| [ Total Views: 4731 | Total Replies: 36 | Thread Id: 70381 ] |
| Pages: 1 2 |
|
|
 type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 12th, 2008 at 10:06 PM |
|
|
lifting a super
I just bought a 71 super for $300 this morning I couldnt say no.
how doyou lift the front of these I know theyre not as strong as the bj ones but for beach driving it should do till i get my kombi
marcel
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 12th, 2008 at 11:12 PM |
|
|
you can do it one of two ways.
- add coil spacers to the front strut assemblies
- pull the strut apart and cut off the perch and move it up.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 13th, 2008 at 09:54 AM |
|
|
Hi
If you can get hold of the top perch from a later style 2 bolt strut, they have a pointy head and will give about 1 inch lift.
I think I have some laying around I could post to you for just the postage cost or I could take them to Valla with me.
Steve
|
|
|
kroozzn63
Bishop of Volkswagenism
Posts: 3005
Threads: 317
Registered: January 31st, 2004
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Yellow
Mood: mmm coffee
|
| posted on July 13th, 2008 at 09:58 AM |
|
|
are supers any good for bajaing? i allways thought they wernt as good as link or bj
show us your gates
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 13th, 2008 at 10:03 AM |
|
|
Hi
They are much tougher than they are given credit for, you just need to use your head, I think he only wants to use it on the sand. Most WRC cars run
front struts.
Steve
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 14th, 2008 at 03:15 PM |
|
|
hi steve, pm me your address an I'll send you some money for those perches that would be great
where do I get the coil spacers brad
also I read on the sbo forum that golf rear coils will fit and are longer?
marcel
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on July 14th, 2008 at 10:43 PM |
|
|
Hi Marcel
I will have a dig around to make sure I have them and work out postage costs, and get back to you.
Steve
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 14th, 2008 at 11:59 PM |
|
|
mmm
| Quote: | Originally
posted by type82e
hi steve, pm me your address an I'll send you some money for those perches that would be great
where do I get the coil spacers brad
also I read on the sbo forum that golf rear coils will fit and are longer?
marcel
|
You can get coil spacers from Repco, pretty common item or most 4wd shops.
Most of the stuff u read on SBO will be in relation to lowering. Golf Struts are shorter than supers and are what people use to go lower.
Most supers sit pretty high in the front from stock so you may not lift them to high anyway.
That being said I am playing with some super struts at the moment and it looks like the later 2 bolt lower control arms are longer than the 3 bolt
control arms. So if you fit longer struts and some later control arms then you should be able to get a few inches of height out of the setup.
If I get real bored I will put a set in and put it on the wheel aligner to check. Usually when you lift a super they ended up with a set of front
wheels that tuck in as the lower control arms pulls the base of the strut in towards the pan which in turn increased the angle on the stub and thus
the wheel.
Building some lowered struts ATM so I can't see why you couldn't reverse the process to go up.
In relation to strength, with a race car, yep BJ and KL is stronger but how many people have you heard of busting lower BJ's on a super ? We have
quite a few Bash cars out there which are lifted supers.
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 15th, 2008 at 09:08 PM |
|
|
great info brad
I looked up the coil spacers on ebay can you get them specifically for vw's or do they have generic ones?
marcel
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 15th, 2008 at 10:38 PM |
|
|
| Quote: | Originally
posted by type82e
great info brad
I looked up the coil spacers on ebay can you get them specifically for vw's or do they have generic ones?
marcel
|
Donlt matter what they suit as long as the spring diameter matches the super which is about 125mm from memory.
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 17th, 2008 at 09:01 PM |
|
|
what size spacer should I get I was thinlking 2 inch but will that be too much?
marcel
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on July 18th, 2008 at 10:28 AM |
|
|
hey Marcel,
the later 74-75 upper spring cups like steves got are great for a 1-1.5 lift cos they dont change any suspension geometery just use ur original
bearings and mounts cos the late ones dont fit thro the hole in the body
and if thats not enoug like i said to u b4 u can raise the lower spring cup up abit, reverse of lowereing
have u seen how high that 2 tone blue fox 75Lbug near ur old place sits??
that thing makes makes me dissy
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2008 at 09:05 PM |
|
|
i adjusted the rear suspension up 1 inner spline today and notched the spring plates about 5mm but it tops out now
also the shocks are too short now.
can I clearance the spring plates more or grind down the carrier (not sure what its called)
I like the stance but do I need to take it down a little maybe?
I took some pictures and wil post when I download them
marcel
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on July 27th, 2008 at 09:44 PM |
|
|
| Quote: | Originally
posted by type82e
i adjusted the rear suspension up 1 inner spline today and notched the spring plates about 5mm but it tops out now
also the shocks are too short now.
can I clearance the spring plates more or grind down the carrier (not sure what its called)
I like the stance but do I need to take it down a little maybe?
