| [ Total Views: 851 | Total Replies: 7 | Thread Id: 88691 ] |
|
|
 dAVo
Seriously Crusin Dubber
Posts: 161
Threads: 8
Registered: March 24th, 2009
Member Is Offline
Location: Brisbane/Gold Coast
Theme: UltimaBB Pro Black
|
 posted on February 12th, 2011 at 11:47 AM |
|
|
Oil Leak
Hey all.
Not too long ago I went out into the garage to get my bike out to go to work and noticed quite a bit of oil on the floor under my Bug (1966). It was
more towards the front of the car mainly under the gearbox area.
I'm pretty sure it wasn't engine oil because it was quite clean and not the sooty black colour it normally is. Probably about six months ago I had
the clutch replaced so I'm assuming the mechanic had put some new tranny fluid in but since the clutch replacement I haven't really driven it too
much at all. Maybe about 1500 miles if that.
Where do you guys think this is likely to be coming from? The first thing I was thinking it could be is the axel boot. Maybe they have a split I
can't see or something because when I squeeze them I hear air coming out from somewhere. Or is there somewhere else this could be coming from that
would be more likely?
Cheers guys.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on February 12th, 2011 at 11:53 AM |
|
|
You'll know if its tranny oil, it f'king stinks.
I'm willing to bet it one of the axle boots but failing that input shaft seal is the other main place the tranny leaks
The nose cone does leak over time but it's a gradual thing, doesnt just start dripping oil one day.
|
|
|
dAVo
Seriously Crusin Dubber
Posts: 161
Threads: 8
Registered: March 24th, 2009
Member Is Offline
Location: Brisbane/Gold Coast
Theme: UltimaBB Pro Black
|
| posted on February 12th, 2011 at 12:00 PM |
|
|
Ah cool thanks mate. I am waiting for the missus to come home so I can go get some oil and stuff. Might take the boots off and see if they are split
somewhere.
Thanks for the quick reply.
|
|
|
Sides
A.k.a.: Dave Sidery
Veteran Volks Folk
Posts: 2220
Threads: 59
Registered: May 20th, 2007
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Need... more... shed... time...
|
| posted on February 12th, 2011 at 02:07 PM |
|
|
Joel's understating the smell... if it's trans oil you'd smell it as soon as went into your garage !!!
Take a look at where the puddle is:
- offset slightly to either side of centerline will be an axle boot (the often dribble over the frame horn also)
- centerline, but towards front of gearbox will be nose cone or maybe the drain plug
- centerline, but towards engine will be input shaft seal - it drips out of the bottom of bellhousing
To do the clutch is an engine out job... you don't actually remove the gearbox... so I doubt he would've touched the trans oil at all.
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on February 12th, 2011 at 03:39 PM |
|
|
| Quote: | Originally
posted by dAVo
Hey all.
Not too long ago I went out into the garage to get my bike out to go to work and noticed quite a bit of oil on the floor under my Bug (1966). It was
more towards the front of the car mainly under the gearbox area.
I'm pretty sure it wasn't engine oil because it was quite clean and not the sooty black colour it normally is. Probably about six months ago I had
the clutch replaced so I'm assuming the mechanic had put some new tranny fluid in but since the clutch replacement I haven't really driven it too
much at all. Maybe about 1500 miles if that.
Where do you guys think this is likely to be coming from? The first thing I was thinking it could be is the axel boot. Maybe they have a split I
can't see or something because when I squeeze them I hear air coming out from somewhere. Or is there somewhere else this could be coming from that
would be more likely?
Cheers guys.
|
gearbox transaxle should have Hypoid oil in it....
and is very smelly.....
unless the mechanic put some different oil in it?????
or rear gearbox seal.... smelly oil again...
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
dAVo
Seriously Crusin Dubber
Posts: 161
Threads: 8
Registered: March 24th, 2009
Member Is Offline
Location: Brisbane/Gold Coast
Theme: UltimaBB Pro Black
|
| posted on February 12th, 2011 at 06:04 PM |
|
|
Ah I see. I did say it was a short while ago that I noticed it but now I think about it it might have been a while ago so I don't really remember if
it smelt bad. Although I did have a better look at it with the wheel off earlier today and can see that it is fairly oily and wet around the base of
the boot. From what I could see in there, there also seems to be a bit of a gap or something in the seam of the boot also at the base where the ring
clamp goes around.
I'm pretty sure it's definitely coming slightly from the side like what Sides said. I didn't really look towards the front much at all but I don't
think it looked like there was anything coming from there. Not sure about towards the back though. It is a littly oily as well but that is probably
from it beeing blown back there.
Didn't get a chance to get any parts or oil today so I'll be going to get some through the week and hopefully that makes a difference.
Thanks guys!
|
|
|
stagvee40
Commited Dubber
Posts: 68
Threads: 14
Registered: January 20th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 14th, 2011 at 07:23 PM |
|
|
Very good advice here, also if you overfill the gearbox marginally it promotes leaking in the axle boot/input shaft area, and put the axle boot back
on with some gasket cement (if its not split) that never hurts
|
|
|
VolksVair
Officially Full-On Dubber
Posts: 252
Threads: 32
Registered: April 6th, 2010
Member Is Offline
Location: Geelong VIC
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 17th, 2011 at 11:47 AM |
|
|
Oh and incase you do replace the split seam axle boots, dont make the same mistake as others have by installing them with the split seam facing up,
seam flange needs to be installed facing either the front or rear of car. If installed facing up, there is no flex in the boot as the swing axle
goes up & down, hence, early boot failure. If some one has allready touched on this subject, sorry. cheers Frank
Adventure Before Dimentia
|
|
|
