| [ Total Views: 8116 | Total Replies: 50 | Thread Id: 78247 ] |
| Pages: 1 2 |
|
|
 djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 6th, 2009 at 12:59 PM |
|
|
Stinky Girl audio thread..ongoing!
Thought i'd start a thread with my audio project.
Having not worked with fibreglass before i'm quite pleased with how these front kick panels are turning out.
They didn't have to be too spot on as they are being covered with speaker cloth and carpet.
As i don't need them to be removable im going to glass / seal them into place.
Top hole is for the tweeter, large one for the 6" and the other smaller hole is the port.
I realise that having the tweeter at a different angle isn't technically a good thing to be doing, but i'd rather have it towards my ears than legs!
Due to space with the foot pedals it's really hard to get the larger speaker pointing towards your ears...so you have to compromise i guess!
Will post more as i go!
|
|
|
modulus
A.k.a.: Peter Hill
Veteran Volks Folk
Posts: 2009
Threads: 76
Registered: July 1st, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro White
Mood: modular
|
| posted on August 6th, 2009 at 04:54 PM |
|
|
| Quote: | Originally
posted by djnee
I realise that having the tweeter at a different angle isn't technically a good thing to be doing, but i'd rather have it towards my ears than legs!
Due to space with the foot pedals it's really hard to get the larger speaker pointing towards your ears...so you have to compromise i guess!
|
As higher frequencies are realtively directional and lower frequencies are relatively not, there is very little compromise there; you will get good
tweeter sound and not lose out on the bass notes.
hth
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 7th, 2009 at 01:43 PM |
|
|
My dear wife won't let me at any of the gear until my Birthday in September (grumble, grumble!!!!) so i'm sorting all the boring background stuff
out in the meantime so that when i get it i can drop it all in without too much bother.
Unfortunately, car audio won't work without cables...and i hate cables!!!
I decided to trunk the cables through some hosepipe which will run via the heater channels on both sides to keep them out of the way. The heaters
aren't connected on this car anyway...
Getting the hosepipe down around the 90 degree bend at the bottom of the A panel was proving impossible, so i decided to exit through one of the
inspection holes and then continue though the heater channel to the rear. Probably a good thing as my front speaker cables will need to exit here
anyway.
Cables will exit under the back seat on both sides. Ideal 
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 7th, 2009 at 04:52 PM |
|
|
Just offered the speakers up to make sure there's enough clearance behind.. (ok...i lied, i just wanted to see what it looked like...lol)
Gave them a coat of paint just in case the speaker cloth i use is slightly see-through.
|
|
|
trickysimon
A.k.a.: Simon Azzopardi
Custom Title Time!
100km/h is only 9 seconds away
Posts: 1473
Threads: 43
Registered: December 15th, 2007
Member Is Offline
Location: Wagga Wagga
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 7th, 2009 at 05:22 PM |
|
|
That's excellent for your first go at fibreglassing
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 7th, 2009 at 10:38 PM |
|
|
trust me carpet hides everything 
ive still got audio cables everywhere through mine now but its not half as bad now as it was when i had bigger systems
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 14th, 2009 at 03:54 PM |
|
|
| Quote: | Originally
posted by trickysimon
That's excellent for your first go at fibreglassing
|
Thanks Simon / Joel It's been good fun too...enjoyed it!
Ok, front speakers in and carpet stuck down!
Just gotta trim around the tweeters a bit to neaten them up and i'm done.
Passenger side..
Drivers side...
|
|
|
trickysimon
A.k.a.: Simon Azzopardi
Custom Title Time!
100km/h is only 9 seconds away
Posts: 1473
Threads: 43
Registered: December 15th, 2007
Member Is Offline
Location: Wagga Wagga
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 14th, 2009 at 07:13 PM |
|
|
Now you can make some up for me 
|
|
|
colonel mustard
Son of Jim - Creator of Good
Posts: 2829
Threads: 51
Registered: February 27th, 2009
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on August 14th, 2009 at 11:58 PM |
|
|
Looks reaaaally good dude. love it.
|
|
|
eraser
Fahrvergnugen
Posts: 970
Threads: 128
Registered: March 11th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Powder
|
| posted on August 15th, 2009 at 09:54 AM |
|
|
Very nice
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 15th, 2009 at 05:48 PM |
|
|
Thanks guys
Quite pleased with how it's all going so far!
