| [ Total Views: 902 | Total Replies: 4 | Thread Id: 79224 ] |
|
|
 bus914
Custom Title Time!
Posts: 1230
Threads: 233
Registered: August 29th, 2002
Member Is Offline
Location: Central Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: Could be worse
|
 posted on September 22nd, 2009 at 09:13 PM |
|
|
Would 195s or 205s fit under an IRS type 3 on 35ET wheels?
?
|
|
|
izac
Wolfsburg Wizard
Posts: 508
Threads: 39
Registered: June 7th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Powder
|
| posted on September 22nd, 2009 at 09:28 PM |
|
|
how wide are the wheels? and is is it lowered?
|
|
|
bitemeoz
Officially Full-On Dubber
Posts: 355
Threads: 38
Registered: October 13th, 2003
Member Is Offline
Location: The Hills, Sydney
Theme: UltimaBB Vintage
Mood: Antsy
|
| posted on September 23rd, 2009 at 06:53 AM |
|
|
i had 205/60's on the back of my notchback when i bought, it was lowered and didnt scrub. ive got 185/45's now its a little lower and runs fine.
|
|
|
bus914
Custom Title Time!
Posts: 1230
Threads: 233
Registered: August 29th, 2002
Member Is Offline
Location: Central Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: Could be worse
|
| posted on September 23rd, 2009 at 08:00 PM |
|
|
Yeah his car is lowered a little. The rims are 7in.
I used this website to calculate it: http://www.bigcustomwheels.com/rt_specs.jsp
Looks like they will fit better than the 25ET Mangels with 185s that are currently on it.
Cheers
|
|
|
Kai4130
Casual Dubber
Posts: 23
Threads: 2
Registered: October 8th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue
|
 posted on September 28th, 2009 at 04:59 AM |
|
|
Dunno if its any help but I've squeezed a set of 205 40 17 under my notch and they fit under there no problem. I'm running coil overs without
torsion bars on mine and I get full unhinderd movement out of it.
But....
I'm running Porsche 944 disc's alround on mine, the wheel is 17", 7.5j wide and I think they are ET 53.
I think that the porsche brakes make the track slightly wider then stock plus I had to use a 6mm spacers to clear my uniball joints I've fitted.
With the spacer the tyre is almost touching the inside of the stock rear wing but without them they cleared fine before I ditched the torsion bars
But my car isn't a pan scrapper.... its a Scooby sump scraper now 
|
|
|
