| [ Total Views: 2241 | Total Replies: 15 | Thread Id: 78005 ] |
|
|
 Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 24th, 2009 at 10:43 PM |
|
|
Adapterplate and flywheel
Hi.
I'm not from Aus. I'm actually from sweden.
So please dont kick me out for that, this is a really awsome forum.
So here's the interesting part.
I'm go an Industry education(gymnasium)(like high school I think)
And for my third year I've got to have a project.
Since I've allways liked Vw's I decided to go putting an Subaru EJ engine into it, and after alot of gnabbing on my teachers, we finally come to an
agreement, I was allowed to do it IF I were to build the adapterplate and flywheel myself.
Not said I have to do the blueprints but I had to fab myself.
So do anyone have any blueprints they could share?
If you sell them and think, Darn I won't give my blueprints to him,
then he'll just start produceing them and sell them too and then my bussiness will be over for ever.
Naah I wont that's a promise 
I'll only fab one set for my car and that's it.
I've asked alot of companies but they are all very negative, they dont want to help me :/
But perhaps any of you will?
And even if you dont have any blueprints then you perhaps have any ideas and tips you'd like to share with me?
Best regards
/L
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on July 24th, 2009 at 11:12 PM |
|
|
I built my own adaptor plate and flywheel, but for a V6 instead of the subaru.
Info here;
http://www.offroadvw.net/bajawes/linktoV6.htm
The blueprints and stuff are here;
http://www.offroadvw.net/bajawes/V6_baja/Cad/index.htm
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 25th, 2009 at 05:11 AM |
|
|
Thanks 
I'll look at it tomorrow
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2009 at 06:26 AM |
|
|
No one else??
In some thread I red that Seagull(I think that was his name) made these.
If you dont want to share blueprints could you give me a tip ?(A)
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on July 27th, 2009 at 07:16 AM |
|
|
give me your email address and i'll send you my drawings in autocad for the adapter plate i had laser cut which worked very well
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2009 at 08:17 AM |
|
|
91lhm@robertsfors.se
Thanks
I'll mention you in my presentation that I'll have to do in this
Infact I'll mention this entire site since it's so great
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 20th, 2009 at 04:45 AM |
|
|
Rocknrob to what tranny did you have this plate messured?
And please I need some help with your blueprint!
Are you sure about the messures? I mean the subaru boltpattern seems kinda strange to me
/L
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on October 20th, 2009 at 07:52 AM |
|
|
i used the 091 box found in late 70 bay kombi. my engine is an EJ22 and the adapter plate fits fine
[img] [/img]
[img] [/img]
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 24th, 2009 at 09:35 PM |
|
|
Ok, It was the bolt on the upper side without the startengine that according to our messures was 2mm wrong,
We messured the engine bolt pattern just to be sure, and that bolt was 2mm to far out, so I've changed that but all the rest seems fine.
I've got a 90's Ej22M and on the pic's on your engine I see some slight differences, so perhaps they moved the bolt? or maybe some this is fcked up
:P anyways 1 bolt hole can allways be re-drilled since all the others were ok!
Btw I see you have turned the intake around, is it just to remove it and turn it a 180 degrees (except the injection thingie cables and the
ignition)
Btw what clutch do you use?
Is that the subaru clutch? or the vw Clutch?
/L
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 24th, 2009 at 09:36 PM |
|
|
And the flywheel how did you do that??
I'm thinking about useing the original Vw flywheel but makeing sort of a distance/adapter between them
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 25th, 2009 at 12:12 AM |
|
|
sweep the floor
Looking for that special lady : PM me for coffee & cake
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on October 25th, 2009 at 07:08 AM |
|
|
yes i turned the intake manifold around becos in the van the throttlebody would interfere and also the water manifold needs to face forward anyway.
i used the VW 228mm clutch to suit the gearbox. my flywheel is locally produced. there will be plenty of suppliers for flywheels in europe or you
could use the subaru flywheel and clutch and an adapter bellhousing...these are available in the UK i believe
good luck
|
|
|
rocknrob
A.k.a.: Rob
Insano Dub Head
Posts: 844
Threads: 90
Registered: December 18th, 2003
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Black
Mood: mystic
|
| posted on October 25th, 2009 at 07:09 AM |
|
|
neil i use a shovel not a broom
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 27th, 2009 at 07:16 PM |
|
|
Ok, I'll stick with my Vw flywheel and clutch for now, and build an distance between the flywheel and the subaru
I'll post my blueprints when I've got them all done
/L
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 2nd, 2009 at 01:55 AM |
|
|
Do you have a blueprint of the flywheel or something, bcuz I'm not going to buy neither the a-plate nor the flywheel I have to fab both of them and
just modifying and makeing two distances etc etc. will make it way to weak, so there for I'm looking at perhaps getting a type4 wheel and clutch, but
before that I need to know how they look, or perhaps copy yours.
Regards/L
|
|
|
Wcfluff
Learner Dubber
Posts: 12
Threads: 2
Registered: July 24th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 2nd, 2009 at 01:57 AM |
|
|
Baja ves, the flywheels on your site are they from a type4 or a type2
/L
|
|
|