I took some pictures and wil post when I download them
marcel
|
Nope, if you go any higher your CV's will click and explode. 5mm is about the limit and even that is getting close.
If you play with the lower strut mount look out for the tire.
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 3rd, 2008 at 07:55 PM |
|
|
I readjusted the rear yesterday one outer spline which I thought would sit a bit lower and not top out but it still does. what should I adjust it by
to give lift but not too much so that it tops out?
marcel
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 4th, 2008 at 06:55 PM |
|
|
I adjusted it again today using this table (see attachment)
7 down on the inside and 7 up on the outside which should bring it up about 4.4 cm
now I just need to lift the front as much then I can get to the bodywork
marcel
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 6th, 2008 at 03:39 PM |
|
|
heres a picture of how it looked originally
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 6th, 2008 at 03:41 PM |
|
|
and now a picture of the rear lifted hopefully it will settle a little bit at the rear. and next I'll fit the lbug strut perches to bring the front
up as well
marcel
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on August 6th, 2008 at 11:56 PM |
|
|
Hi
I posted the perches today.
Steve
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 19th, 2008 at 03:47 PM |
|
|
heres a pic of what it looks like now with the lbug perches fitted it sort of sits level now it just needs some bigger tires now not sure what size to
go 195/80/15's
or 215/80/15 ?
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on September 14th, 2008 at 02:44 PM |
|
|
are you planning on a baja kit??? do they make em for supers??
There are three types of people in this world - people who can count and people who can't....
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 14th, 2008 at 09:28 PM |
|
|
No I wasnt going to fit a baja it, unless i find one cheap
I was just going to leave it as a full sedan
they do make them thought theyre not very common
I found it very easy to raise the front just fitting the lbug perches gave itan inch of lift easily by fitting some coil spacers as well you could
get more and the fit some larger tires and it will go most places
marcel
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on September 15th, 2008 at 11:32 AM |
|
|
did you have to remove the body for any of your mods??? i have the same bug and have similar intensions and have been seraching my ass off to find
someone who can tell me exactly how to remove the body??? can you help??
There are three types of people in this world - people who can count and people who can't....
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on September 15th, 2008 at 03:00 PM |
|
|
are the perches just the top of the strut were it bolts to the body???
There are three types of people in this world - people who can count and people who can't....
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 15th, 2008 at 08:54 PM |
|
|
you dont have to remove the body at all
its not that difficult if you know what youre doing it all depends on your experience I guess
to fit the perches you just have to remove the struts, compress the spring then undo the nut at the top and then remove the old perch and fit the new
one, or the coil spacer then reassemble and fit
to adjust the rear its not that difficult if you know what youre doing
do you know anybody whose done it before?
if you were anywhere near me I'd be happy to help/ show you how to do it
other than that any vw shop should be able to do it for you
marcel
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on September 16th, 2008 at 03:44 PM |
|
|
thanks marcel, the lift is definitley on the cards now i sortta know what to do. my dad had a baja when i was real real young but it was '70 beetle
with BJ front end so he can only help me so far + plus hes away at the moment so no good at all....
i have finally found the last bolts and removed from the body but the fella who owned it before me had fitted different, wider, seats which need to be
removed before i get the body off... only thing is, the idiot has tack welded all the bolts on the seat and the rail.
what size tires can you fit on after the lift.. 31's???
does the lift change the camber at all???
cheers
luke
There are three types of people in this world - people who can count and people who can't....
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 17th, 2008 at 06:28 AM |
|
|
why are you removing the body?
you should be able to fit 31's under the rear with some wider guards not sure how your motor would pull that though I had some 29's on thre back
which wasnt too bad
not sure how big you could go under the front I was thinking 195/80/15 which would fit under the stock guard and on the stock rim I priced a federal
ms351 for $125
marcel
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on September 17th, 2008 at 07:27 AM |
|
|
i'm going to put coil spaces on my celica now :P
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on September 17th, 2008 at 10:06 AM |
|
|
im removing the body just to give the whole floor pan a check up and a once over....
i did think the 31's might be a bit too much for the old girl so maybe 29's are the go but i am going for the level look - that is - same tyres all
round, i dont really like the little tyres on the front so the biggest tyre i can get under the front, is goin on the back
what is a federal ms351???
cheers
luke
There are three types of people in this world - people who can count and people who can't....
|
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 17th, 2008 at 01:12 PM |
|
|
federal is a brand of tire and the ms351 is the offroad version they seem pretty cheap http://www.federaltyres.com.au/suv
and they come in a 195/80/15 which is the largest tire they'll fit to your standard rim
|
|
|
| Pages: 1 2 |
