Posts: 370
Threads: 71
Registered: August 28th, 2002
Member Is Offline
Location: Geelong
Theme: UltimaBB Pro Blue ( Default )
Mood: Low
posted on August 29th, 2009 at 04:09 PM
Can someone confirm for me..?
Is this the small plastic part that goes at the base of the the rear legs on a type 1 1976 fronts seats, inside the runners.
Part number on it is 171.881.213
I can't remember if this is where it came from, the seats are rocking around, and I was told there should be a small plastic bit to go in there to
stop them rocking around.
Should there be two for each seat? I can only find one piece, so I've lost 3 of them??
If this is right, has anyone got some of these they could part with?
Error
Sorry, you must be a registered user in order to download attachments.
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
posted on August 29th, 2009 at 04:19 PM
ClassicVW at Rydalmere Sydney (forum sponsor) sells them................if you dont have any luck i have some
Posts: 792
Threads: 330
Registered: April 21st, 2005
Member Is Offline
Location: Kembla Grange, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: GETTING FASTER
posted on August 29th, 2009 at 05:15 PM
Kafer , I have a bucket load of these new parts as well as the front slider . You will need 2 for the rear on each seat which should be lubricated
with a thin smeer of grease . If you do not use these sliders your seats will rock and feel loose . Also make sure that the rear channels on the floor
are clean from and rust or debris , ROD , 02-42729920 .
More boost + More fuel = More power
1968 Beetle fastest run 8.96 sec @ 161 mph 4th Nov. 2001
2010 New Beetle 8.12 sec on 8th march 2014 http://www.rodpenroseracing.com.au
