| [ Total Views: 135318 | Total Replies: 1114 | Thread Id: 67327 ] |
| Pages: 1 .. 4 5 6 7 8 .. 38 |
|
|
 humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on March 5th, 2010 at 10:50 AM |
|
|
| Quote: | Originally
posted by colonel mustard
it's a shame mate. cant you get it plated for your mods??
|
The only major mod on the car is the turbo.... Which should pass without an issue as the car is a pre-76 built machine.... He may want brake upgrades
too of course, but we will cross that bridge later.... The rest of the mods past inspections last time.... The points he picked me up on are the
temporary things that I have done to make the conversion to turbo easier... Carpet was planned to go back in and stock smoothies will be rolling for
the street... The ERCO's are for the drags only... I just don't have to coin for new street tyres right now...
| Quote: | Originally
posted by cnfabo
oh no, humpty, i just noticed that they have put the yellow sticker on a angle, dunno if u know, but thats a sign for the guy at the pits too not let
u pass.... the cop who pulled u over must of had serious sore ass syndrome!!!!! good luck dude.. c u down the retro drags on the 14th
|
It's pretty straight Chris.... Just looks off in the pic.... When they fit it at an angle, it's very obvious.... The dude that pulled me over really
had it in for me.... "been looking for" were his words... I must be a criminal or something.... Surely that must be it!?... Not gonna make the drags
either... Helping the in-laws move house that weekend... 
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on March 5th, 2010 at 08:42 PM |
|
|
Bummer dude....sorry to here.
They fear what they don't understand....maybe they were worried that if they had to give chase they wouldn't keep up.
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on March 5th, 2010 at 10:12 PM |
|
|
If I get the sticker off, then all is ok.... But if not, I may be taking yet another leaf out of your book Andrew, and make the POS a full-time drag
car.... Be a shame really, as is awesome to have that sort of power on the street....
Jobs done today.... Got the 4" out and the 2" in with stock spindles.... Drums on, brakes adjusted and stock smoothies on... Have it back on the
ground tomorrow.... Bumpers will go back on next, then its time to get the interior sorted... Should be ready for the inspection late next week I
reckon.... If not, I'll be set for the week following for sure....
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on March 6th, 2010 at 09:12 AM |
|
|
Hey Simon haven't you had a sticker before?
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on March 6th, 2010 at 10:38 AM |
|
|
Yep.... A few times.... This car has had it twice in the past two years... I must be getting good at it!!!!!
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on March 7th, 2010 at 11:27 AM |
|
|
Sounds to me like the boys in blue (or what ever colour they wear over there) have it in for you.
good luck Simon
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 20th, 2010 at 12:42 AM |
|
|
yawn
Looking for that special lady : PM me for coffee & cake
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on March 20th, 2010 at 10:28 AM |
|
|
Surely you have something better to do Neil?
Go and finish that bloody Datsun!
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 4th, 2010 at 12:01 AM |
|
|
Yawn ( again )
My datsun is just doing fine, It will smoke this peice of poo your building any way, so get your shit together
Gen 2 is ready to drag when you are , hello ( ! ) Hello ( ! ) give you a head start as well 
Looking for that special lady : PM me for coffee & cake
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on April 4th, 2010 at 03:01 AM |
|
|
POS is off the road indefinitely...
As a result of getting a defect notice on the car a few weeks back, I had to take all the HiPo gear off the car, and convert it back to stock... In
going through the inspection last week, rust was 'found' and the car did not pass inspection.... On closer inspection, I have found the rust is much
worse in the LHS heater channel (the only rust in the whole car!!!) than first thought... I have run out of time to effect a sound repair, so have
decided to pull the car off the road for the time being...
The plates go in to the RTA on Tuesday....
Once I have done the work to make it sound once more, I will get it rego'd and rolling.... Then its time to go through all the bullshit legal stuff
(to permit the turbo, trans, braking and suspension upgrades) that took it off the road in the first place....
