| [ Total Views: 1666 | Total Replies: 37 | Thread Id: 78033 ] |
| Pages: 1 2 |
|
|
 baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on July 26th, 2009 at 07:40 PM |
|
|
THE USUAL!
gday guys
im sure you have seen this whinge topic almost 11000 times, but its really frustrating me..
ENGINE NOT STARTING!!!!
this is my first rebuild and im really wanting it to go well but its not
ok. i have a great spark to all plugs, i have it timed to 7.5deg btdc, new plugs, new leads, twin 40idfs, getting fuel, NOT STARTING!!!!
it turns over great but not even a tidder from the exhaust..
PLEASE TELL ME WHATS WRONG!!
even if it happens once in every billion engines its probly happened to me so give us a list of things to quadruple check
cheers
luke
There are three types of people in this world - people who can count and people who can't....
|
|
|
eraser
Fahrvergnugen
Posts: 970
Threads: 128
Registered: March 11th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Powder
|
| posted on July 26th, 2009 at 08:43 PM |
|
|
are the plugs going to the right cylinder?
Have you tried the good old fuel down the throat of the carbi? to ensure fuel is actually getting to them?
|
|
|
greedy53
Bishop of Volkswagenism
Posts: 3062
Threads: 468
Registered: March 4th, 2006
Member Is Offline
Location: camden nsw 2570
Theme: UltimaBB Pro Grey
Mood: strung out
|
| posted on July 26th, 2009 at 09:06 PM |
|
|
thats good advice a small amount of petrol down the carby than push the go pedal to the floor and turn the key,and you can cross over 2 spark leads
and try to get a back fire
good
|
|
|
Sides
A.k.a.: Dave Sidery
Veteran Volks Folk
Posts: 2220
Threads: 59
Registered: May 20th, 2007
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Need... more... shed... time...
|
| posted on July 26th, 2009 at 11:07 PM |
|
|
Yeah, check plug leads and also that rotor points to #1 when at TDC - I've seen brand new dizzy's come assembled with the drive key at the bottom
put round the wrong way.
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners |
|
|
vwsteve
A.k.a.: steve
Veteran Volks Folk
karmann crazy
Posts: 2087
Threads: 200
Registered: July 25th, 2006
Member Is Offline
Location: Redcliffe QLD
Theme: UltimaBB Pro Navy
Mood: Busy!
|
| posted on July 27th, 2009 at 06:31 AM |
|
|
.
make sure the points gap is set right too
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2009 at 08:22 AM |
|
|
So there is no pop, fart, wheeze, cough from the motor???
Nothing??
Futue te ipsum!!!
|
|
|
jamsha71
Slammed & Awesome Dubber
Posts: 88
Threads: 28
Registered: October 13th, 2008
Member Is Offline
Location: Western Suburbs, Brisbane
Theme: UltimaBB Pro Black
|
| posted on July 27th, 2009 at 11:21 AM |
|
|
Failing to get even a little cough does seem a little unusual! Luckily it probably is something really simple that's wrong.
I'm assuming that you've had the plugs out (and earthed) and seen the spark while the engine is being turned over. And I'm also assuming that the
plugs are wet when you have taken them out.
My guess is that this can only be a matter of the timing being out (as in Sides' post), or that the leads are going to the wrong plugs. Check that
your firing order is 1-4-3-2.
76 Kombi (current)
75 Kombi
71 Beetle
69 Beetle
69 Beetle
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2009 at 11:25 AM |
|
|
If leads were wrong surley you would be getting coughing and popping etc etc
You SURE your are getting spark??
Futue te ipsum!!!
|
|
|
Bookwus
Seriously Crusin Dubber
Posts: 120
Threads: 5
Registered: August 30th, 2007
Member Is Offline
Location: City of Roses
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2009 at 12:02 PM |
|
|
Hiya baja,
It's really pretty easy to get the wiring all screwed up. Most of us have gone down this road before, I know I'm a veteran. It's been suggested
that you check the plug wires - it is a common mistake to get them 180* out. That MIGHT be the problem although, as others have mentioned, I'd think
you'd get a cough or a hiccup at the least if this were the case.
Another wiring foul-up can result in nothing but the engine turning over endlessly until the battery wears out. That is wiring up the coil in
reverse. In other words, check to make sure that your condenser is hooked up to the negative pole on the coil - and the hot pole is hooked up
properly.
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on July 27th, 2009 at 02:50 PM |
|
|
yer i have set the points gap to 16 thou (i think. this number rings a bell but im sure i set correctly)
im PRETTY sure that the leads are all set up properly. ive had the 1 and 2 plugs out and earthed and both give a good spark. both were wet when taken
out.
there is definitely no popping, farting, wheezing whatsoever. just the starter motor goin to town on it.
i'll give it some fuel down the carbies this arvo, see how it goes.
keep the ideas comin though
cheers
Luke
There are three types of people in this world - people who can count and people who can't....
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on July 27th, 2009 at 03:21 PM |
|
|
PM sent or call me on 0423775037
|
|
|
ancientbugger
Custom Title Time!
Posts: 1986
Threads: 191
Registered: March 24th, 2004
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Yellow
|
| posted on July 27th, 2009 at 05:10 PM |
|
|
You've checked the spark to the plugs but did you pull out a plug and check it was sparking? Again if you've got a sticky needle valve in your carb
you could be flooding the engine and soaking the plugs.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on July 27th, 2009 at 06:31 PM |
|
|
if the plugs were wet and sparked when u earthed them id bet a left nut its the leads in wrong order
if not u would atleast get a whimper or nice bang from it occasionally
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on July 28th, 2009 at 06:31 PM |
|
|
we have popping and farting!!!
i went down the sarvy and squirted some carby cleaner down the throats (most flammable stuff i could squirt) and it just seemed as though it was
firing off the carby cleaner only and no fuel was getting to it...
leads were in correct order... i'll take postage on the nut joel. haha
so i believe there may be some blockage in the fuel delivery somewhere...
sounded so good to hear her first words!!!