Just started taking everything out behind the rear seat now in preparation for the sub going in. Given it a coat of sound deadener to start with, then
will line with some rubber to dampen it down further.
|
|
|
eraser
Fahrvergnugen
Posts: 970
Threads: 128
Registered: March 11th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Powder
|
| posted on August 15th, 2009 at 06:59 PM |
|
|
take lots of pics.. :P love a good blow by blow of peoples ideas and systems.
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 16th, 2009 at 03:13 PM |
|
|
Had a few hours spare on a Sunday afternoon, so i did a bit more...
Took the carpets out from the gap behind the rear seat to sound deaden it a bit. Basically there was just thin carpet there before, and i want to keep
the sound in / engine noise out as much as possible.
On the bare metal i painted a nice thick coat of body deadener and then coated in foil to keep the mess locked away! Then i got a couple of thick foam
camping mats from Rays Outdoors ($7 each) and glued them on top.
Mats in place....hush engine!
Then finally glued the carpet on top of it all.
I won't know how easily the sub is going to fit until i have it in the car. I know it's pretty tight already...but im sure with some jiggling around
it will be fine!
It's deffo a lot quieter inside than it was!
I plan to give the insides of the doors (and most places i can get to) the camping mat treatment..
|
|
|
colonel mustard
Son of Jim - Creator of Good
Posts: 2829
Threads: 51
Registered: February 27th, 2009
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on August 16th, 2009 at 03:23 PM |
|
|
camping mat would kill alot of the noise, and proably feel better than carpet straight on metal...
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 20th, 2009 at 08:41 PM |
|
|
Finished the box that will house the Kenwood 12" sub. Measurements had to be exact so that the internal capacity was dead on 1.25cuft. It's a pretty
snug fit once the seat is in place!
To secure it in place i will be using ratchet straps that will go down through the floor, underneath the car and back up through the floor on the
opposite side.
Made a start on the rear MDF shelf that will house the Pioneer 6's. The speakers will be recessed into the shelf so that it's flush, and will cover
with speaker cloth.
The tweeters will be freestanding on top in each corner.
|
|
|
colonel mustard
Son of Jim - Creator of Good
Posts: 2829
Threads: 51
Registered: February 27th, 2009
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on August 20th, 2009 at 08:54 PM |
|
|
| Quote: | Originally
posted by djnee
To secure it in place i will be using ratchet straps that will go down through the floor, underneath the car and back up through the floor on the
opposite side.
|
Hold up hold up!!! your cutting holes in the floor.... to secure a box, with ratchet straps?? Serious?... No offence, but why??? couldnt you just use
4 bolts with large washers on each side.and wing nut inside the box.... then it would be pretty hard to seal....... wouldn't cut the straps ...
wouldn't leave massive slits in the floor... and those ratchet tie downs will rattle heaps...
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 20th, 2009 at 09:03 PM |
|
|
i gotta agree with mustard, thats so over complicating things and cutting precious early metal you will regret in years to come
i've lost track of how many enclosures ive built for mine over the years but my very first one was almost identical to yours
but with most of them all i do to keep them firmly in place is on the bottoms fit some of those wood thread insert things like these:
and them put bolts from underneath up thro the parcel tray floor into them
has passed pinkslip brake tests with 4 wheel discs and never budged
|
|
|
trickysimon
A.k.a.: Simon Azzopardi
Custom Title Time!
100km/h is only 9 seconds away
Posts: 1473
Threads: 43
Registered: December 15th, 2007
Member Is Offline
Location: Wagga Wagga
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 20th, 2009 at 09:07 PM |
|
|
Don't know whats wrong with you guys. The only thing holding my sub box and shelf in is the back seat and its never budged
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 20th, 2009 at 09:09 PM |
|
|
i used to do that till that one time the seat just wasnt quite clipped into place
plus 6 volt bugs dont have a backrest locking system like fat chicks do
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 21st, 2009 at 10:07 AM |
|
|
Have chosen to opt for 4 bolts instead! Still going through the floor, but less drastic!
The reason for doing the straps....
Back in the early 90's i met a guy who had a bass tube in his bug. It was only an 8" speaker, but his was installed professionally and they strapped
it through the floor and around the chassis....and it was the craziest bass i'd ever heard, especially from such a small speaker.
But yeah, im going with the bolts now anyway!
With the car not having the backrest lock like Joel stated, plus with my 2 kids sitting there, the least thing i want is anything that heavy shifting
forwards should we hit something.
|
|
|
Midlife crisis
Veteran Volks Folk
Nartispuddlejumper, Bureau of Toxicity
Posts: 2282
Threads: 160
Registered: May 17th, 2003
Member Is Offline
Location: Logan city south of Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Wornout and Toxic
|
| posted on August 21st, 2009 at 11:57 AM |
|
|
Now that is a great job , well done
Marc
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 21st, 2009 at 01:35 PM |
|
|
Many thanks Marc Starting to feel like i'm getting somewhere now!
