| [ Total Views: 1453 | Total Replies: 18 | Thread Id: 84524 ] |
|
|
 vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
 posted on June 28th, 2010 at 09:56 AM |
|
|
Discussion about cooling, thermostat etc...
Ok after long time looking into cooling fans and stuff I come to realize that nearly all after market cooling systems don't have some sort of
thermostat. Now I see this as really bad engineering. After checking out GBE website, they also had the same view point as I do. So whats the deal?
Also a question came to mind? If the porsche 911 cooling systems are what after market fans are based off, then what does porsche use to control air
flow thermostatically?
Also another thing I come across is that the stock dog house beats nearly all after market fans/shrouds? how come? because VW designed the their
cooling shrouds to direct air via vortcities (spelling?) to key air at exact velocities. I bet most of these designers of the after market coolers
don't have a degree in fluid dynamics.
So makes me wonder then what works properly and has thermostat control? Or do I have to go the drawing boards and make something my self?
Also another thing that falls into this subject is full flow oiling and its effect on the relief valves vs bigger oil pressure vs different viscosity
vs different temps .Adding oil thermostats and other things too.
So dam confusing coz one day when I do go to build a hypo donk every thing MUST be done right otherwise I am going to be pissed.  engine is like a chain. just think about it.
Vlad.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 28th, 2010 at 01:02 PM |
|
|
Its all down to cost cutting and people being cheap.
It would cost more than double to manufacture the flaps with the shroud and Not many people would pay $200+ for a quality shroud with flaps when they
can buy a cheap POS by empi for $50
New OEM style bellow thermostats havent been availble for decades and those mexican ones arent fail safe, but there is a member on thesamba who can
rebuild old german ones if theyre just punctured and lost their fluid.
mechanics who dont know vws real well think cos their aircooled lawnmower or motorbike doesnt have a 'stat a vw doesnt need one either
I've got a working setup up on my 1776 and my spare 1600 and even around here in summer they still open and close at low speeds and I've also
noticed the main difference they make is to fuel economy especially around town and the heaters work so much better with them
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 28th, 2010 at 06:21 PM |
|
|
I am thinking with a future planed boosted efi engine, I want to use this.
http://www.laperformance.co.uk/blog/?page_id=260
The horizontal fan as it overcomes many of the problems faced by upright 911 fans. Big one being uniform increased air flow, also this would suit a
notch better than upright. Pretty sure most US made 911 fans suffer problems with
air direction and turbulence. A challenge with these kits on the link ^ would be thermostats.
Do you have a pic of what the type 1 air flaps look like? Just to get an idea what the setup is like? I have no idea as I never owned or worked on a
beetle.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 28th, 2010 at 07:09 PM |
|
|
I dont wanna seem like I'm pissing on your parade but before you hand over a huge wad of cash for one of those setups I'll just input my $0.02
Those setups work alright in a bug or a kombi but all aircooled VW engines be it upright type1 or pancake type3 or type4 have one thing in common with
the cooling system, they are all setup so the fan only pulls in cool fresh outside air rather than hot recirculated air from the heads and exhaust
bug and kombi by sealing off the top of engine and ducting in cold air through vents up high and type3s by ducting cold air through the vents in the
sides straight to the fan intake
with that setup theres a good chance it in slow moving traffic it will recirculate hot air from the heads and exhaust and also turbo in your case
I may be way off with that statement but thats always been a problem with type3 and type4 engines in buggies and bajas, the fan intake is down low at
the back of the engine so its always sucking in hot air off the heads and exhaust
Heres some pics of my 1776 thermostat setup
type3 and 4 are a similar theory just different layout
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 28th, 2010 at 07:59 PM |
|
|
traffic? there is no traffic hear. I would run more into an issue of high speed vacuum behind the rear window rather than sucking in warm air from
around the engine. Type 3 cooling system can not be used at all in my planed setup. a flat fan like that one I linked you to would be the best option
as it should sit below the deck and get little bit and get fresh air from around. but type 1 cooling well.
this says more than enough.
there was a pic and some vids of a notchback running the horizontal 911 fan and looked quite promising.
I will post it if I can find it
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 29th, 2010 at 12:39 PM |
|
|
here we go.
took me 8 hrs to bloody find this. haha no wonder its in German. 
http://www.youtube.com/watch?v=fwbreVMgc2I&feature=related
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 29th, 2010 at 12:59 PM |
|
|
people have used type1s and porsche fans in type3 before, its not that it doesnt work, its just not a key ingredient for long living engine
most of them are all for show or a few strip runs so its no big deal but if i was dropping that sorta coin for an engine I'd want maxium life span
from it
have a hunt around the forced fed and fuel injection forums over at shoptalk, I've seen a few f**k off EFI turbo setups with stock type3 cooling
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 29th, 2010 at 01:14 PM |
|
|
I have been snooping around those forums. that how i got the idea of the flat fan as some people in that forum were using it and found it to be the
best setup.
so if thats the case then that is ones problem out of the way. next one is the issue of it running too cold and long warm up time. thats is to say if
the these German fans kits don't have thermostat system , which
they may well already have?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on June 29th, 2010 at 06:32 PM |
|
|
| Quote: | Originally
posted by vlad01
Ok after long time looking into cooling fans and stuff I come to realize that nearly all after market cooling systems don't have some sort of
thermostat. Now I see this as really bad engineering. After checking out GBE website, they also had the same view point as I do. So whats the deal?
Also a question came to mind? If the porsche 911 cooling systems are what after market fans are based off, then what does porsche use to control air
flow thermostatically?
