| [ Total Views: 2083 | Total Replies: 32 | Thread Id: 85519 ] |
| Pages: 1 2 |
|
|
 privatelux
Learner Dubber
Posts: 15
Threads: 9
Registered: August 7th, 2010
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 21st, 2010 at 08:55 AM |
|
|
Rust Prevention
Looking for something to spray inside the sills and important little hard to get at places on my 1302s
Has anyone had experience with "Prolan" (Lanolin oil) or Ruststop Rx100 or "Fisholine" as spray on rust preventatives. All claim magical
properties in penetration and prevention. I intend using POR15 on where I can easily get to. That is a proven product..... for floor pans etc, but I
also need something that creeps in and penetrates where I cant easily get to.
Fisholine and lanoline will smell of their original owners ie, fish and sheep, but that will pass and is preferable to the dreaded rust.
|
|
|
jacky_moo
Seriously Crusin Dubber
Posts: 115
Threads: 9
Registered: February 4th, 2010
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: Mir geht's gut!
|
| posted on August 21st, 2010 at 09:08 AM |
|
|
As a preventative we have used Prolan on some jobs ... have not had any clients come back with any issues as yet, but in terms of the smell... you may
want to not use the car for about a week and just let it air out ... we use it on converted shipping containers and even in that volume of space the
stench is horrible
on some of my older cars ive used a combination of: brush on tar / sikaflex / and cold gal paint
schnell!! schnell!! schnell!! schnell!!
 |
|
|
bugzla
Custom Title Time!
Posts: 1164
Threads: 240
Registered: June 9th, 2007
Member Is Offline
Location: townsville
Theme: UltimaBB Pro Blue ( Default )
Mood: always happy
|
| posted on August 21st, 2010 at 09:21 AM |
|
|
electronic rust proofing coupler tec and erps
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12759
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 21st, 2010 at 11:21 AM |
|
|
I have always heard good things about Wurth products
http://classicandspeedparts.com/index.php?option=com_virtuemart&page=shop...
Futue te ipsum!!!
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on August 21st, 2010 at 01:21 PM |
|
|
http://ppcco.com.au/coatings_sw2.htm
http://ppcco.com.au/fact_sheets/pi/pi_sw2oil.pdf
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on August 21st, 2010 at 01:53 PM |
|
|
no matter what product you use you must clean and the dust n dirt out of the cavity to be protected
i use a old hack saw bland to scrap the crevices out them blow out with air some times even wash out with water and allow to dry before applying
the preventative
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on August 21st, 2010 at 03:57 PM |
|
|
Deodourised fish oil is never de-odourised 
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
jjwebb123
A.k.a.: Jason
Wolfsburg Wizard
Posts: 617
Threads: 63
Registered: August 15th, 2009
Member Is Offline
Location: Nrth QLD
Theme: UltimaBB Pro Blue
Mood: Trying to get it puring
|
| posted on August 21st, 2010 at 05:29 PM |
|
|
For general maintenance of rust i use Lanolin.Spray where ever i can get.
My dad also uses it in the same manner,and both have found it to work fine.
Used fish oil once and never again.Simply becuase it last for freakin ever,and stinks.
but you can get the stuff that doesnt stink as much,but like chris mentioned above.not really.LOL.
but that is as maintenance,in most cases you should really try to physically remove it.
Hope that helps.
good luck.
"A car for the people, an affordable Volkswagen, would bring great joy to the masses and the problems of building such a car must be faced with
courage."
Adolf Hitler At opening of 1934 Berlin Auto Show
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 21st, 2010 at 11:33 PM |
|
|
FISH OIL IS EXCELLENT NEWS...
| Quote: | Originally
posted by privatelux
Looking for something to spray inside the sills and important little hard to get at places on my 1302s
Has anyone had experience with "Prolan" (Lanolin oil) or Ruststop Rx100 or "Fisholine" as spray on rust preventatives. All claim magical
properties in penetration and prevention. I intend using POR15 on where I can easily get to. That is a proven product..... for floor pans etc, but I
also need something that creeps in and penetrates where I cant easily get to.
