| [ Total Views: 1127 | Total Replies: 9 | Thread Id: 65468 ] |
|
|
 Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
| posted on October 9th, 2007 at 10:21 PM |
|
|
Karmann Ghia resto begins... again
Well, where to begin.
Not sure if anyone recalls me starting a similar thread a few months ago after purchasing a partially restored ghia.
Unfotunately life got in the way -as it tends to- many circumstances changed and the poor girl had to get put on the sidelines again for a little
bit.
When I last left you guys I (from memory) had just completed an IRS conversion (to compliment the previous owners change to balljoint front end) and
was about to paint the 'pan.
After getting home from the UK and EU a couple of weeks ago I decided to rip into the resto with full force to make up for lost time.
I disassembled the 'pan (had been put together to keep weather tight & save space) loaded it onto a trailer and took it over to my mate Ryan's body
shop.
He graciously let me take up a corner of the shop for a few days whilst I frantically ground, brushed, srubbed and sanded it back to a uniform surface
to then be etch primed, seam sealed, body deadened (in certain areas) and hit with a coat of matte chassis black.
 and no the black and white filter wasnt intentional 
The previous owner had fortunately done rust repairs MANY moons ago so the pan is now solid as all hell, saving me heaps of work! Any cancer that was
in the pan has been cut out using sections from brand new beetle inserts (since ghia sides werent available at the time), lots of time, measuring,
jigging and prep has obviously gone into making sure the beetle pan ribbing lines up with the solid sections that remain of the original ghia pan and
only minimal welding evidence (left for strength reasons) remains.
Better shots in colour and sunlight are on the way...
[ Edited on 9-10-2007 by Cam ]
|
|
|
Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
 posted on October 9th, 2007 at 10:34 PM |
|
|
Seats...
Seats have been the biggest headache thus far.
I have std ghia seats, but unfortunately no runners on the pan! Many forum postings and head scratching lead to minimal options. This coupled with my
preference for seats with a highbacks and bolstering left me a little torn.
I headed down to Revolution Racegear to sus out what is available in the aftermarket that would give me modern levels of comfort and safety, be
relatively easily approved by the powers that be and still be sensitive to the era of the car.
We were only able to find one seat in the Cobra range that I was drawn to, but still not entirely happy with the style...
Ideally I wanted tombstone seats (similar to an early 911) that would recline and flip forward to access the rear seat area.
The guys were really helpful and gave me heaps of info to keep in mind... I ended up grabbing a couple of universal sliders to mock up and continued
on the hunt.
I ended up finding these SAAS seats on ebay and only 20 mins away from home. They will definately get a retrim but were spot on with regards to style
& function...
|
|
|
Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
| posted on October 10th, 2007 at 07:58 PM |
|
|
Started on the welding again today...
The heater channels have all been done by the previous owner and this is just beyond the A pillar.
Initially it appeared to be the topside skin (had already been cut out & patterned for a replacement piece of tin to go in by P.O) but on closer
inspection there were some pin holes in the bottom section too. I decided to not short cut it and get rid of cancer properly...
:duh
After many hours of measuring, templating with cardboard, etc... I finally had a replacement piece made up with the original 13mm body bolt tacked
back into place ready to be fitted up.
This is a bitch of a job, not only does it mean welding upside down but the shape of the channel at this point (just after the A pillar) means that
there is not only a curve running along the car lengthways, but a right angle bend going down just on the lip of the lower piece so as it can meet the
top skin of the channel, mate, create a double skin and hang over the inside ledge of the 'pan....
Not to mention that the bolts themselves kind of dip down towards the ground, so you have to get the piece tacked in and then fiddle with the
alignment - hence it looking malaligned partway though.
Lots of f*&^ing around but got all the bends, shapes, etc... and all welded in. Welds were abit fish batter-ish on the underside so I did most of them
again  - still not the prettiest but have all penetrated, are
sealed and solid. Plus, I'm sure you'll all agree that atleast its all done and shaped properly now.
