| [ Total Views: 12003 | Total Replies: 103 | Thread Id: 87280 ] |
| Pages: 1 2 3 4 |
|
|
 fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 22nd, 2010 at 06:38 PM |
|
|
Subaru Gear box
Hi Guys
Any of you drag guys looking at trying one of these subaru box conversions??
|
|
|
LIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline
Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...
|
| posted on November 23rd, 2010 at 10:21 PM |
|
|
As with most people here those who do the Suby conversion boxes are waiting for some actual evidence on how they work. Last I read they still in the
developmental stages and only 1 or 2 had gone into a car but no reports?
[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]
Alder Outlaws VW Racing - check it out on fb!!
|
|
|
fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 06:37 AM |
|
|
Yeh i here what you saying, It looks really good on paper,but you have that small thing telling you your not sure! Where are the ring and pinions
made? are they Aussie made, some one nice like Albins?
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on November 24th, 2010 at 06:53 AM |
|
|
It may be a bit tricky to get the vw motor to sit in the right spot once to fit a Subaru box to it.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on November 24th, 2010 at 08:58 AM |
|
|
CW/P I believe to be made in India. The designer claims them to be a very high standard. Time will tell no doubt as to how well they will handle our
application. Crazy Col asked whether changing engine rotation wouldn't have been a easier option than manufacturing these parts overseas. All
required would be a new cam and starter mods.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on November 24th, 2010 at 09:31 AM |
|
|
Worked for Corvairs, although with a vw engine there is other considerations like cooling fan and generator direction
I'm thinking about the subi box as a possibility once my current Lbug box gives up the ghost, like the others have said I'm waiting on the end
product to prove itself abit more first.
|
|
|
66deluxe
Custom Title Time!
Posts: 1593
Threads: 139
Registered: August 16th, 2005
Member Is Offline
Location: Murrumba Downs, Brisbane.
Theme: XMBX Pro Green
|
| posted on November 24th, 2010 at 11:52 AM |
|
|
Wouldn't it be better to just build a Subaru drag car. So sick of suby this suby that
This is my Volkswagen, there are many like it, but this one is mine. Without me my Volkswagen is useless, without my Volkswagen, I am useless.
61 Karmann Ghia 2110cc type1 w Los Panchito's
66 Deluxe Beetle 2270 type 4
10 Subaru WRX Impreza
|
|
|
fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 12:49 PM |
|
|
I dont want to put a subi engine in my bug, I just want a good trans that dosnt cost me an bodily organ. build a real nice t1 box for my last 2276
with all the gear(sorry about the pun)Albins gears,quaife diff, gusseted case about $5000.its great but not 5 speed and i want a nice box for my
57oval 2165 turbo motor that will take the power(aim about 350hp) on paper it looks like a good idea, and just want to see if any one else is toying
with the idea, would be good to here your feed back.
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on November 24th, 2010 at 01:13 PM |
|
|
I'd like to hear from the guy building them. I thought he had the first one on the road already. Maybe it broke?
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 05:09 PM |
|
|
Hey Guys, Todd here from http://www.subarugears.com I'll try and answer all your
questions.
Well it's been an interesting year with getting Subaru boxes up and going. I basically got things going by showing off the first completed box at the
Nationals this year.
We put that into an EJ25 powered buggy and drove it for a couple of weeks. Did a few videos of it which are up on youtube (linked from my site). This
was a basic $3700 box which worked well with the VW cable clutch and had no probs with the 31" tyres and power of the EJ25.
This box then got sold to a customer on the central coast who is converting a beetle to EJ22 power. His car is still on the way to being finished and
will be on display at my stand at the 2011 Nationals. My second test ring and pinion was sold to a guy in South Africa who is yet to do anything with
it which is a real shame, I had hoped we would have had another example on the road to show potential customers.
I ended up having to change supplier after the factory in India frigged me around for 7 months. Shame as their product was perfect. Offset Hypoid
gears are difficult to make and not many gear factories have them. Albins do not have the ability to make them hence I had to stay offshore. The only
factory in Australia who can make them is Dana/Spicers and they only want to know about Commodore and Falcon diffs. My new factory is in China. I have
specified the same materials and tolerances as the initial set, with independent QA reports to confirm the quality of the product. I actually spec a
much higher grade of steel than necessary, just to be sure that this is a top notch product. First set from this factory will be here on Friday and
will get tested in the same EJ25 buggy. I am also fitting a Torsen LSD to put maximum strain on the diff to ensure all is perfect.
Interestingly, last week 2 sets of gears showed up from the Indian factory (they sent them to germany) so I can get an independent comparison of the
Indian Quality vs Chinese Quality. I have had the same reservations about Chinese quality as everyone else but they have come a long long way.
Hopefully this 6 month delay to getting the product out there is now solved and we can get a flood of these onto the market. I actually have a bunch
of backorders to fill for various vehicles so am sure you will see more soon.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 05:15 PM |
|
|
We have a bunch of interesting cars that are going to have these boxes : EJ20T Kombi with 5 speed, EZ30 Buggy with 6 speed, EZ30 Kombi with 5 speed
cable shift, EJ22 beetle, EJ20T type 3, EJ20T buggy, EJ22 Vanagon, EJ25 Vanagon...that's what I can think of at the moment.