Fisholine and lanoline will smell of their original owners ie, fish and sheep, but that will pass and is preferable to the dreaded rust.
|
I have used Fish-oil since the late 60s...
used to smell like fish for about 6 months back then..
so, it reminded You what a great job You had done... lol
Now, it usually deodorised and doesn't smell that bad and not for that long.. especially in summer... or use a hair dryer fan heater on it in
winter...
Fish oil spreads like oil.... goes everywhere... and just drips out of holes etc.. also stopping the edges of the holes from rusting... its the color
of gearbox oil...-light honey colored..
so, it goes thru dirt/dust etc... stopping the air getting to the metal... and coats everything... so stops all rust..
whether there already or not... makes no difference...
when dry can be painted over...
don't forget to spray some under Your windscreen and rear window rubbers... to stop any rust already there..
I coated under My rubbers before the rubbers were fitted about 3- 4 times...
FISHOLENE OR KILLRUST ETC ARE GOOD BRANDS...
CHEERS
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 21st, 2010 at 11:36 PM |
|
|
My Son likes Lanolin to stop rust...
He doesn't like the smell of fish oil...lol
whether Lanolin dries ?? I don't know...
LEE
PS: fish oil dries hard after it has gone into every nook and cranny.... lol
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 23rd, 2010 at 08:54 AM |
|
|
Both fish oil, Lanotec lanolin and other commercial products like Waxoyl are all very good.
The electronic anti-rust units are a sham and have no scientific basis. http://www.ftc.gov/opa/1996/07/rust3.shtm and others.
They're in the 'buyer beware' museum alongside the pyramid crystals and Brock orgone energy polariser.
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7671
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on August 23rd, 2010 at 09:07 AM |
|
|
I've used 10 grade hydraulic oil mixed with diesel and sprayed into nooks n crannys on various 4wds n area I've had before going beach work
never had any rust issues n had the cars for years
fisholene will have every neighborhood cat whoring all over ur pride n joy n you'll wear a peg on your nose for months so forget that evil stuff
erps I've heard about n some dubbers on the sunny coast use such things n I've heard good stories about em
good luck with your quest
h
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7671
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on August 23rd, 2010 at 09:15 AM |
|
|
| Quote: | Originally
posted by Phil74Camper
Both fish oil, Lanotec lanolin and other commercial products like Waxoyl are all very good.
The electronic anti-rust units are a sham and have no scientific basis. http://www.ftc.gov/opa/1996/07/rust3.shtm and others.
They're in the 'buyer beware' museum alongside the pyramid crystals and Brock orgone energy polariser.
|
phil
to me the link u quoted is from the land of septics from "For Release: July 3, 1996"
I feel science has moved on since this time n would rather read a recent study preferably studies before I make an informed decision re the erps
process
cheers h
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 23rd, 2010 at 10:59 AM |
|
|
Science (the process of discovery) moves on but the basis behind it does not. Something that was proved fraudulent in 1996 does not somehow become
legitimate in 2010 just because 14 years have passed. For example the polariser was tested and found to be baseless in the 1980s - a new study now
will make no difference. Snake oil is still snake oil.
Electronic anti-rust units don't work because an electron 'cloud' can't be maintained - air is an insulator. There is a possibility of it working
in sea water, which surrounds the components with a conductive medium. But in that case you can use galvanic protection that doesn't need a power
source. I head Dr Karl on JJJ say much the same on his radio show last year; unfortunately I can't find a link. The only positive claims about these
things come from the makers - that should tell you something.
But by all means fit one if you want, it's your money.
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7671
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on August 23rd, 2010 at 11:32 AM |
|
|
no worries..
im into science n take studies seriously
im just pointing out that a study from many years ago maybe a little dated n surely there are more recent ones to make a more informed decision
from just this "study" and make a defined judgement is a little narrow focused IMAO
but thats just my op
cheers paul
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on August 23rd, 2010 at 11:48 AM |
|
|
Wurth cavity wax is good, and doesn't dry out completely. It comes in spray cans, and can be sprayed into all the at-risk areas. Also, it doesn't
stink.
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 23rd, 2010 at 12:55 PM |
|
|
Remember to remove all the foam inside the body cavities at the rear, up above the engine beside the rear windows. That's where Australian Beetles
rust. Use a stiff wire like a straightened coathanger and get as much out as you can.