It seems that WA cops have no sense of humor....
|
|
|
reub
Veteran Volks Folk
VWRX is gone...
Posts: 2053
Threads: 160
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on April 4th, 2010 at 12:19 PM |
|
|
Bugger dude... Don't you love hitting the wall with a project... I've done the same with the 58 - another story though
Reub
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 4th, 2010 at 01:07 PM |
|
|
See , subaru wins the race . The true sleeper
let me know when you get it on the road again
Looking for that special lady : PM me for coffee & cake
|
|
|
LIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline
Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...
|
| posted on April 4th, 2010 at 06:58 PM |
|
|
| Quote: | Originally
posted by seagull
See , subaru wins the race . The true sleeper
let me know when you get it on the road again
|
"yawn" yep that word "subaru" definately puts me to sleep...
Tough luck on the defect mate. But then again you might have never foudn the rust till it was getting beyond a not so big repair.
[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]
Alder Outlaws VW Racing - check it out on fb!!
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on April 4th, 2010 at 09:24 PM |
|
|
| Quote: | Originally
posted by seagull
See , subaru wins the race . The true sleeper
|
Eerrmmm..... I don't think so..... A 'true' sleeper is a vehicle that has been modified to do things, that it was never designed to do....
Your Subaru's are factory built performance cars....
Hardly sleepers....
Build a fast Subi powered VW.... That is the definition of a 'true' sleeper!
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on August 29th, 2010 at 07:11 PM |
|
|
Been working on the POS these past few days..... Refitting all the turbo gear and such.... Made a few minor mods to the car as well.... changed the
fuel system to a none return set-up as advised by others.... Fabricated and fitted a rear tramp bar and made 'new' throttle spindle linkage as the
other one was cactus.... As a result of these efforts I got the POS started today.... No leaks from what I can see, the new carb linkage is working
well.... Nice light pedal, full return and no slop in the linkage at all.... Runs a little rough, very rich and seems to be popping a little at
idle.... Fuel pressure is out of control (prolly why its running rich) and I think I may have coked up the sparkplugs....
Gonna pull the FPR tomorrow arvo and strip it down or maybe replace it with another Holley FPR I have set aside as a spare.... Will pull the plugs
also.... Still need to fit the O2 gauge and harness and fit the shift light...
Got some work ahead of me, but the drag season is about to start and I want to race!
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 8th, 2010 at 08:34 PM |
|
|
Hey fellas.... As some of you know.... The POS has been put back into draw-through turbo guise suckin' on a 45DCOE... I have changed the return fuel
set-up to a non-return gig (on advise from those in the know) and fitted a Holley 12-804 (0-4psi) regulator.... At this stage it is NOT boost
sensitive.... Been talking to a few peeps about this and all say do it, so I will.... But I have a couple of small questions....
1. What would you lot suggest I use as a vacuum/boost check valve?
The next issue is this..... I just fitted the reg tonight to make sure it was all sealed up good and solid, turned the key to prime the system and
promptly got a waterfall of fuel entering the throats.... The reg is not coping with the pressure of the Holley Blue pump!!!
2. Any suggestions?
|
|
|
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
|
| posted on September 9th, 2010 at 05:22 AM |
|
|
Use a red reg with the blue pump, and make sure the reg is clean.
If dirty, you will get the full pump ressure of about 16psi.
Your 0-4 psi reg should be OK, but may have crap in the ball.
I used a boost gauge that was actually a snap-on low pressure tyre guage,
and the check valve in that worked well,
as did the one in the "memory kit" that came with the autometer guage I ended using.(when boost went to 42psi).
I did use one I found as a part of some polution equipment a a jap wreckers, but cant recall what it was for.
All depends on your plans for the check valve....pneumatics and hydraulic places stock all sorts.
| Quote: | Originally
posted by westi
That's mad Alan.
|
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 9th, 2010 at 11:26 PM |
|
|
Oh I'm getting full pressure!..... The gauge is reading right up there!!!!