Shall take better pics tomorrow :-D
[ Edited on 10-10-2007 by Cam ]
|
|
|
Vyper
Learner Dubber
Posts: 2
Threads: 0
Registered: October 10th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
 posted on October 10th, 2007 at 08:29 PM |
|
|
Looking good Cam
Though you aussie's should be grateful for the lack of rust you have to deal with... as you saw on your recent Northern Hemispherical trip dude!
Take it easy mate.
Vyper |
|
|
Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
| posted on October 10th, 2007 at 08:57 PM |
|
|
blah, blah, rust, rust...
Seems like it's all I heard from you guys whilst I was over there
|
|
|
Vyper
Learner Dubber
Posts: 2
Threads: 0
Registered: October 10th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 11th, 2007 at 12:14 AM |
|
|
| Quote: | Originally
posted by Cam
blah, blah, rust, rust...
|
Yeah right you wanted to bottle it to prove to your aussie mates it existed!!!
Less whinging more welding Death bunny!! |
|
|
Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
| posted on October 11th, 2007 at 12:54 AM |
|
|
| Quote: | Originally
posted by Vyper
Less whinging more welding Death bunny!!
|
Can't say I have the foggiest idea of what you're on about, sir!:jesus
|
|
|
VWFREAK
A.k.a.: Peter / Bones
Son of Jim - Creator of Good
VWFREAK
Posts: 2577
Threads: 264
Registered: May 11th, 2004
Member Is Offline
Location: ACT
Theme: UltimaBB Pro Blue ( Default )
Mood: FREAKY
|
| posted on October 11th, 2007 at 09:02 AM |
|
|
Good luck with the resto, thank god my KG was rock solid when I imported it from Nevada.
Worth every ounce of sweat and welders burn when she's finally done.
|
|
|
Cam
Custom Title Time!
Posts: 1535
Threads: 187
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: addicted
|
| posted on November 9th, 2007 at 08:32 PM |
|
|
Thanks Peter, I keep telling myself that & just focusing on one secton at a time. It's rock solid overall, just a few annoying spots need work.
Plus I'm a perfectionist - if it's already stripped may as well do it all properly rather than just quickly getting it together.
Back to it:
Been really sick over the last few weeks, now that I'm better it's straight back into it
Decided to drag it out of the carport and after much discussion figured out a way to get her up on her side.
 This will make all the
stripping back, prepping & painting of the underside MUCH easier.
Speaking of which:
Here is under the fuel tank after one round of buffing back with a wire wheel.
 I have brushed on a coat of
rust converter/de-oxidizer for the moment and left the lower (spare wheel well) section As Is to show how it used to look. Will finish it up when I'm
done with the inner guard (see below)
Under the guards, also after one hit of the wire wheel on the angle grinder (you can see the repair sections done by previous owner) 
Took forever to do and only 1/2 way through, but it's necessary if I wanted to get rid of all the surface rust & tar based sound deadner.
In the process, uncovered some suprises which otherwise would of remained well hidden:
After another round with the grinder, drill and dremel fitted with respective sized wire wheels and a coating of rust converter/de-oxidizer
Hacked out the rusted section of the fresh air duct have got to clean up the edges with a dremel still, but it atleast gave me access to get in there
with said tool & a couple of wire wheels. Cleaned off all the surface rust and treated with... guess what 
Got a quality control officer keeping tabs
|
|
|
vwsteve
A.k.a.: steve
Veteran Volks Folk
karmann crazy
Posts: 2087
Threads: 200
Registered: July 25th, 2006
Member Is Offline
Location: Redcliffe QLD
Theme: UltimaBB Pro Navy
Mood: Busy!
|
| posted on June 6th, 2008 at 02:26 PM |
|
|
.
in my opinion there is no such thing as an easy kg resto, they are always bogged up and full of nasty surprises, just keep battling on
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
|
|
|
