| [ Total Views: 1248 | Total Replies: 3 | Thread Id: 83371 ] |
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on April 28th, 2010 at 06:54 PM |
|
|
Wheel stud required longer
I need to get a set of longer wheel studs for a 1975 kombi. I know the thread is 14 x 1.5mm. I see that a company called Nice Products has 14 x 1.5
long 73mm studs. They come with two different knurled section diameters. 15.7mm and 16.25mm.
Does anyone know what the knurl diameter is for a late Bay bus original stud?
Have you fitted longer studs and what knurl diameter did you use?
Will the holes have to be drilled out? Obviously if the original and after market sizes are different
|
|
|
 pod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline
Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better
|
| posted on April 28th, 2010 at 07:20 PM |
|
|
i used 65 long studs and had to cut them down about 6-8 mm,just went and measured the knurl on my spare hubs and it was 14.9mm ,i used a set of these
on the back http://www.vwparts.net/MB70-2810.html and these which the
knurl was about the same size on the front http://www.vwparts.net/CB7530.html but if i was buying again i would get the 57mm ones
|
|
|
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
|
| posted on May 4th, 2010 at 09:36 PM |
|
|
Call Richard at V-force, he should be able to get you sorted.
Cheers
Brendan
[size=5] Calling all NSW Mid North Coast Veedubbers
Click Below [/size]
[size=6]Mid North
Coast VW [/size] |
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on May 4th, 2010 at 10:30 PM |
|
|
Thanks for that. I have hit a lot of dead ends so far.
|
|
|