Of course there's my 4WD EJ20TT Manx but I doubt I'll ever get it done with all this gearbox work 
Some other interesting things I started making as accessories. I now make the 2wd locking sleeve that locks the box into 2WD, I make the block off
plate to stop the oil leaking out the back of the box when the 4wd yoke is removed, I make Subaflanges which fit onto the Subie box and allow 100mm or
108mm VW/Porsche CV's to fit onto the Subie box.
If you don't want to go Subie engine I am about to start testing the VW aircooled to Subie 5 speed adaptor plate/bellhousing and flywheel conversion
kit. This should be a big hit in aircooled California.
Currently having the VW 857 block (diesel TDI motor, petrol VW motor, Audi motor) to Subie adaptor plate/bellhousing conversion kit designed. Again,
big market in USA and Germany for these.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 05:38 PM |
|
|
We will soon see if we can get the VW motor to sit in the right spot with the Subie 5 speed conversion kit. I think with my extended Subaflanges that
put the inner CV to the outside of the frame horns we will be able to keep the motor nice and low where it belongs.
I looked at the whole reverse rotation engine thing before I started this project. Sat down with Brett Middleton at MRT who knows a thing or two about
this. You need 2 or 4 cams, then look at the water pump and oil pump as well, starter motor too. Then get the ECU to do everything backwards. With the
advent of adjustable camshafts this becomes even more difficult because you end up advancing or retarding the cams the other way too. That would be
some serious and expensive dyno time. For my money, that was all too difficult.
Hopefully have answered all your questions and explained a bit why you haven't seen more on the road just yet. Hope this is not too much of a
'commercial' posting on the forums, I am just trying to get the info out there so you peeps can make your own informed choices. Have a surf over to
http://www.subarugears.com and keep an eye on our build threads over the next few
months.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 24th, 2010 at 07:33 PM |
|
|
| Quote: | Originally
posted by 66deluxe
Wouldn't it be better to just build a Subaru drag car. So sick of suby this suby that
|
yeah i thought the same. If you want to use other than vw use porsche parts. ie. 930 box or even a 993.
you ca pick up a 933 3.6L engine for a few k and it produces 270hp na and like 420hp turbo.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on November 24th, 2010 at 10:03 PM |
|
|
Good work ttriebler, you've obviously been busy. Thanks for the update, sounds like there will be plenty on the road before too long.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 24th, 2010 at 10:07 PM |
|
|
| Quote: | Originally
posted by vlad01
| Quote: | Originally
posted by 66deluxe
Wouldn't it be better to just build a Subaru drag car. So sick of suby this suby that
|
yeah i thought the same. If you want to use other than vw use porsche parts. ie. 930 box or even a 993.
you ca pick up a 933 3.6L engine for a few k and it produces 270hp na and like 420hp turbo.
|
But they are not cheap, not easy to come by and not easy to fit, particularly if you don't want to cut through the torsion bar and body.
Otherwise everyone would be doing them. Instead they are doing Subaru conversions because they ARE cheap, easy to come by and a compact fit.
p.s. Subaru do a 3.6L engine that makes 255hp n/a
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 25th, 2010 at 04:23 AM |
|
|
| Quote: | Originally
posted by vlad01
| Quote: | Originally
posted by 66deluxe
Wouldn't it be better to just build a Subaru drag car. So sick of suby this suby that
|
yeah i thought the same. If you want to use other than vw use porsche parts. ie. 930 box or even a 993.
you ca pick up a 933 3.6L engine for a few k and it produces 270hp na and like 420hp turbo.
|
Dude if i had that kind of money i would have just brought a G50.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 25th, 2010 at 06:41 AM |
|
|
what? 4-12 k for a gearbox to much? shite! seems reasonable to me, considering what you are getting.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 25th, 2010 at 12:42 PM |
|
|
Which one of these do you run in your beast?
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on November 26th, 2010 at 10:42 AM |
|
|
| Quote: | Originally
posted by fast68
Which one of these do you run in your beast?
|
Yeah, I'd be interested to know what trans you've got in your's. Is it modded up? How have to found it?
BTW, Vlad, be happy to take you for a spin anytime your in Sydney to show you how nice a subaru can be, although I like aircoolers too. 
p.s. Todd, like Ive said before, this R/P set is a great thing. Thanx for all the hard work. Can't wait till I can change over!
|
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 26th, 2010 at 07:02 PM |
|
|
Thanks for the kind words guys. As you've shown some interest, here's a sneek peek at our latest development, the Subadaptor. Bolt your aircooled vw
or Porsche motor onto this shiney plate and flywheel and get 5 strong, slick shifting gears. Still got some work to do but I think progress is
promising...
