Subject: WTB: Carb linkage kit (type 3 twin for type 1) + Engine Tinware
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on September 19th, 2009 at 05:34 PM
WTB: Carb linkage kit (type 3 twin for type 1) + Engine Tinware
I have type 3 twin carbs and manifolds. I'm after some form of linkage kit that will take a type 1 accelerator cable and run these type 3 carbs.
Any got any? any idea where to get?
And am after 1600 twin port engine tin. the stuff that covers the barrels/cylinders. Not hte fan shroud.
Thanks,
Chris.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
grumble
Son of Jim - Creator of Good
Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
posted on September 19th, 2009 at 06:00 PM
I used to run a shortened type 3 pivot in conjunction with modified linkages in my old oval,I lifted the carbies up by using about 3 FC holden carbie
spacers,this gave me clearance and also allowed the fitment of air filters.
