Board Logo
Go To Bottom

Printable Version  
[ Total Views: 3658 | Total Replies: 11 | Thread Id: 77470 ]
Author: Subject:  type 3 wagon
Membermatt
A.k.a.: Choco
Insano Dub Head
****


Avatar


Posts: 743
Threads: 85
Registered: December 5th, 2002
Member Is Offline

Location: Mt Gambier SA
Theme: UltimaBB Pro Blue ( Default )

posted on June 28th, 2009 at 07:24 PM
type 3 wagon


i am after some info on what i should do to turn my 1970 type 3 wagon into a "cheap" off roader or rally car (if i cant sell it). I have limited funds for this project.
any info would be great
matt
Membershaihulud
Custom Title Time!
*****


No Avatar


Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on August 9th, 2009 at 11:59 AM



Hi Matt.

What you need to do is to increase the ground clearance. The front and rear suspensions in a Type 3 are adjustable, so that's not too difficult. I'm sure that there are threads here about how to do that.

Fit a strong aluminium bash plate under the engine and gearbox. Make sure that it protects the push rod tubes and the rocker covers. Cut oil drain holes in it.

If you want to, remove the body and fit a lift kit to the pan. In most states 3 inches is the legal maximum. That may need permission from you local registration office. That requires some 2x3 inch RHS, some welding and some design inventiveness on your part.

Of course, fit bigger wheels and tyres. I would not recommend light truck type off road tyres, unless you are going to bash your way across big gnarly rocks, as on road they are too hard and they don't pouch down much when you reduce tyre pressures for sand. Good quality passenger style off road tyres will give a good on/off road compromise. Generally speaking, don't make the front wheels and tyres too big or with too much offset, as you can affect the steering. Just make sure the the tyres don't interfere with the bodywork on full jounce and/or steering lock.

Legally you can only increase the offset of new wheels by 1/2 inches each side, have 6 inch wide rims and one inch bigger or smaller in diamater from stock. In WA you can have only one size difference between the front and rear tyres. In SA that may be two sizes. Check that. If you want the small front, big rear look, you could fit, say, 205 60 15s to the front and 215 75 16s to the rear and still be road legal.

To look the part, fit a nice tube steel front bumper with a set of big flood lights, maybe a winch, or a way to loop a big fat tow rope onto the front. Keep in mind that "they" are about to ban roo bars on cars, so make sure that it doesn't look too much like a roo bar, even though it will be one. Fit a very strong place to attach the tow rope to the front. To the front chassis/torsion bar tubes is best if the front bumper is not super strong.

On the rear fit a tube steel bumper that has foot rest places for helpers to bounce you out of trouble and a couple of hand holds onto the roof, or maybe a very strong roof rack. Fit a strong tow bar while you are at it. Be careful, as it will need to comply with the regulations.

If you need to remove some of the edges of the mudguards to fit the big tyres, weld a steel rod to the new edge and roll the metal over the rod to get a safe rounded edge.

I also suggest that you get a copy of Jeff Hibbard's book Baja Bugs and Buggies. It's printed by HP Books. It's full of good ideas. It will cost you $40. Your local book seller will be able to get it for you.

Good luck. Keep us informed an I am thinking of doing something similar and I'd like to see what you do.

Richard.
MemberBaja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
******


Avatar


Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content

posted on August 10th, 2009 at 08:02 AM



I wouldn't do a body lift on the type 3. Plus the engine mounts are on the body which will complicate the process somewhat. I have seen some type 3 Baja's. They normally cut the body to clear the bigger tyres, and fit 4x4 style wheel arch flares to cover the wheels.



Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... :)
www.taylorcycles.com.au - My DH MTB racing brothers shop.
Membershaihulud
Custom Title Time!
*****


No Avatar


Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on August 10th, 2009 at 08:11 AM



Thanks for that feedback Wes.

I wasn't sure if a body lift on a Type 3 was a good idea or not. Also fitting rubber 4WD wheel arch flares would be a lot easier and cheaper.

Matt.

One more suggestion. Fit steering brakes to the hand brake system. They will get you out of all sorts of trouble and are really cheap to build and fit.

Richard.
Membersgetty
Fahrvergnugen
****


Avatar


Posts: 994
Threads: 117
Registered: September 29th, 2003
Member Is Offline

Location: bendemeer nsw
Theme: UltimaBB Pro Blue ( Default )
Mood: yep

posted on September 24th, 2009 at 10:34 PM



theres a local auto elec buisness that used to race a baja type 3 wagon with a one peice fibre glass front and 2l



:)
MemberPHAT BUG
Custom Title Time!
Dave says Bini's a fool
*****


Avatar


Posts: 1698
Threads: 192
Registered: May 22nd, 2003
Member Is Offline

Location: Bendigo Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Drippin

posted on December 2nd, 2016 at 06:01 AM



Digging up an old thread, any Baja Type 3's on here??



http://www.melburgluft.com/images/banners/phatbug.jpg
Memberwombatventures
Wolfsburg Wizard
***


Avatar


Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline

Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed

posted on December 5th, 2017 at 04:52 AM



Possibly something in the pipeline... More info next week...:cool:



[size=5]DUBS BY THE RIVER2021[/size] Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!
Memberwombatventures
Wolfsburg Wizard
***


Avatar


Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline

Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed

posted on December 12th, 2017 at 06:52 AM



Not going to go totally BAJA but will make it suitable for getting to the surf.....:lol:

Error
Sorry, you must be a registered user in order to download attachments.