The Holley 12-804 (0-4psi) regulator is actually what is called a Holley "Red" and its brand new.... I have a non-genuine Holley "Blue" here also,
which was fitted before, but would not regulate lower than 4.5psi (adjuster screwed all the way out).... I'll have another go at the "Red" tomorrow
and check for crap in the ball as you suggest Dave...
As for the check-valve.... I have found a check-valve that is used on Subaru emissions that looks very neat.... The check-valve is purely to control
the the flow of boost anf vacuum to the top of the FPR.... Only want boost to enter the FPR bell.... Vacuum can suck the FPR diaphragm on
decell/cruising which could stop the flow of fuel to the carb.... Or so I have been told.... Will plumb the Subi part in and see how we go....
Thanks for your advise Dave.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on September 9th, 2010 at 11:44 PM |
|
|
looking good Simon  ............i need to find an excuse to come to
Perth for a cruise !!
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 10th, 2010 at 12:03 AM |
|
|
Always welcome Craig.... No more Red Bull Air Races for WA!!!!!.... Reuben's coming down this way next week for a little VW time... Drags on
Wednesday night and beers with the local VW crowd on Thursday (third Thursday of every month)... See if you can pencil that in...
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on September 12th, 2010 at 01:44 PM |
|
|
I say try it without the muffler first. you can always throw a hotdog or bike muffler on later if you get pulled up.
|
|
|
BeetleJuice
A.k.a.: Craig Paton
Officially Full-On Dubber
Posts: 350
Threads: 37
Registered: September 27th, 2006
Member Is Offline
Location: Toowoomba
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 12th, 2010 at 05:27 PM |
|
|
| Quote: | Originally
posted by humpty
Oh I'm getting full pressure!..... The gauge is reading right up there!!!!
The Holley 12-804 (0-4psi) regulator is actually what is called a Holley "Red" and its brand new.... I have a non-genuine Holley "Blue" here also,
which was fitted before, but would not regulate lower than 4.5psi (adjuster screwed all the way out).... I'll have another go at the "Red" tomorrow
and check for crap in the ball as you suggest Dave...
As for the check-valve.... I have found a check-valve that is used on Subaru emissions that looks very neat.... The check-valve is purely to control
the the flow of boost anf vacuum to the top of the FPR.... Only want boost to enter the FPR bell.... Vacuum can suck the FPR diaphragm on
decell/cruising which could stop the flow of fuel to the carb.... Or so I have been told.... Will plumb the Subi part in and see how we go....
Thanks for your advise Dave.
|
Hey Humpty
Have you considered running a Mallory Fuel Pump with lower pressure than the Holley? I guess it depends on your volume requirements.
Mallory 4070 pumps around 5.5 psi and 72gph unrestricted. At 3-4psi restricted pumps 30gph.
Maybe this one:
Model 110 High Performance Electric Fuel Pump
• High pressure, 12-volt fuel pump delivers 110+ GPH free
flow @ 12.5 volts
• Internal bypass regulator factory set at 7 PSI
• Delivers 90+ GPH at 6 PSI
• 3/8" NPT thread size, 3/8" or larger fuel line recommended
• Use regulator part number 4207, 4210, 4307M, 4316M or 4309
for best performance
• Service parts available for use with alcohol/
methanol applications
Craig
FringeDweller
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 12th, 2010 at 11:36 PM |
|
|
Thanks for the heads up Craig.... I'm currently looking at al options.... There has to be a solid and good value way to do this....
A dude in the US that I have been talking about DCOE jetting, has suggested I do as he has done on his sand drag car.... He describes it thus...
