Posts: 976
Threads: 246
Registered: November 24th, 2004
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always asleep
posted on January 29th, 2008 at 12:15 PM
WTD: Brake Calipers off 01-05 WRX
Im after a set of front and rear brake calipers off a Subaru WRX from 01-05.
Anybody?
Thanks, Andrew
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers.
How many sets of lights does it take a $229k Carrera S to learn?
UPDATE: Cayman S, M3, B4 now added to the list.
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
posted on January 29th, 2008 at 06:34 PM
Andrew , 01 wrx will set you back $800.00 05 will set you back around $1300.00
The wrx calipers are made of cast iron & they are heavy
If you look out side the ball park you can get hold of Nissan 300z > R32 4 pot ally calipers c/w pads & disks for around $300.00 ( I have
another set that I have just removed from my nissan front cut 4 sale ) these are made of ally & a very light , they also take the same pad as the
subaru units .The nissan rears are the same unit as the subaru ones , same mould but nissan had NISSAN placed in the mould insert
I am guesing this is for the wags & I hope this may help what you are doing .If you after a set of nissan calipers as above drop me a Pm
cheers seagull
Looking for that special lady : PM me for coffee & cake
GTMac
A.k.a.: Andrew
Fahrvergnugen
Posts: 976
Threads: 246
Registered: November 24th, 2004
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always asleep
posted on January 29th, 2008 at 09:37 PM
Seagull,
Actually not for my VW this time. I am sourcing a set as requested because they are an upgrade to what Suby put on the B4's, pretty stupid that the
B4's didnt get atleast the same set up as the standard WRX.
Thanks for your info...................now that you know what I actually need them for, even though the R32 Front) take the same pad I dont assume
they have the same mounting holes etc to bolt onto the Suby? So what you are saying the rears will bolt on and imagine you could just polish away the
NISSAN logo?
If all I say is a load of crap happy to take a full set of WRX 01's off you if you can get them or have them.
Thanks, Andrew
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers.
How many sets of lights does it take a $229k Carrera S to learn?
UPDATE: Cayman S, M3, B4 now added to the list.
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
posted on January 30th, 2008 at 12:49 AM
Quote:
Originally
posted by GTMac
Seagull,
Actually not for my VW this time. I am sourcing a set as requested because they are an upgrade to what Suby put on the B4's, pretty stupid that the
B4's didnt get atleast the same set up as the standard WRX.
ok I never would have thought !
Thanks for your info...................now that you know what I actually need them for, even though the R32 Front) take the same pad I dont assume
they have the same mounting holes etc to bolt onto the Suby?
no you need an adapter for this
So what you are saying the rears will bolt on and imagine you could just polish away the NISSAN logo?
yes if you have the backing plate & the disk from a two pot rear wrx
If all I say is a load of crap happy to take a full set of WRX 01's off you if you can get them or have them.
I can get you wrx fronts & nissan rears
Now here is another one ! I have an adapter from your stock B4 rear backing plate so you can fit the lager wrx vented disk on using a nissan caliper
.
The subaru brakes are expencive & getting harder to locate .I see what I can do
Thanks, Andrew
Looking for that special lady : PM me for coffee & cake
UPDATE: Cayman S, M3, B4 now added to the list.