[size=5]DUBS BY THE RIVER2021[/size] Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!
Memberwombatventures
Wolfsburg Wizard
***


Avatar


Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline

Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed

posted on December 12th, 2017 at 06:54 AM



First job get the engine running...
Second Job cut some rust...
Third job get it registered...
Forth Job enjoy the ride! :yes:




[size=5]DUBS BY THE RIVER2021[/size] Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!
MemberBone
Officially Full-On Dubber
***


No Avatar


Posts: 299
Threads: 43
Registered: August 9th, 2009
Member Is Offline

Location: Cooroy
Theme: UltimaBB Pro Blue ( Default )

posted on December 23rd, 2017 at 06:31 AM



We had Baja's in the late 80's but my brother also had a early wagon in the early 90's he took to Fraser Island.

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.
Memberwombatventures
Wolfsburg Wizard
***


Avatar


Posts: 680
Threads: 44
Registered: February 11th, 2013
Member Is Offline

Location: Peterborough SA
Theme: UltimaBB Pro Orange
Mood: BUSted, BUGgered & NOTCHed

posted on December 25th, 2017 at 02:17 PM



That square looks cool Bone.



[size=5]DUBS BY THE RIVER2021[/size] Morgan SA - Sept 18-19 2021

Currently suffering from delusions of sanity!
MemberPHAT BUG
Custom Title Time!
Dave says Bini's a fool
*****


Avatar


Posts: 1698
Threads: 192
Registered: May 22nd, 2003
Member Is Offline

Location: Bendigo Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Drippin

posted on March 5th, 2018 at 06:28 AM



My Baja Fasty............


https://s14.postimg.org/s2a534ae5/FB_IMG_1520194925005.jpg

https://s14.postimg.org/xqgfu41wt/FB_IMG_1474707712444.jpg

https://s14.postimg.org/vyngz7q9p/FB_IMG_1474707725128.jpg


Still a way to go with it, need to sort out RGB rear end for it next.




