| [ Total Views: 1496 | Total Replies: 5 | Thread Id: 81635 ] |
|
|
 glencsiro
Slammed & Awesome Dubber
Posts: 96
Threads: 22
Registered: May 11th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 26th, 2010 at 05:09 PM |
|
|
Sheet steel types and thicknesses
Afternoon all and a good Australia day to you all.
I was wondering if anyone can pass on any tips to sheet metal types (hot rolled, cold rolled, gal dipped etc...) and thicknesses relevant to
Beetles.
So far I've measured just over 1mm and 1.2mm depending where on the car I'm working on.
Now I've managed to do an ok job teaching myself too weld with an Oxy, Arc, Mig and Tig but before I start ordering and adding new sheet into my
current project I'd love to get opinions and any professional advice.
I'm still teaching myself English wheel, plainishing hammer and other body work skills but I'd love help from others if they have to time to write
and pass on their skills.
Thanks in advance.
Glen
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on January 26th, 2010 at 06:04 PM |
|
|
Cold rolled CA3 is a good material to use in forming panels by hand. 1.0mm uncoated.
The skills only come with time, experience and patience, and after 20 years making car bodies and panels in steel and aluminium, I am still learning.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on January 26th, 2010 at 07:21 PM |
|
|
Most of the panel steel that you will need will be .9 cold rolled. This can be worked easily, and will not work-harden too much in the wheeling
machine. No trouble with welding, shrinking etc. Have fun - I've been working with this stuff for over 50 years now, and still enjoy it!
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
FROSTY
Insano Dub Head
Posts: 744
Threads: 65
Registered: May 11th, 2009
Member Is Offline
Location: Palm Beach Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 31st, 2010 at 07:47 AM |
|
|
The other one is zinceneil ( not sure of spelling) it comes in 0.6 0.75 0.9 1.2 mm thickness sheets of 2400x 1200 and costs round $80 and up. It has a
zinc coating that won't rust just sitting round, also the zinc is very easy to get off before priming.
Good luck with the repairs
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on January 31st, 2010 at 12:24 PM |
|
|
Zincanneal is hot-dipped, and not suitable for welding. You may be thinking of Zincseal, which is an electo-coated steel, and is much easier to weld -
including spot weld.
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
FROSTY
Insano Dub Head
Posts: 744
Threads: 65
Registered: May 11th, 2009
Member Is Offline
Location: Palm Beach Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 31st, 2010 at 02:19 PM |
|
|
that must be the one, thanks greg
|
|
|