Yes I'm sure there are more recent studies out there. That was only the first link I found, there are plenty more. Do a Google search on 'electronic
anti corrosion' and click away. However be aware that most of them are manufacturer's sites - and we know how they can stretch the truth.
Look at this one for example. As soon as you see a manufacturer claiming "this is the ONLY verifiable system on the market..." you know that
something is dodgy. It means that all the others don't work. So why should this one? And you can bet that another manufacturer would claim the same -
in which case they are both wrong and NONE of them will work.
http://crazystu.com.au/glorust-electronic-anti-corrosionrust-device-for-your-...
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 23rd, 2010 at 04:02 PM |
|
|
Yes I agree
those electronic anti rust systems are recommended for new cars but most new cars are guaranteed from rust for at least 10 years or more... so, who
knows if it works .. lol
so, why would You bother?
fish oil is an excellent product .. well worth the smell..
which disappears when it drys... and its deodorised these days..
its also non toxic... and You can catch the excess dripping out and re use it...
the major problem being the type of moisture holding foam used by VW around the rear window to stop the noise of the engine getting into the
cabin..
after many years the moisture will eat thru the metal...
the beetles with air vents in the sides are the worse affected.
You can also do what many people do in UK etc.. spray all your old oil under Your car... or brush it on.. lol
I don't recommend using hypoid oil.. old or new...lol
it still stinks... YIKES...
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Newt
Wolfsburg Wizard
Posts: 478
Threads: 82
Registered: March 1st, 2008
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Grey
Mood: Born 10 minutes late & never caught up.
|
| posted on August 24th, 2010 at 12:01 AM |
|
|
Hows that work? Ive heard of electrified jetty pillons to stop them from rusting.
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on August 24th, 2010 at 08:54 AM |
|
|
Hi
Cut the bottom off the A pillar, its a dust and rust collector. Once its done its hardly noticeable.
Steve
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 24th, 2010 at 09:05 AM |
|
|
It's called galvanic protection. It's based on the fact that different metals have different electrical potentials, based on their atomic
structure.
When you put two different metals together in an electrolyte solution, you create an electrical potential difference and electrons flow from the anode
to the cathode. This causes the metal with the higher 'anodic potential' - the less 'noble' metal if you like - to corrode, protecting the
cathode. The most common example is zinc-plated steel. Normally nothing happens, but when the zinc is scratched and the steel is revealed, the zinc
corrodes rather than the steel.
The effect is much magnified in sea water, as the salt water acts as an electrolyte and assists in the electron transfer process. In the olden days
sailing ships used to have copper sheathing on the hulls to stop barnacles from fouling the bottom. These were nailed to the wooden hull with iron
nails. They soon noticed that the iron nails corroded away in no time, as they were acting as a 'sacrificial anode' to the more noble copper. When
the iron nails were sheathed in wax paper, insulating them from the copper and the sea water, they lasted much longer. Nowadays ships use zinc blocks
as sacrificial anodes, designed to corrode instead of the steel or aluminium hull.
Gold doesn't corrode - it stays shiny forever so it has an anodic index of 0.00. The more electrical potential a metal has, compared with gold, the
higher anodic index it has and the better sacrificial anode it makes. In other words, a higher number will corrode to protect a lower number. Silver
is 0.15; Nickel is 0.30. Copper is 0.35, Brass and Bronze are around 0.45, while stainless steel is 0.50. In other words, if you put gold and
stainless steel in salt water, the stainless steel will corrode as it has a higher number! Tin is 0.65; Lead is 0.70; Iron is 0.85; aluminium is
around 0.9; zinc is 1.25; magnesium is 1.75 and beryllium is 1.85.
An electrified system can be used to 'boost' the galvanic protection by forcing a larger electric potential between two metals that might have
similar electrical properties. For example, the gap between zinc and aluminium is not as great as zinc and iron, so a normal zinc block won't work as
well on aluminium pylons as it would with steel. So you attach a power source and boost the electrical potential.
BUT - this only works if the two metals are both immersed in an electrolyte - such as a pylon in sea water. Otherwise there's no electron transfer.
