Posts: 370
Threads: 71
Registered: August 28th, 2002
Member Is Offline
Location: Geelong
Theme: UltimaBB Pro Blue ( Default )
Mood: Low
posted on April 16th, 2008 at 09:47 PM
Rear sway bar install help needed
Trying to install a rear whiteline sway bar on the back. The instructions I have are very limited, and I cant seem to get the bar to fit between the
mounts at the base of the shocks. See photo.
Do I have to load the bar somehow to bend it to fit, and how would I do this?
All the bolts are loose at the moment, so it looks a bit sloppy, but its just halfway in the process.
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
posted on April 16th, 2008 at 10:04 PM
flip the bar up so it is above the mounting 'box"....have a look at the links below
i mark the center point on the sway bar and tighten the u bolts over the torsoin bar housings, so the sway bar is mouted parralel to the torsion
housing center line (accross the car) and also centered using your marking........try and make sense of that!!!
....and if you do, tell us how it looks at the shockie mounts then
