| [ Total Views: 615 | Total Replies: 3 | Thread Id: 70175 ] |
|
|
 72kombi
Commited Dubber
Posts: 53
Threads: 13
Registered: June 2nd, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 2nd, 2008 at 04:07 PM |
|
|
Front wheel bearing question Kombi
Hi guys, just a quick question before this weekends job. What is this easiest way to get the hub and spindle appart on a disc brake front end on a 72
bus, before pulling the old bearings? I've just ordered a Bentley via Amazon since the old Haynes is a bit sparse on some of this stuff, but a heads
up on this one before it arrives would be tops.... Thanks
|
|
|
greedy53
Bishop of Volkswagenism
Posts: 3062
Threads: 468
Registered: March 4th, 2006
Member Is Offline
Location: camden nsw 2570
Theme: UltimaBB Pro Grey
Mood: strung out
|
| posted on July 2nd, 2008 at 04:15 PM |
|
|
well just take the dust cap of thats the thing in the middel loosen the loc bolt or if you have nuts loosen remember that they are clock wise and
anticlockwise nuts but they should not be to tight and when you replace them don't over tighten
once you have the nut of a gentle tap will pop the bearing out and away you go
|
|
|
72kombi
Commited Dubber
Posts: 53
Threads: 13
Registered: June 2nd, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 2nd, 2008 at 04:25 PM |
|
|
As easy as that!!! Thanks, that should keep me busy on Sat, just didn't want to force something that wasn't meant to move.
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on July 3rd, 2008 at 02:16 PM |
|
|
remove the little circlip on the speedo drive on the dustcap left side first
|
|
|