And that's why the car 'anti-rust' doohickies won't work - they are applying a very slight electrical current to the steel, via (I presume) less
noble anodes that should corrode instead of the car body. But consider - there is no electrolyte medium between the anodes and the car body, so
nothing will actually happen. Except that the car body will rust as usual.
One final point - if these gizmos actually worked, don't you think the makers would fit them as standard? Volkswagen spent years developing full
body-dip phosphoric paint coatings, baked enamel finishes, hot wax flooding and now full galvanised bodies, to stop corrosion. All very expensive,
much more so than a dinky little electrical thing that could be fitted at the factory. But they aren't - because they don't work.
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on August 24th, 2010 at 09:19 AM |
|
|
Phil, I recall all that from my high school days but you explained it much much simpler and therefore better, or maybe I was just much much dumber
back then, whatever the reason, well done. 
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 24th, 2010 at 09:20 AM |
|
|
I have seen the electronic systems work. NO QUESTION
As a frequent beach driver, I've tried to maintain vehicles in the dreaded salty environment for over 40 years, and there is without doubt imo that
the electronic systems I've seen in action make a huge difference.
Having said that, a rust preventative in an old car like our a/c vw's, needs to kill the rust that's already there, seep into seams using capillary
action and stay fluid, so I have used a custom brew for many years with great results. The problem with most commercially available rust proofing
agents, is they dry somewhat, and so don't get inside the metal seams and folds. Then they actually seal any further agent from penetrating, and seal
moisture and salt inside that seam making more rust inevitable. The manufacturers design the products this way mainly so the product doesn't keep
draining off the vehicle, messing up peoples nice garage and causing law suits etc. BUT, when it dries it doesn't work.
I use a brew of fisholene, new engine oil and diesel, approx 60/30/10. We did tests years ago, where we put samples of different treatments in the
bottom of a piece of steel pipe laying on a bench. With a good brew, capillary action will carry the fluid right over the top inside of the pipe
!!!
The other big issue is getting the rust proofing everywhere, otherwise it can't do it's job, so internal 360* spray tubes, a hoist and lots of time
for cleanup are required to do the job properly, combined with electronic protection and your car will last for ever.
ps Without electronic galvanic protection, there would be NO aluminium boats still afloat (this is where the technology was developed).
By the way, very good post above Phill.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 24th, 2010 at 09:38 AM |
|
|
Matt, as I explained it will only work with an electrolyte medium between the anode and cathode. OK, if you have it turned on while you drive at the
beach, and the contacts are both in sea water, it will work to some extent while the contacts remain salty wet. Once it dries, or you go home and hose
the salt water off, IT DOESN'T WORK ANY MORE. You then rely on mainstream anti-rust treatments - which if you've done properly, as I'm sure you
have, are the reason your cars haven't rusted away.
I am perfectly aware that aluminium boats use it - I thought I explained that. I also explained that boat hulls are continually immersed in salt water
- an electrolyte solution.
It was around a bit before aluminium boats appeared too. Galvanic protection was first described by Sir Humphrey Davy in 1824, and the Royal Navy
experimented with iron sacrifical anodes on a copper-sheathed sailing ship called HMS Samarang. It worked - corrosion of the copper was much reduced.
However it reduced the effectiveness of copper's anti-fouling properties (marine growths were normally repelled by the released copper ions as it
corroded).
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 24th, 2010 at 09:57 AM |
|
|
Yeah, I agree with most of what your saying Phill, but in my experiences, where I see many vehicles, all going to the beach with differing service
reguemes and treatments, and all the electronic vehicles experience things that just have to be from using the 'gadget'. Don't worry, I don't sell
them or even own one, they do run the battery down noticeably quicker (maybe this is why manufacturers don't go there?), and the dudes that fit them
can still do questionable work, but, disc rotors staying shiney overnight is all but unheard of without it. Also when a buggy was here that uses it,
after disconnecting the system due to repairs being carried out, rust seemed to start immediately in several areas, this car was unwashed inside and
sand and therefore salt on the floor, but was also dry!
I haven't had a chance atm to look at the links you've posted, I intend to, but I thought the worked buy controling an underlying electrical
potential and changing it's polarity whith a particular frequency this somehow preventing the oxidation???
