Posts: 172
Threads: 47
Registered: June 29th, 2004
Member Is Offline
Location: Sunny Coast
Theme: UltimaBB Psyche Blue
posted on May 23rd, 2010 at 12:33 PM
Bay Bits
I have a few bits to get rid of, they're just taking up space.
I have some bay glass pieces that I no longer need. I think there is the rh rear, both centre pieces and front fixed 1/4 lights, came out of a 69/70.
Anyone wants them free,come and get em.
A type 4 engine front cooling ducting thing, the whole aluminium front flat cooling bit (technical, I know) with type 4 cooling fan and alternator,
not sure if it works, no play in the bearing, spins freely, again free to anyone.
A stock front beam from wide5 lowlight, spring packs and bump stops, no rust at all, I would rate a very good condition. Comes without centre relay
and damper. $150
Wide 5 lowlight stock spindles. Could be used for dropped spindles or porsche conversion, these are the last year of spindles that you can easily
adapt porsche hubs to fit. Kits are reaily available and CSP do their wide 5 discs or 5 x 130 kits to fit these. $100
Have some engine parts.
Mesa 72 plate external oil cooler with fan. It measure 205mm x 280mm or 8 x 11 inches. Fan works perfectly and no dings in the plates, seen less than
a couple of 1000km's. $80
Free type1 porsche fan shroud, may be good to take a mould, been cut badly around the inlet manifolds. (not by me)
Have 2.5 x in/out full flow pumps, similar to CB's maxi3 pump. http://www.cbperformance.com/catalog.asp?ProductID=195.
Good for stock or near to stock engines, provides the provision of oil filter without having to worry about clearing exhausts. 3 x oil pumps, 2 x
covers, 1 cover has been modified to remove right angles in the flow path, one is untouched, havee the 3rd cover , but it was cracked at the outlet
fitting, by a monkey swinging on a spanner. ( not me either) $100 for everything.
Bugpack fully merged 1 5/8ths exhaust header. This is the version that allows for the use of heat exchanger, unlike normal merged exhausts where you
have to go without heating. All slip joints are secured with pinch bolts. http://www.coolairvw.co.uk/Item/Shop_by_Manufacturer~Bugpack~Exhausts/AC25120...
Not ceramic coated $200
I'll get pics as I drag them from the back of the garage.
All the parts are in Little Mountain, Caloundra, 4551.
