Posts: 2
Threads: 1
Registered: March 8th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on March 8th, 2008 at 07:00 PM
ej22 alternator connections
Hi all,
I am helping a friend with the wiring of VW based ICV, it is fitted with an ej22 engine. We have done all the wiring except for the alternator.
The alternator has 4 lugs for connections, the wiring diagrams we have been working from only have 2, we have looked at a couple of Subarus with these
engines fitted, but they only have 2 as well.
We did not get any wiring for the alternator, though we do know where the wires go to from the diagrams we have. The problem is which lugs do we
use?
Any help or advice would be greatly appreciated
Thanks
Steve
lexm
Commited Dubber
Posts: 57
Threads: 0
Registered: April 5th, 2004
Member Is Offline
Location: Brisbane Qld
Theme: UltimaBB Pro Blue ( Default )
posted on March 8th, 2008 at 08:48 PM
looking at a harness now
In your picture
upper left no connection
lower left heavy white wire (to battery positive
upper right black white trace (charge light))(ALT 1)
lower right yellow (ignition via fuse )(ALT 2)
captain_z3r0
Learner Dubber
Posts: 2
Threads: 1
Registered: March 8th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on March 10th, 2008 at 02:42 PM
thanks lexm,
That's just what I need.
The Bigfella
Officially Full-On Dubber
Posts: 284
Threads: 16
Registered: September 9th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Lotsa German cars, 1 Brit, 1 Rice