"Here is how I plumb the system, at the pump, install the higher pressure regulator, and upstream, near the carb, install the second low pressure
regulator. You modify the low pressure regulator by removing the diaphragm cover, and drill and tap on the side of the cover for a small 1/8" hose
barb. At this location, you run a hose from the diaphragm cover to the boost side of the system. In this hose you need to install a check valve. The
check valve needs to allow boost pressure to flow toward the regulator, but not allow engine vacumm to draw against the regulator diaphragm. You set
the low pressure (upstream) regulator at 1 1/2 psi, and the downstream (near the pump) at around 4 to 5 psi. The engine will see the upstream
regulated pressure when normal running, when on boost, the signal from the boost side of the system will depress the upstream diaphragm. This will
increase the upstream fuel pressure to the level of the downstream regulator. This is the method used by many turbo guys..."
I have read this sort of thing before and from all reports it seems to be the go.... Of course there are a few fellas that feel this is not the best
move.... 2Stroke seems to think I need to spend more money, but as yet he's not really been too helpful.... I know he's coming around to the idea
and is very knowledgeable, so I wait for is reply on this....
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on September 13th, 2010 at 06:49 AM |
|
|
hey Simon...get hold of a copy of Turbomania (Bob Tomlinson) from memory there is a heap of info on DCOE carbs and setting up. They were all the rage
when the book was written.
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 13th, 2010 at 12:11 PM |
|
|
| Quote: | Originally
posted by Stanley
hey Simon...get hold of a copy of Turbomania (Bob Tomlinson) from memory there is a heap of info on DCOE carbs and setting up. They were all the rage
when the book was written.
|
Yeah got that.... But Bob is into Dellortos.... Not a lot of info on webers unfortunately.... But I think I'll have another look through it... There
might be something golden in there to help me with these issues....
Thanks for the reminder!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on September 13th, 2010 at 12:40 PM |
|
|
The dual regulators sounds feasable. My main question is how does the boost pressure bleed off from the secondary (low pressure) reg with the check
valve? The way I see it, 1st time the reg sees boost, the pressure will remain behind the check valve and then the primary reg will take over until
off boost for how long until the pressure bleeds off.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
|
| posted on September 13th, 2010 at 12:58 PM |
|
|
| Quote: | Originally
posted by humpty
.... But Bob is into Dellortos.....
|
He was only into dells when that was all he sold,
now they sell webers they dont bag them anymore.
From memory there WAS some good info in there regarding webers, but yes, not as much as the Dell's since that was what they sold.
My advice to you simon, is to KISS.
Use a pump that's flow is up to the job,
and a reg that can keep pressure down where your carb needs it.
If you want a rising rate reg, then get one that is off the shelf.
The go race.
| Quote: | Originally
posted by westi
That's mad Alan.
|
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on September 13th, 2010 at 07:47 PM |
|
|
| Quote: | Originally
posted by dangerous
| Quote: | Originally
posted by humpty
.... But Bob is into Dellortos.....
|
He was only into dells when that was all he sold,
now they sell webers they dont bag them anymore.
From memory there WAS some good info in there regarding webers, but yes, not as much as the Dell's since that was what they sold.
My advice to you simon, is to KISS.
Use a pump that's flow is up to the job,
and a reg that can keep pressure down where your carb needs it.
If you want a rising rate reg, then get one that is off the shelf.
The go race.
|
Hahaha.... Yeah I know your right Dave.... Nick just sent me a message that woke me up!.... I've been a stupid bastard... Nick suggested the simplest
option and one I know to be right.... Just fit a Malpassi and be done with it!.... Just need to order a single outlet rising rate number...
|
|
|
fat-attack
Casual Dubber
Posts: 38
Threads: 5
Registered: June 22nd, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 14th, 2010 at 06:56 AM |
|
|
hey POS, got a twin dellorto setup in the mail at the moment for a 2276. Will post up how it goes with in when i get the chance to get it installed
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on September 14th, 2010 at 07:01 AM |
|
|
Good call on keeping it simple. I decided to go home and have a flick through turbomania again for myself (was either that or watch X factor). All the
systems with side draught carbs were fairly simple unless you went blowthrough or were running huge boost.
Also re-read the bit where he bags 4 barrel carbs......
|
|
|
| Pages: 1 .. 4 5 6 7 8 .. 38 |
