[ Total Views: 764 | Total Replies: 1 | Thread Id: 8492 ] |
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 16th, 2003 at 09:19 PM |
|
|
fitting 1500 gbox into early bug
whats involved in fitting a 1500 type gbox into 62 bug?
are the torsion housings the same width?
marcel
|
|
geodon
Wolfsburg Wizard
Posts: 478
Threads: 63
Registered: August 28th, 2002
Member Is Offline
Location: geelong
Theme: UltimaBB Pro Blue ( Default )
Mood: stumbling
|
posted on July 17th, 2003 at 06:21 AM |
|
|
Marcel I have a 1500 box on my '60 K/G.
It fitted OK but 2 things I noted are that the torsion bar arms were a real bugger to connect and the clearance bet the inside edge of the guards
& the outer edge of the tyres can almost be measured with a feeler guage!! That should not be a problem on a bug. Great box tho, I think it may
have a slightly higher final drive ratio- nice for country roads & good Km/litre.
|
|
type82e
Wolfsburg Wizard
Posts: 591
Threads: 108
Registered: August 25th, 2002
Member Is Offline
Location: lismore nsw
Theme: UltimaBB Pro Blue ( Default )
|
posted on July 17th, 2003 at 07:43 AM |
|
|
I wasnt so much worried about the tire to guard fit just if it would bolt up to the torsion bar arms.
I was under the impression that the distance between them was different?
so its just that the axle length is different on earlier 1200 style gbox and the later 1500 style gbox
marcel
|
|
BUGBOY
Super Moderator
Chief Toy Dude / Head Cruiser
Posts: 2146
Threads: 403
Registered: August 27th, 2002
Member Is Offline
Location: Bass coast
Theme: UltimaBB Pro Blue ( Default )
Mood: A wise German once said
|
posted on July 17th, 2003 at 09:23 PM |
|
|
flip flop
If you fit your axles to the 1500 box it will go straight in and your wheel clearance will all be the same as before.
New box ,old axles and you carn`t go wrong.
Your spring plates then line up as the axle lengths on a 1500 box are longer.:thumb
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
|
|