1')
25.0.00056601SELECT fid, type, name, fup, status, private, userlist, password FROM ubb_forums WHERE private != '5' AND private != '3' AND private != '2' AND userlist = '' AND password = '' AND status = 'on' ORDER BY displayorder
26.0.00016189SELECT themeid, name FROM ubb_themes
27.0.00095820SELECT name, template FROM ubb_templates WHERE name IN ('functions_bbcode', 'functions_bbcodeinsert', 'functions_smilieinsert_smilie', 'functions_smilieinsert', 'viewtopic_reply', 'viewtopic_quickreply', 'viewtopic', 'viewtopic_invalid', 'viewtopic_modoptions', 'viewtopic_newpoll', 'viewtopic_newtopic', 'viewtopic_poll_options_view', 'viewtopic_poll_options', 'viewtopic_poll_submitbutton', 'viewtopic_poll', 'viewtopic_post', 'viewtopic_post_email', 'viewtopic_post_site', 'viewtopic_post_icq', 'viewtopic_post_aim', 'viewtopic_post_msn', 'viewtopic_post_yahoo', 'viewtopic_post_search', 'viewtopic_post_profile', 'viewtopic_post_pm', 'viewtopic_post_ip', 'viewtopic_post_repquote', 'viewtopic_post_report', 'viewtopic_post_edit', 'viewtopic_post_delete', 'viewtopic_post_attachmentimage', 'viewtopic_post_attachment', 'viewtopic_post_attach_noborder', 'viewtopic_post_attimg_noborder', 'viewtopic_post_sig', 'viewtopic_post_nosig', 'viewtopic_printable', 'viewtopic_printable_row', 'viewtopic_multipage', 'viewtopic_post_attachment_none', 'viewforum_rules', 'viewtopic_post_blog', 'viewtopic_post_rpg', 'viewforum_mpn_info', 'viewtopic_next_prev_links', 'viewtopic_captcha', 'css', 'error', 'footer', 'footer_querynum', 'footer_load', 'footer_phpsql', 'footer_totaltime', 'header', 'message', 'meta_tags', 'shadow', 'shadow2')
28.0.00029111SELECT t.tid, t.fid, t.subject, t.views, t.replies, t.closed, t.topped, l.uid as lp_uid, l.username as lp_user, l.dateline as lp_dateline, l.pid as lp_pid FROM ubb_threads t LEFT JOIN ubb_lastposts l ON l.tid = t.tid WHERE t.tid = '58055'
29.0.00020790SELECT * FROM ubb_forums WHERE fid='74' AND status='on'
30.0.00013590SELECT code, url FROM ubb_smilies WHERE type = 'smiley'
31.0.00009918SELECT find, replace1 FROM ubb_words
32.0.00020909SELECT id, title, posts, stars, allowavatars, avatarrank FROM ubb_ranks
33.0.00030303UPDATE ubb_threads SET views = views+1 WHERE tid = '58055' LIMIT 1
34.0.00665689SELECT COUNT(pid) FROM ubb_posts WHERE tid = '58055'
35.0.01045179SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 58055 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline < x.dateline AND t.fid = '74' ORDER BY l.dateline DESC LIMIT 1
36.0.01012516SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 58055 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline > x.dateline AND t.fid = '74' ORDER BY l.dateline ASC LIMIT 1
37.0.00031400SELECT vote_id FROM ubb_vote_desc WHERE topic_id = '58055'
38.0.00428414SELECT pid FROM ubb_posts WHERE tid = '58055' ORDER BY pid LIMIT 60, 30
39.0.00042105SELECT * FROM ubb_attachments WHERE pid IN('566609', '568611', '568625', '568666', '568676', '568789', '568816', '568884', '568886', '569007', '569042', '569137', '569168', '569171', '569731', '569733', '569764', '569788', '569833', '571750', '571934', '575520', '575522', '578599', '578602', '578608', '578617', '578621', '578642', '579095')
40.0.00557184SELECT p.*, m.*,w.time FROM ubb_posts p LEFT JOIN ubb_members m ON m.username = p.author LEFT JOIN ubb_whosonline w ON p.author = w.username WHERE p.fid = '74' AND p.tid = '58055' ORDER BY p.pid ASC LIMIT 60, 30