Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1711 | Total Replies: 1 | Thread Id: 8722 ]
Author: Subject: Preping a bull bar for paint
MemberRobo
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4491
Threads: 120
Registered: February 13th, 2003
Member Is Offline

Location: Tweed Heads
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval madness

posted on July 24th, 2003 at 08:00 AM
Preping a bull bar for paint


Hi Guys
I scored a steel bull bar for the Kombi, it has some rust on the plate that has bubbled, I have ground it back and treated it with rust converter, it hasent eaten in to the surface too bad and a bit of spray putty should fill the deppressions
I was thinking of getting the rest of it sand blasted, how bad can the surface be and blasting still be effective (rust removal) and what sort of charge money wise would I be looking at to get it done!
It is a good bar, and I have been looking for this particular bar, made by Town & country in the seventys.
Rob.....




Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft

http://home.iprimus.com.au/noh20/BYRONLOGO.gif
Super Administratorhelbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
*********

Rank Avatar

Avatar


Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline

Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair

posted on July 24th, 2003 at 04:17 PM


Rob, I got our bullbar sand blasted and it made it really easy to paint.

The metal piping was not super smooth to begin with, but after priming and painting it is really glossy.

The sand removes all rust, but it must be primed straight away with at least an etch primer. Everywhere your hands touch start to go orange on the surface of the metal within hours. :thumb




MemberAndy
Son of Jim - Creator of Good
Andy's Adventures
******


Avatar


Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man

posted on July 24th, 2003 at 04:59 PM


Hi Robo,
Doesn't matter how bad the rust is, sand blasting will remove it. If there's no good metal under the rust you just get holes back :D
As for price, not sure. I had 5 rims done at ~$20ea, but not sure if that's good or bad??
:thumb
MemberRobo
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4491
Threads: 120
Registered: February 13th, 2003
Member Is Offline

Location: Tweed Heads
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval madness

posted on July 24th, 2003 at 07:10 PM


Thanks Guys
I will go ahead and get it blasted, it is a good bar so it will be worth it.
Rob....




Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft

http://home.iprimus.com.au/noh20/BYRONLOGO.gif


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 13.3% - SQL: 86.7% ]