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 24th, 2010 at 11:12 AM |
|
|
Hi Matt, well you've mentioned some interesting things there.
Disc rotors staying shiny? It would be interesting to know where abouts the 'unit' and its 'contacts' (anodes) are, in relation to the disc
brakes, and how far away. Experiment - get a long-lead multimeter and check if there's electrical continuity between the unit and the brake disc. No
rubber seals, or grease, or non-metallic parts in the way. In other words, electrons should be able to move freely between the unit and the brake disc
to have any effect. If there is no continuity, there CAN'T be any effect.
Rust starts immediately when the unit is disconnected, but the buggy had sand and salt inside ! Even if dry, there is moisture in the air and that's
all it takes.
Changing the polarity with a particular frequency? Electrical polarity refers to one pole always being positive and one always negative, and the
current only flowing one way, which is always the case with direct current. Only alternating current has a changing polarity. Are you sure the makers
are claiming that they are applying AC to your car body?
Frequency refers to wave forms - the numbers of cycles per second. For direct current, there is no frequency - it's a contiinuous stream of
electrons, like water flowing out of a hose. Alternating current on the other hand, does have a frequency. In Australia, our household frequency is 50
Hz; in the USA it's 60 Hz. Historically there were lots of different AC frequencies used around the world, but since the 1940s these two have become
standard. Lower frequencies are used in some railway and industrial systems, and some higher frequencies in aircraft, submarines and spacecraft. You
can convert between different AC frequencies, but any one electrical device only uses one AC frequency, and i don't believe that anti-rust gizmos use
AC. You can rectify AC to make a DC current with a 'chopped' sine curve at 50Hz, but that would mean it must take the cars' 12V DC, convert it to
AC at a certain frequency, then convert back to DC. Hmm, no wonder it runs the battery down noticeably ! And even if it does, how does a rectified DC
current assist galvanic protection better than a straight DC current? Due to the curve troughs, it ought to work more poorly.
I respect your anecdotes, but amazing claims require amazing evidence. We are often easily fooled when things are not as they seem. Here's an example
- you would say these wheels are moving, but they are not. You would also say the black and white lines are angled - they are not, they are parallel.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on August 24th, 2010 at 11:40 AM |
|
|
I understand all your points of electrical principals, (Electrical fitter mechanic by trade with Electronic technician courses, but about 20 years ago
 )
The frequency I refered to was exactly as quoted, 'changing it's polarity whith a particular frequency'.
The contacts are in 3 or 4 positions well grounded along the vehicle chassis.
I was surprised as much as you re the disc's considering thier expected electrical isolation.
Neither of those visual tricks worked for me, I saw no wheels moving AND parallel black/white lines !!!
I do have one eye not so good so old 3D technology never worked for me......maybe some connection, or maybe some people have more brain function than
others !!!! WTF
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
privatelux
Learner Dubber
Posts: 15
Threads: 9
Registered: August 7th, 2010
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 28th, 2010 at 04:58 PM |
|
|
Thanks for all your ideas. This forum is great. I dont feel like I am taking shots in the dark. I have used fishoiline before and liked the results
so I like the idea of the brew of fishoiline/engine oil and diesal...... Penetration is the key as we cant pull our cars down to minor componants.
How would I best get the stuff into the sills? Mine is a 71 1302s in amazing condition.... but now is the time to make sure it stays that way. I see a
couple of drainage holes at he base of the door openings that appear to go down into the sills .... or maybe they bypass them? Also see a couple of
rubber plugs in the base of the sills .... but the holes seem too small to get a tube up into.
Also I see your concern about the sound proofing in around the rear window. I do have side vents. How do I get into that area to get the proofing
out?
You are a great helpful crowd.... thanks
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on August 28th, 2010 at 06:49 PM |
|
|
Yeah fishoil works great. Don't know why people complain about the smell? Doesn't even smell like fish. Kind of smells like a combo or tarnished
brass and varnish.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on August 28th, 2010 at 07:23 PM |
|
|
RUST
She is made of iron, sir. I assure you, she can. And she *will*. It is a mathematical certainty.
|
|
|
| Pages: 1 2 |