Ok....bit of an update today.....and typically i chose the only day of really heavy rain in months to be climbing underneath the car..lol
Drilled 4 holes to fix the sub in place and ran bolts to the underside of the car. Made sure everything is sealed with silicone sealer.
View from underneath the car. I made some rubber gaskets and used lashings of silicone sealer to prevent rattles and to keep it all watertight.
Mounted the speakers and crossovers, soldered everything up and coated it in grey grill cloth.
Before fixing the shelf onto the top of the sub box i applied lashings of silicone sealer to prevent any rattles.
Shelf bolted to sub box....Getting there!
Rear end finished and tweeters mounted in each corner....good to go!
Now to mount some amps....
|
|
|
Mick058
Custom Title Time!
Posts: 1580
Threads: 109
Registered: January 29th, 2008
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 21st, 2009 at 01:49 PM |
|
|
well done mate, looking really good
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 21st, 2009 at 03:05 PM |
|
|
Under the bonnet was never going to be anything amazing...just wanted it to function really!
Cut a piece of mdf for the amps to mount onto and covered it with some black material...keeps the wires out of sight, that's the main plan here
The Kenwood 500W 4 channel amp i managed to grab off Ebay for $40 which i'm pretty stoked about! Many thanks to STIDUB for collecting it for me up in
Bris and posting down to Geelong... (the ebay guy was trying to wriggle out of the sale saying the listing was meant to be collection only).
Just awaiting the 600W mono amp for the sub and i can start hooking stuff up
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 21st, 2009 at 06:50 PM |
|
|
looking good
just make sure your power terminals on the amp are well covered
trust me theres nothing like sitting in peak hour traffic when burning smell comes through all the holes in the dash cos a piece of metal luggage in
the boot has decided to sit across the terminals.....
i now mount my amps under the front seats 
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on August 25th, 2009 at 07:58 PM |
|
|
Original plan was to make something to house the head unit underneath the dash, but after trying a few ideas i decided it looked too bulky...
Saw a thread (on here i think?) where someone made a panel to sit inside the glovebox, so i went for that instead.
I made a wooden panel to sit a couple of inches inside the glovebox and glued it in place.
As the glovebox is essentially made from cardboard, i gave it a coat of fibreglass to strengthen it all up a bit.
Once the fibreglass was dry i then filled up the edges and smoothed it all out.
Finished it off with some white paint and refitted into the car.
Another job sorted...
|
|
|
Scarab
Wolfsburg Wizard
Posts: 646
Threads: 8
Registered: July 26th, 2009
Member Is Offline
Location: Brahma Lodge,South Australia
Theme: UltimaBB Pro Blue
|
| posted on September 7th, 2009 at 06:24 PM |
|
|
Thats some nice work there mate....you'll be pumping tunes in no time!!
Love the glovebox enclosure....I'll be stealing that idea for my Notch I think! 
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on September 8th, 2009 at 01:20 PM |
|
|
Thanks Scarab!
OK....drum roll.....haha
Finally finished!
Kenwood sub fitted! Good old silicone sealer was used to seal the speaker into the cabinet.
Amp for the sub mounted and wired up and all fixed into place.
Will make a cover of some sort for it at some point.
Finally finished! Yey! It's been fun to do, and sounds awesome!
|
|
|
djnee
Officially Full-On Dubber
Posts: 341
Threads: 59
Registered: March 23rd, 2009
Member Is Offline
Location: Lara, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: going lower...
|
| posted on September 30th, 2009 at 07:40 PM |
|
|
Well...
my wife made the fatal mistake of saying that she hadn't got a clue what to get me for Christmas this year, so today i went outside and mocked up a
rough design for another 10" sub mounted beneath the rear seat...
The speaker in the pic is for template purposes only...just wanted to get an idea as to how well it's going to fit.
I intend for the final design to be a sealed box made from fibreglass and 18mm mdf.
Watch this space!
|
|
|
colonel mustard
Son of Jim - Creator of Good
Posts: 2829
Threads: 51
Registered: February 27th, 2009
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on September 30th, 2009 at 07:57 PM |
|
|
Thats where i keep my tools/jack/wheel brace/spare parts..... good spot
if your not using it.
|
|
|
| Pages: 1 2 |