http://www.melburgluft.com/images/banners/phatbug.jpg


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 24.9% - SQL: 75.1% ]
#Duration:Query:
1.0.00024700SELECT * FROM ubb_settings
2.0.00018287SELECT moderator FROM ubb_forums WHERE moderator != ''
3.0.00015616SELECT DISTINCT uid FROM ubb_members WHERE username = 'BUGBOY'
4.0.00013781SELECT DISTINCT uid FROM ubb_members WHERE username = 'MickH'
5.0.00014615SELECT DISTINCT uid FROM ubb_members WHERE username = 'barls'
6.0.00014591SELECT DISTINCT uid FROM ubb_members WHERE username = 'vanderaj'
7.0.00011802SELECT DISTINCT uid FROM ubb_members WHERE username = 'Cam'
8.0.00012398SELECT DISTINCT uid FROM ubb_members WHERE username = 'vw54'
9.0.00011587SELECT DISTINCT uid FROM ubb_members WHERE username = 'SuperOwen'
10.0.00011897SELECT DISTINCT uid FROM ubb_members WHERE username = 'helbus'
11.0.00012112SELECT DISTINCT uid FROM ubb_members WHERE username = '65busser'
12.0.00012422SELECT DISTINCT uid FROM ubb_members WHERE username = 'Baja Wes'
13.0.00010800SELECT DISTINCT uid FROM ubb_members WHERE username = 'Dasdubber'
14.0.00016499SELECT DISTINCT uid FROM ubb_members WHERE username = 'MISS VDUB'
15.0.00057006SELECT LENGTH(robot_string) AS strlen, robot_string, robot_fullname FROM ubb_robots ORDER BY strlen DESC
16.0.00020599SELECT f.fid, f.theme FROM ubb_forums f, ubb_threads t WHERE f.fid = t.fid AND t.tid = '77470'
17.0.00028300DELETE FROM ubb_whosonline WHERE ip = '44.197.197.23' && (username = 'xguest123' OR username = 'xrobot123' OR username = 'Anonymous') OR time < '1632850215'
18.0.00017905INSERT INTO ubb_whosonline (username, ip, time, location, invisible, robotname) VALUES ('xguest123', '44.197.197.23', LPAD('1632850815', '15', '0'), '/viewtopic.php?tid=77470', '0', '')
19.0.00014710DELETE FROM ubb_guestcount WHERE ((ipaddress = '44.197.197.23') OR (onlinetime < '1632764415'))
20.0.00009704DELETE FROM ubb_robotcount WHERE ((ipaddress = '44.197.197.23') OR (onlinetime < '1632764415'))
21.0.00009108INSERT INTO ubb_guestcount (ipaddress, onlinetime) VALUES ('44.197.197.23', '1632850815')
22.0.00015092SELECT * FROM ubb_themes WHERE themeid = '1'
23.0.00009894SELECT * FROM ubb_pluglinks ORDER BY displayorder ASC
24.0.00010705SELECT id FROM ubb_banned WHERE ((ip1 = '44' OR ip1 = '-1') AND (ip2 = '197' OR ip2 = '-1') AND (ip3 = '197' OR ip3 = '-1') AND (ip4 = '23' OR ip4 = '-1')) AND NOT (ip1 = '-1' AND ip2 = '-1' AND ip3 = '-1' AND ip4 = '-1')
25.0.00050902SELECT fid, type, name, fup, status, private, userlist, password FROM ubb_forums WHERE private != '5' AND private != '3' AND private != '2' AND userlist = '' AND password = '' AND status = 'on' ORDER BY displayorder
26.0.00014091SELECT themeid, name FROM ubb_themes
27.0.00087214SELECT name, template FROM ubb_templates WHERE name IN ('functions_bbcode', 'functions_bbcodeinsert', 'functions_smilieinsert_smilie', 'functions_smilieinsert', 'viewtopic_reply', 'viewtopic_quickreply', 'viewtopic', 'viewtopic_invalid', 'viewtopic_modoptions', 'viewtopic_newpoll', 'viewtopic_newtopic', 'viewtopic_poll_options_view', 'viewtopic_poll_options', 'viewtopic_poll_submitbutton', 'viewtopic_poll', 'viewtopic_post', 'viewtopic_post_email', 'viewtopic_post_site', 'viewtopic_post_icq', 'viewtopic_post_aim', 'viewtopic_post_msn', 'viewtopic_post_yahoo', 'viewtopic_post_search', 'viewtopic_post_profile', 'viewtopic_post_pm', 'viewtopic_post_ip', 'viewtopic_post_repquote', 'viewtopic_post_report', 'viewtopic_post_edit', 'viewtopic_post_delete', 'viewtopic_post_attachmentimage', 'viewtopic_post_attachment', 'viewtopic_post_attach_noborder', 'viewtopic_post_attimg_noborder', 'viewtopic_post_sig', 'viewtopic_post_nosig', 'viewtopic_printable', 'viewtopic_printable_row', 'viewtopic_multipage', 'viewtopic_post_attachment_none', 'viewforum_rules', 'viewtopic_post_blog', 'viewtopic_post_rpg', 'viewforum_mpn_info', 'viewtopic_next_prev_links', 'viewtopic_captcha', 'css', 'error', 'footer', 'footer_querynum', 'footer_load', 'footer_phpsql', 'footer_totaltime', 'header', 'message', 'meta_tags', 'shadow', 'shadow2')
28.0.00023484SELECT t.tid, t.fid, t.subject, t.views, t.replies, t.closed, t.topped, l.uid as lp_uid, l.username as lp_user, l.dateline as lp_dateline, l.pid as lp_pid FROM ubb_threads t LEFT JOIN ubb_lastposts l ON l.tid = t.tid WHERE t.tid = '77470'
29.0.00016499SELECT * FROM ubb_forums WHERE fid='60' AND status='on'
30.0.00013590SELECT code, url FROM ubb_smilies WHERE type = 'smiley'
31.0.00007200SELECT find, replace1 FROM ubb_words
32.0.00023007SELECT id, title, posts, stars, allowavatars, avatarrank FROM ubb_ranks
33.0.00016403UPDATE ubb_threads SET views = views+1 WHERE tid = '77470' LIMIT 1
34.0.00019407SELECT COUNT(pid) FROM ubb_posts WHERE tid = '77470'
35.0.00830102SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 77470 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline < x.dateline AND t.fid = '60' ORDER BY l.dateline DESC LIMIT 1
36.0.00542593SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 77470 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline > x.dateline AND t.fid = '60' ORDER BY l.dateline ASC LIMIT 1
37.0.00017691SELECT vote_id FROM ubb_vote_desc WHERE topic_id = '77470'
38.0.00019908SELECT pid FROM ubb_posts WHERE tid = '77470' ORDER BY pid LIMIT 0, 30
39.0.00088501SELECT * FROM ubb_attachments WHERE pid IN('721172', '728292', '728416', '728417', '737153', '1031943', '1038779', '1038846', '1038847', '1039014', '1039054', '1039670')
40.0.00079393SELECT p.*, m.*,w.time FROM ubb_posts p LEFT JOIN ubb_members m ON m.username = p.author LEFT JOIN ubb_whosonline w ON p.author = w.username WHERE p.fid = '60' AND p.tid = '77470' ORDER BY p.pid ASC LIMIT 0, 30