Board Logo
Go To Bottom

Printable Version  
[ Total Views: 726 | Total Replies: 3 | Thread Id: 84274 ]
Author: Subject:  Wide 5 to 4 bolt conversion.
Membershaihulud
Custom Title Time!
*****


No Avatar


Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on June 14th, 2010 at 01:38 PM
Wide 5 to 4 bolt conversion.


I have a 1970, 1500 Beetle with 4 bolt wheels.

The swing axle gear box jumps out of top gear and I'm going to get an older swing axle gear box to replace it. The problem is that the replacement gear box has the wide 5 pattern.

I will need to convert the wide 5 to 4 bolt.

Is it a matter of swapping the brake drums?

If not where will I need to do the swap from? All the way back into the gear box or at the outer bearing fitting?

You advice will be greatly appreciated.
MemberSTIDUB
Custom Title Time!
Over it.
*****


Avatar


Posts: 1497
Threads: 57
Registered: June 23rd, 2008
Member Is Offline

Location: Where else but QLD :)
Theme: UltimaBB Pro Blue
Mood: Worn out, for no benefit.

posted on June 14th, 2010 at 01:54 PM



the drum itself is interchangable,(have had wide 5 on irs stub previously) id imagine internals should be similar but couldnt be sure, got a drum of each? wack one on & check it out :)



Volkswagen Drivers Club of Queensland - member :)

STIDUB - yep its still a work in progress

Vwdcq club car racing/ and crashing while my bug isn't finished.

The above are personal views, no more, no less
Membergrumble
Son of Jim - Creator of Good
******


Avatar


Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline

Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time

posted on June 14th, 2010 at 04:05 PM



You will have to swap more than just the drums,the axle length on the early swing axle box is different,so you will have to swap the axles,tubes and rear brakes (including backing plates)to the other box prior to fitting.The ratios are slightly different but still work okay.
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on June 14th, 2010 at 07:15 PM



yep as per above you can swaps the axles n tubes and brakes but the ratios will be differnt





  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.4% - SQL: 97.6% ]