Also another thing I come across is that the stock dog house beats nearly all after market fans/shrouds? how come? because VW designed the their
cooling shrouds to direct air via vortcities (spelling?) to key air at exact velocities. I bet most of these designers of the after market coolers
don't have a degree in fluid dynamics.
So makes me wonder then what works properly and has thermostat control? Or do I have to go the drawing boards and make something my self?
Also another thing that falls into this subject is full flow oiling and its effect on the relief valves vs bigger oil pressure vs different viscosity
vs different temps .Adding oil thermostats and other things too.
Vlad.
|
Hi Vlad
Yes,
I've read that the aftermarket fan housings are rubbish...
If You look closely into a VW fan housing You will see all the design work they have done...
I had a new type of thermostat I bought from CBperformance in the USA... but can't find the rod...
I also have an original beetle thermostat assembly but can't find the rod.. lol
I would put it back in if I could find a rod.. lol
as its 6C here at the moment.. and having no thermostat isn't good... IMHO.. plus it takes ages for the heater to get hot... lol
Gene Berg did a lot of testing and said the doghouse fan shroud is the best to cool the heads and the next best is the non doghouse fan shroud... He
tested for 20-30 years...
thermostats and the air flaps should be used...
LEE
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 29th, 2010 at 07:38 PM |
|
|
so what are the non dog house the gene tested? those 911 fans are good if you get the proper ones with internal air deflectors and guides. As always
the German made 911 fan kits are exactly done like that so they perform good.
Obviously you would not buy a US(china made) 911 fan. aka scat 911 fan kit. its garbage. I never used one but you can tell straight away buy just
looking at them what the problems will be.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on June 29th, 2010 at 08:00 PM |
|
|
| Quote: | Originally
posted by Joel
people have used type1s and porsche fans in type3 before, its not that it doesnt work, its just not a key ingredient for long living engine
most of them are all for show or a few strip runs so its no big deal but if i was dropping that sorta coin for an engine I'd want maxium life span
from it
|
Joel is on the money here.
The air intake must be only fed cool air. Just because you see pics or read somewhere it's been done doesn't mean it'll be ok here is Oz with our
summer temps, or that the engine lasts over 100 000km..... Cooling system is a major system derectly protecting your engine...without it the engine is
toast.
Thing with air cooled, is they keep on going, if it was water cooled, when they overheat, they soon let the driver know they are complaining with
steam going everywhere, or water getting into the oil or whatever, but not with air cooled. They just get hot. Sometimes they just keep going but the
fatigue that occurs isn't always evident, for a while anyway.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 29th, 2010 at 08:20 PM |
|
|
this pretty much sums it up.
http://www.tunacan.net/t4/tech/upright-911.shtml
I figured out a great idea. you know the deck in the type 3 vw? well you could custom make a large vent in the deck and run a big aluminum duct
straight onto the dog house. like this 
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on June 29th, 2010 at 08:27 PM |
|
|
That will still draw in air that has been through the cooling system. I'd look at sealing similar to a beetle around the engine and keeping the
intake unrestricted, pipes in front of he fan will reduce the actual output significantly.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 29th, 2010 at 09:36 PM |
|
|
no it wont. a 14 inch air duct by say 60cm long wont be restrictive. the stock air channels from inside the guards are far smaller than that.
secondly, the air being drawn in is fresh cold air from a completely isolated source, you know? front area around the gear box. type 3s dont have a
fire wall like beetles do.
lol isn't the drawing clear enough?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on June 29th, 2010 at 11:49 PM |
|
|
| Quote: | Originally
posted by vlad01
no it wont. a 14 inch air duct by say 60cm long wont be restrictive. the stock air channels from inside the guards are far smaller than that.
secondly, the air being drawn in is fresh cold air from a completely isolated source, you know? front area around the gear box. type 3s dont have a
fire wall like beetles do.
lol isn't the drawing clear enough?
|
Yes,
looks good to Me
seeing how not much air can come from the air vents in a type 3
it always amazed Me how the notchback got enough air from below the rear window..!!!
but they do have a nice sized fan... lol
so, a duct like that into a type 1 engine and fan housing etc..
should get enough air... when driving along but when stopped??? I don't know..
the longer the ducting the better..
I can see what Matt is saying, the beetle engine bay is isolated from the heat under the engine where Yours would not be... and that is a LOT of heat
under a beetle engine..
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on June 30th, 2010 at 09:11 AM |
|
|
Hi
I going to have look at Valla for the bits to finish the thermostat on my sons bug, just need one flap from memory.
Now that we will soon have no heaters I was looking at buying a 36 hp style fan housing, but they seem to be rubbish.
Has anybody seen a step by step web page on cutting off the heater outlets and narrowing a stock dog house fan housing?
Steve
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on June 30th, 2010 at 09:21 AM |
|
|
| Quote: | Originally
posted by 1303Steve
Has anybody seen a step by step web page on cutting off the heater outlets and narrowing a stock dog house fan housing?
Steve
|
No but done it a few times, easy when your in love with your angle grinder. 
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 30th, 2010 at 10:03 AM |
|
|
Steve, there's a guy on VZi thats got a few pics of when he cut down his stock doghouse one but I've also seen I think on thesamba someone that used
the front skin of an original 36hp and mated it to the rear section with the vanes of a OEM doghouse shroud
Finished result looked like all the 36hp shrouds on the marke but had the qulaity of an original
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 30th, 2010 at 10:07 AM |
|
|
after snooping some more last night. I figured I will use jake raby's DTM cooler. I far as what I read from him, they dont have a thermostat but he
says a stock one can be fitted
with some modifications. its a work of art the DTM. Nothing short of amazing 
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
