Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1193 | Total Replies: 6 | Thread Id: 82421 ]
Author: Subject:  Dells
Membertar76
Custom Title Time!
*****


Avatar


Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline

Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective

posted on March 8th, 2010 at 04:07 PM
Dells


Ok i've got twin dells on my panel and i am having probs with it ideling seems to choke up all the time if the idle is adjusted lower and if i leave the idle high (1000-1100) it runs good but on shut down it lets out a huge bang about 2 sec later. I've taken it to a couple of places and they seem to going round in circles. So where is a good place to take my bus and have the carbies tuned and will know what they are on about in the Brisy area. I'm thinking i may have to get it done on a dyno.



"Obey your Dreams"!


62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
Member71EJVan
Officially Full-On Dubber
***


Avatar


Posts: 352
Threads: 23
Registered: August 19th, 2005
Member Is Offline

Location: Central Coast NSW, Australia
Theme: UltimaBB Pro White

posted on March 8th, 2010 at 06:30 PM



get yourself the dellorto cookbook. Last one I bought was $13 on ebay. Great book for setting them up properly. Carburetor supply company for jets also.



A VW for everyone!!

1972 1302 German Look
1971 Bay Panel with Subaru EJ20T
1970 Type 3 squareback in progress
1971 Type 3 notchback in progress
http://i6.photobucket.com/albums/y208/GL1972/GL1972F3DKbanner.jpg
Memberchoppa
Seriously Crusin Dubber
**


Avatar


Posts: 190
Threads: 42
Registered: October 14th, 2002
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: Itchy

posted on March 10th, 2010 at 02:30 PM



I can vouch that Dellorto book has got some good info in it.
Ive got some similar issues with my 40s on my bus.
There may be some info on shoptalk forums.
Are u running a fuel pressure control and a good fillter.
Ive got mine set at 2.5 lbs.
Are your needle/seats good? Maybe your idles are too big.

M
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on March 10th, 2010 at 02:44 PM



Dell book is good, or ring me while you have 5 min and the engine running & I'll talk you through getting it right.

You'll need a small screw driver and 7, 8, 9, 10, 11mm and maybe a 3/8 open ended spanners, all depending what linkage you have




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
Member72TWINCAB
Fahrvergnugen
****


Avatar


Posts: 978
Threads: 42
Registered: February 25th, 2003
Member Is Offline

Location: Redcliffe Qld
Theme: UltimaBB Pro Blue ( Default )
Mood: YOOTTED

posted on March 10th, 2010 at 03:39 PM



i ran twin dells on my Dual Cab for years and they were nothing but trouble. I spent so much money keeping them running. When they were set up fine they were great, but that wasn't too often. Unless you know how to keep them tuned yourself you will always have your hand in your pocket.

I switched back to standard twin carbs about 4-5 years ago and have not had to worry about them at all. Best thing I did was go back to standard carbies.




http://members.optusnet.com.au/~kombiute/mypic7.JPGhttp://members.optusnet.com.au/~kombiute/mypic8.gif
Membertar76
Custom Title Time!
*****


Avatar


Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline

Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective

posted on March 10th, 2010 at 07:07 PM



Quote:
Originally posted by matberry
Dell book is good, or ring me while you have 5 min and the engine running & I'll talk you through getting it right.

You'll need a small screw driver and 7, 8, 9, 10, 11mm and maybe a 3/8 open ended spanners, all depending what linkage you have


cheers man. I'll send u a pm as i might booked in with you for a tune up?




"Obey your Dreams"!


62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
Membervassy66T1
A.k.a.: Marcus Vass
Veteran Volks Folk
Wow ... are U reading this?
*****


Avatar


Posts: 2120
Threads: 76
Registered: June 4th, 2003
Member Is Offline

Location: Brisvegas
Theme: UltimaBB Streamlined2
Mood: Happy to own a VW

posted on March 10th, 2010 at 07:47 PM



Hey tar76

Dual carbs (weber or dellorto) is the best thing you can give a volksie engine and Matt will steer you right.
Love the panel.




http://i723.photobucket.com/albums/ww235/vassy66T1/SignatureAVDmod1small.jpg



  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 18.9% - SQL: 81.1% ]