Transmission bolts onto this side
VW/Porsche aircooled bolts onto this side
Transmission bolted up
Subie starter bolts onto transmission
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on November 26th, 2010 at 08:08 PM |
|
|
| Quote: | Originally
posted by fast68
Hi Guys
Any of you drag guys looking at trying one of these subaru box conversions??
|
Subaru 5 speed Transmission into Vanagon
http://www.thesamba.com/vw/forum/viewtopic.php?t=407222&postdays=0&po...
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 27th, 2010 at 05:05 PM |
|
|
| Quote: | Originally
posted by pete wood
| Quote: | Originally
posted by fast68
Which one of these do you run in your beast?
|
Yeah, I'd be interested to know what trans you've got in your's. Is it modded up? How have to found it?
BTW, Vlad, be happy to take you for a spin anytime your in Sydney to show you how nice a subaru can be, although I like aircoolers too.
p.s. Todd, like Ive said before, this R/P set is a great thing. Thanx for all the hard work. Can't wait till I can change over!
|
I would love to have a 930 box but that being said just be easier and better to just get a rhino cased albins gear set and quaife diff, diff ratio??
hmm don't know yet, guess that comes after the engine characteristics are know. I hear Dangerous is the man for boxes 
as for subys, they just don't have that something special that vw's do. Too many people people do suby conversions. I don't do mainstream  well seams that way these days.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
fast68
Commited Dubber
Posts: 58
Threads: 8
Registered: July 16th, 2009
Member Is Offline
Location: New Zealand
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 27th, 2010 at 06:22 PM |
|
|
| Quote: | Originally
posted by ttriebler
Thanks for the kind words guys. As you've shown some interest, here's a sneek peek at our latest development, the Subadaptor. Bolt your aircooled vw
or Porsche motor onto this shiney plate and flywheel and get 5 strong, slick shifting gears. Still got some work to do but I think progress is
promising...
Transmission bolts onto this side
VW/Porsche aircooled bolts onto this side
Transmission bolted up
Subie starter bolts onto transmission
|
Cool whats the flywheel? Custom or T1 modified?
|
|
|
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
|
| posted on November 27th, 2010 at 06:41 PM |
|
|
Looks like it is shaping up well.
You may want to make sure the cylinders and heads and tinwear on the VW engine don't interfere with the adapter.
Albins can make any crown wheel and pinion that you might want.
They make them for all VW, Porsche, Mendeola, and anything custom.
I know they make sube gear sets and dog rings, but not diff gear sets?
Problem is that for this project to be viable cost wise,(us VW people are real tight arses)
the gear set must be affordable,
and so china or India is a lot less $.
As long as you demand a certain quality standard,
they should be fine.
| Quote: | Originally
posted by westi
That's mad Alan.
|
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 27th, 2010 at 07:38 PM |
|
|
vw people tight arses ? no that is just australia 
I don't work that. Direct European descendant brought up in a European family. 
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on November 27th, 2010 at 08:09 PM |
|
|
You think aussie vw owners are tight asses? we got nothing on the yanks
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 27th, 2010 at 09:54 PM |
|
|
lol
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
ttriebler
Officially Full-On Dubber
Posts: 321
Threads: 16
Registered: January 5th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 27th, 2010 at 10:44 PM |
|
|
Albins can make any crown wheel and pinion that you might want.
They make them for all VW, Porsche, Mendeola, and anything custom.
I know they make sube gear sets and dog rings, but not diff gear sets?
No they can't. They were the very first people I went to because I didn't want to go offshore. They don't have the ability to do offset hypoid
which is what the Subie is. Vw, Porsche and Mendeola are just normal hypoid.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com |
|
|
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
|
| posted on November 28th, 2010 at 06:10 AM |
|
|
That is weird.
Unless my terminology is incorrect,
type 1, mendeola, and the Albins AGB is spiral bevel,(which means the pinion and crown wheel are on the same centre line),
but bus and some Porshe has an offset in the centre lines and IS a hypoid.
Perhaps there is a limit to the offset their machine does,
but when I did a shop tour last February they were machining the bus ones right then.
The now make a 4.125 for the 2 lt trans,(by the way).
They also had a Gleason machine going in to speed up the machining time over their Klingelnberg machine.
Both make offset gears,
but perhaps not as far offset as Subaru.
| Quote: | Originally
posted by westi
That's mad Alan.
|
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on November 29th, 2010 at 11:26 AM |
|
|
| Quote: | Originally
posted by vlad01
I would love to have a 930 box but that being said just be easier and better to just get a rhino cased albins gear set and quaife diff, diff ratio??
hmm don't know yet, guess that comes after the engine characteristics are know. I hear Dangerous is the man for boxes
as for subys, they just don't have that something special that vw's do. Too many people people do suby conversions. I don't do mainstream well seams that way these days.
|
Vlad, you are still yet to tell us what you are using.
BTW, until you are armed with the info and experience to make these sorts of judgments, I don't really think it's fair to bag Todd's setup out. The
same goes for Subaru conversions, you might not like them, but that doesn't mean they are bad per se.
|
|
|
| Pages: 1 2 3 4 |
