| [ Total Views: 1595 | Total Replies: 9 | Thread Id: 88232 ] |
|
|
 crimson ghost
Casual Dubber
Posts: 22
Threads: 2
Registered: August 14th, 2009
Member Is Offline
Location: Springfield Illinois
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2011 at 05:15 AM |
|
|
Microtech question
Do those of you running the Microtech LT10 ecu have trouble with cold start settings ?? I see lots of systems used on drag cars but would like first
hand knowledge of street cars/ weekend toys. I have heard that some have trouble with the settings changing .
Thanks for the help
Corrado VR6 turbo
Karmann Ghia EJ20
|
|
|
vw59
Slammed & Awesome Dubber
Turbo Boy
Posts: 79
Threads: 6
Registered: January 14th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2011 at 05:56 AM |
|
|
Hi,
No microtech have a great cold start, it's one of it's great features. The best place for the temp sensor is in the head, this will pull the fuel
back out of the engine quicker as it warms up faster than a sump mounted sensor.
It will take a few mornings to setup and can be trial and error. Ensure you are changing the temp map and add some timing into the idle map for temp
compensation.
If you can borrow a lamba sensor for a day or so this will get you into the ball park quicker. Often people richen up the map for idle thinking it is
starving of fuel where often it is over rich.
Hope this helps.
A 12 sec street car that is street driven!
|
|
|
GTMac
A.k.a.: Andrew
Fahrvergnugen
Posts: 976
Threads: 246
Registered: November 24th, 2004
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always asleep
|
| posted on January 21st, 2011 at 10:34 PM |
|
|
What vw59 said!
I did not have a cold start for 4 years, thats why my bag of spanners sat under my seat and then rested on the accelerator until I came outside again
5min later. Its just been fixed, not as good as factory but a couple of blips on the pedal and its pretty good to go.
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 
How many sets of lights does it take a $229k Carrera S to learn? 
UPDATE: Cayman S, M3, B4 now added to the list. |
|
|
crimson ghost
Casual Dubber
Posts: 22
Threads: 2
Registered: August 14th, 2009
Member Is Offline
Location: Springfield Illinois
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 22nd, 2011 at 12:30 AM |
|
|
Thanks guys ! Any other info or build threads would be great.
My motor and trans is in and I hope to be making progress in the next couple of weeks.
Corrado VR6 turbo
Karmann Ghia EJ20
|
|
|
20bkombi
Wolfsburg Wizard
Posts: 597
Threads: 26
Registered: March 2nd, 2009
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 30th, 2011 at 07:32 PM |
|
|
How did you go with the microtech and tune?
Aaron.
AARON'S SPEED SHIFT AUTOS
Specialising in Vw automatic transmissions, differentials and torque converters
Stock or modified to suit your application (street, drag, off road)
Ph 0402 233 027
|
|
|
Jak Rizzo
Insano Dub Head
Posts: 837
Threads: 67
Registered: April 26th, 2004
Member Is Offline
Location: Central Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: Pastizzi eating
|
| posted on January 31st, 2011 at 06:17 AM |
|
|
My cold start was almost spot on straight from Microtech, in the middle of winter it takes 2 turns of the key, but otherwise it's perfect.
regards
jak
|
|
|
DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on January 31st, 2011 at 09:38 AM |
|
|
Cold start was Perfect. Out of the box with my lt10
Steff......
Life with out a v-dub is no life at all!!!!!
|
|
|
crimson ghost
Casual Dubber
Posts: 22
Threads: 2
Registered: August 14th, 2009
Member Is Offline
Location: Springfield Illinois
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 25th, 2011 at 05:13 AM |
|
|
Ok guys here's my new question. I bought my ECU from someone that had what I think was an EJ22t start up tune on it but my engine is a JDM EJ20. Do
you think I will have any start up problems because of coil pack vs. coil on plug ?? Sorry if this sounds like a dumb question but I am new to
standalone.
Thanks again for the help.
Corrado VR6 turbo
Karmann Ghia EJ20
|
|
|
20bkombi
Wolfsburg Wizard
Posts: 597
Threads: 26
Registered: March 2nd, 2009
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 29th, 2011 at 06:53 AM |
|
|
Hi Bobby, don't think it will start the jdm EJ20, cause the EJ20 only uses 1 crank pick up and i know the old 22s have another on the cam pully.
Threr is room for another sensor on the 20, but the pickups on the back of the pully would be different, Ithink?.... you might need a EJ25na pully
I think the coil wiring is different too.
Is the EJ22t dohc
Aaron
AARON'S SPEED SHIFT AUTOS
Specialising in Vw automatic transmissions, differentials and torque converters
Stock or modified to suit your application (street, drag, off road)
Ph 0402 233 027
|
|
|
crimson ghost
Casual Dubber
Posts: 22
Threads: 2
Registered: August 14th, 2009
Member Is Offline
Location: Springfield Illinois
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 29th, 2011 at 07:05 AM |
|
|
Thanks for the reply Aaron. As far as knowing much about the EJ22 tune that's on it, I am unsure.
I'm not on good terms with the person I bought it off of and don't want to ask.
Sounds like I may have to suck it up and ship it to Microtech for a propper flash.
Corrado VR6 turbo
Karmann Ghia EJ20
|
|
|