There are three types of people in this world - people who can count and people who can't....
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2009 at 07:58 PM |
|
|
Do you have any pics of how you have them set up? Are they the carbies you bought from me? Did you fix the airleak?
Mick.
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on July 28th, 2009 at 08:36 PM |
|
|
g'day mick.
they are the ones i got from you... i have looked into putting photos on here and fail at it. was hoping to get the thing started to diagnose the
airleak and fix it from there. you rekkon this is my problem??
There are three types of people in this world - people who can count and people who can't....
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on July 28th, 2009 at 08:44 PM |
|
|
are the bowls filling with fuel?
if there dry try filling them up and cranking it see if it kicks
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on July 29th, 2009 at 12:27 AM |
|
|
I had my engine sitting in the carport for a few months while I had the car re-sprayed. The fuel pipes to the Kadrons were removed and sitting with
it. When I re-fitted it all, I couldn't get fuel through to either carb. After MUCH frustration, I found out it was mud wasps nests in the fuel
pipes. What a bugger.
From your ole' mate Jeff
|
|
|
Anthiron
A.k.a.: Nicko McKay
Compulsive Aussie Vee Dubber
The Baja Rejuvenation Begins
Posts: 4936
Threads: 310
Registered: October 1st, 2003
Member Is Offline
Location: Buderim QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Hell hath no fury like a womans scorn for sega.
|
| posted on July 29th, 2009 at 12:51 AM |
|
|
have u got fuel in the fuel bowls? with dry carbys i usually either take the top off the bowl and fill them up and then reassemble or take out the oil
power wire and crank the engine for a while to get the bowls full of fuel from the mechanical pump and then reconnect and try to start.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 29th, 2009 at 04:51 PM |
|
|
I don't think the airleak will be your problem. I was just wondering how you have them set up thats all.... Are you running fuel line from the pump,
into right carby then from right carby into left? i never had any starting issues with those carbies so i don't know what it could be... i don't
think i ever had a blocked jet either. I did have my fair share of jetting issues but no major problems. keep me updated on how you go and if you
don't have it sorted by next weekend i might be able to shoot up there and have a look. I'm sure we'll be able to figure it out.
Mick.
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on July 29th, 2009 at 06:48 PM |
|
|
yer ive got the line coming out of the pump to the right carb then out of right into back of left...
Im getting fuel into the right carb but dont know how far it goes after that. i didnt get to it today so i'll check bowls tomoro arvo.
geez its hard to prioritise school over volksies!!
There are three types of people in this world - people who can count and people who can't....
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 29th, 2009 at 08:22 PM |
|
|
Yeah thats how it should be, keep us updated.
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on July 30th, 2009 at 11:59 AM |
|
|
I'll pop around tomorrow arvo.
Give me a call on 0423775037 when you get home.
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on August 2nd, 2009 at 06:47 PM |
|
|
ITS GOING!!!! turns out all was fine except for a small fuel problem...
dad put kero in the fuel drum when he ran out of room and APPARENTLY vws dont run on kero.
so we ran it off a coke bottle fuel tank and she purred very nicely!!
thanks to everyone for your help especially stanley for your help!
cheers
luke
There are three types of people in this world - people who can count and people who can't....
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on August 3rd, 2009 at 07:11 AM |
|
|
Well he's a very bad dad
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 3rd, 2009 at 05:55 PM |
|
|
HA! kero! Thats a good one... so when are you gonna chuck some pics on here??
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on August 3rd, 2009 at 08:19 PM |
|
|
yer i drained out the tank and lines the sarvy and had it running half decent. still backfiring like a dog though! does a muffler stop it with the
added back pressure??
i'll try again some time soon with the piccies but as i said i failed last time so dont hold ya breath
There are three types of people in this world - people who can count and people who can't....
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 3rd, 2009 at 08:28 PM |
|
|
Are you running with no exhaust at the moment? As i said when i sold you the carbies they will more than likely need to be re-jetted to suit your
engine. I was running them on a 1916 with stock valves and a mild cam, what are you running them on? they could be running mega rich as they were when
i first put them on my engine .It did the same thing back firing and carrying on. you will need to get that air leak looked at too if you want them to
run properly.
|
|
|
baja burley
Officially Full-On Dubber
Posts: 325
Threads: 54
Registered: September 11th, 2008
Member Is Offline
Location: ipswich, QLD
Theme: UltimaBB Psyche Grey
|
| posted on August 4th, 2009 at 03:56 PM |
|
|
i have extractors on it atm but no muffler.. ive got a baja 4-1 with hotdog waiting to go on when i finish painting them.
the engine is a stocko 1600 except for the carbies and zorst, so i'll have to get em jetted down... can anyone recommend a good size for my setup??
carbs are 40idf
found an oil leak yesterday aswell... it was flowing out of the base of the cooler
so shroud came off today and its gettin done tonight.
There are three types of people in this world - people who can count and people who can't....
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 4th, 2009 at 05:26 PM |
|
|
The best thing you could possibly do is get the air leak sorted out and then take the car with the engine in it to leons motors and get them to dyno
tune it. That way you will know exactly how it is running, It will all be on a computer screen in front of you. I put my car on the dyno when i put
the kads on and have never looked back. It might cost a few hundred but in the long run its worth it. In total i spent around 2 grand getting those
carbs set up on my engine simply because i took it to the wrong people in the first place and got screwed around. If you get it done right the first
time you will be a very happy man!
|
|
|
| Pages: 1 2 |
